参数资料
型号: EK54
厂商: Apex Microtechnology Corporation
英文描述: EVALUATION KIT FOR PA60DK
中文描述: 评估板PA60DK
文件页数: 1/2页
文件大小: 269K
代理商: EK54
INTRODUCTION
Fast and easy breadboarding of circuits using the PA60DK
is possible with the EK54 evaluation kit. The EK54 includes
both the universal EVAL36 board and the EVAL46 substrate.
The use of EVAL36 and EVAL46 allows for a large area of
breadboarding space to work with while allowing a surface
mount substrate for the PA60DK. The PA60DK amplier may be
surface mounted directly to the EVAL46, a thermally conductive
but electrically isolated substrate. The PA60DK is soldered to
a DUT foil footprint area the size of the heatslug as shown in
Figure 1. The metal substrate is cost effective and can allow
the PA60DK to dissipate power up to the datasheet rating.
Part#
Description
Quantity
EVAL36
Universal PC Board
1
EVAL46
Evaluation substrate, PA60DK
1
TSM-116-01-T-SV Terminal Strip, 16 PIN
2
SSW-116-01-T-S
Socket Strip, 16 PIN
2
PCE2055CT-ND
CAP, 47uF, 50V
2
OX7R105KWN
Cap, 200V, 1uF, Ceramic
2
*031606
5V, 10mA, 3.4°C/W
heatsink with fan, AAVID
1
* Parts are not supplied. Parts are application dependant.
Suggested part numbers are provided.
Figure 1
BEFORE YOU GET STARTED
All Apex ampliers should be handled using ESD precau-
tion.
Review the Apex product datasheet and operating condi-
tions.
Always provide the appropriate heat sinking. Power dis-
sipation must be considered to ensure maximum junction
temperature (TJ) is not exceeded.
Always use adequate power supply bypass capacitors, Apex
recommends at least 10F per amp of output current.
Do not change connections while the circuit is powered
In case -Vs is disconnected before +Vs, a diode between
-Vs and ground is recommended to avoid damage.
Initially set all power supplies to the minimum operating
levels allowed in the product datasheet.
Check for oscillations up to and above the unity gain band-
width of the amplier.
ASSEMBLY
The PA60DK is a surface mount device and should be
assembled to the EVAL46 substrate using surface mount
processes. Solder paste may be dispensed or screen-printed
on the DUT pads. The heat slug on the back of the PA60DK
provides maximum heat dissipation capabilities when soldered
to the foil footprint area. The PA60DK should be reowed
to the substrate using a solder reow furnace. If this is not
available, a heat plate capable of solder reow temperatures
may be used.
Once the amplier is mounted on the
top of the substrate, the heat sink fan or
selected heat sink can then be mounted
to the back of the substrate. A heat sink
is not supplied with the kit, but several
options are available through AAVID
Thermal Product, Inc. High thermal con-
ductive thermal grease should be used
when mounting the heat sink fan or heat
sink to the evaluation board.
Review Figure 2 on next page for other
possible assembly methods to construct
this evaluation kit.
APEX MICROTECHNOLOGY CORPORATION TELEPHONE (520) 690-8600 FAX (520) 888-3329 ORDERS (520) 690-8601 EMAIL prodlit@apexmicrotech.com
1
相关PDF资料
PDF描述
EK55 EVALUATION KIT FOR PA62DK
EK56 EVALUATION KIT FOR MSA 260KC PINOUT
EK59 EVALUATION KIT MP38CL & MP9
EKE Low Voltage Tungsten Halogen Lamps with Reflector
EL0304RA-151K 1 ELEMENT, 150 uH, GENERAL PURPOSE INDUCTOR
相关代理商/技术参数
参数描述
EK55 功能描述:放大器 IC 开发工具 Eval Kit PA62DK RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V
EK5506X05XA-D5X WAF 制造商:Fairchild Semiconductor Corporation 功能描述:
EK56 功能描述:放大器 IC 开发工具 Eval Kit MSA240 MSA260 RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V
EK57 功能描述:放大器 IC 开发工具 Eval Kit MP108FD MP111FD RoHS:否 制造商:International Rectifier 产品:Demonstration Boards 类型:Power Amplifiers 工具用于评估:IR4302 工作电源电压:13 V to 23 V
EK5808X05XA_D5X WAF 制造商:Fairchild Semiconductor Corporation 功能描述: