- 您现在的位置：买卖IC网 > PDF目录258907 > EK1001-7EPD3 1-OUTPUT DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | EK1001-7EPD3 |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| 封装： | HEAT SINK, METAL, CASE K02, MODULE |
| 文件页数： | 1/27页 |
| 文件大小： | 640K |
| 代理商： | EK1001-7EPD3 |
当前第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页
K-Family
DC-DC Converters >100 W
Rugged Environment
8 - 2
Edition 2/96 - Melcher AG
MELCHER
The Power Partners.
8.1
150 W DC-DC (AC-DC) Converters
K-Family
Input to output isolation
Single output:
AK...LK 1000
Double output: AK...LK 2000
Extremely wide input voltage range
Input over- and undervoltage lock-out
Efficient input filter and built-in surge and transient
suppression circuitry
4 kVrms input to output isolation test voltage
Fully isolated outputs
Outputs open- and short-circuit proof
No derating over entire operating temperature range
Safety according to IEC 950
V
DE
C
Table of Contents
Page
Description .................................................................. 8 - 2
Type Survey ................................................................ 8 - 3
Safety and Installation Instructions ............................. 8 - 4
Functional Description ................................................. 8 - 6
Electrical Input Data .................................................... 8 - 7
Electromagnetic Compatibility EMC ............................ 8 - 9
Electrical Output Data ............................................... 8 - 11
Supplementary Data ................................................. 8 - 19
Description of Options ............................................... 8 - 19
Immunity to Environmental Conditions ...................... 8 - 26
Mechanical Data ....................................................... 8 - 27
Type Key and Product Marking ................................. 8 - 28
Description
Full input to output, input to case, output to case and output
to output isolation is provided. The modules are designed
and built according to the international safety standards
IEC 950 and have been approved by the safety agencies
VDE (Germany) and UL (USA). The UL Mark for Canada
has been officially recognized be regulatory authorities in
provinces across Canada.
The case design allows operation at nominal load up to
71
°C in a free air ambient temperature. If forced cooling is
provided, the ambient temperature may exceed 71
°C but
the case temperature must remain below 95
°C under all
conditions.
A temperature sensor generates an inhibit signal which
disables the outputs if the case temperature
TC exceeds the
limit. The outputs are automatically re-enabled when the
temperature drops below the limit.
Various options are available to adapt the converters to in-
dividual applications.
The modules may either be plugged into 19 inch rack sys-
tems according to DIN 41494, or be chassis mounted.
Case: Aluminium, black finish, self cooling.
The K-family of DC-DC (AC-DC) converters represents a
broad and flexible range of power supplies for use in ad-
vanced electronic systems. Features include high effi-
ciency, high reliability, low output voltage noise and excel-
lent dynamic response to load/line changes.
The converter inputs are protected against surges and tran-
sients occuring on the source lines. Input over- and
undervoltage lock-out circuitry disables the outputs if the
input voltage is outside the specified ranges. Certain types
include an inrush current limitation preventing circuit break-
ers and fuses from being damaged at switch-on.
All outputs are open- and short-circuit proof and are pro-
tected against overvoltages by means of a built-in suppres-
sor diode. The outputs can be inhibited by a logic signal ap-
plied to the connector pin i. If the inhibit function is not used
pin 18 must be connected with pin 14 to enable the outputs.
LED indicators display the status of the converter and allow
visual monitoring of the system at any time.
相关PDF资料 |
PDF描述 |
|---|---|
| EK1001-7EPD6 | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| EK1001-7ERV2T | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| EK1001-7PV0B1 | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| EK1001-9EPD3B1 | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
| EK1001-9EPD4TB1 | 1-OUTPUT DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EK-1008AS-J | 功能描述:电感器套件及配件 1008 CASE 5% TOL 10 EACH-28 VALUES RoHS:否 制造商:Bourns 产品:SMD Inductor Kits 端接类型: 电感范围: |
| EK10201 | 制造商:Square D by Schneider Electric 功能描述:KIT, ELECTRICAL INTERLOCK SWITCH |
| EK10202 | 制造商:Schneider Electric 功能描述:KIT, ELECTRICAL INTERLOCK SWITCH |
| EK1020X05XA_D5X WAF | 制造商:Fairchild Semiconductor Corporation 功能描述: |
| EK104PMLBBHFL | 制造商:Airborn Inc 功能描述: |
发布紧急采购，3分钟左右您将得到回复。