- 您现在的位置：买卖IC网 > PDF目录97902 > EL2480CS-T13 250MHz / 3mA Current Mode Feedback Amplifiers PDF资料下载
参数资料
| 型号： | EL2480CS-T13 |
| 元件分类： | 运算放大器 |
| 英文描述： | 250MHz / 3mA Current Mode Feedback Amplifiers |
| 中文描述： | 250MHz的/ 3mA的电流模式反馈放大器 |
| 文件页数： | 2/17页 |
| 文件大小： | 661K |
| 代理商： | EL2480CS-T13 |
10
EL2180C/EL2280C/EL2480C-Preliminary
250MHz / 3mA Current Mode Feedback Amplifiers
E
L
21
80
C
/E
L
22
80
C
/E
L
24
80
C
-P
re
lim
in
ar
y
Applications Information
Product Description
The EL2180C/EL2280C/EL2480C are current-feedback
operational amplifiers that offer a wide -3dB bandwidth
of 250MHz and a low supply current of 3mA per ampli-
fier. All of these products also feature high output
current drive. The EL2180C can output 100mA, while
the EL2280C and the EL2480C can output 55mA per
amplifier. The EL2180C/EL2280C/EL2480C work with
supply voltages ranging from a single 3V to ±6V and
they are also capable of swinging to within 1V of either
supply on the input and the output. Because of their cur-
rent-feedback topology, the EL2180C/EL2280C/
EL2480C do not have the normal gain-bandwidth prod-
uct associated with voltage-feedback operational
amplifiers. This allows their -3dB bandwidth to remain
relatively constant as closed-loop gain is increased. This
combination of high bandwidth and low power, together
with aggressive pricing make the EL2180C/EL2280C/
EL2480C the ideal choice for many low-power/high-
bandwidth applications such as portable computing,
HDSL, and video processing.
For applications where board space is extremely critical,
the EL2180C is available in the tiny 5-pin SOT23 pack-
age, which has a footprint 28% the size of an 8-pin SO.
The EL2480C is available in the 24-pin LPP package,
offering board space savings and better power dissipa-
tion compared to the SO and PDIP packages. The
EL2180C/EL2280C/EL2480C are each also available in
industry-standard pinouts in PDIP and SO packages.
For single, dual, and triple applications with disable,
consider the EL2186C (8-pin single), EL2286C (14-pin
dual), and EL2386C (16-pin triple). If lower power is
required, refer to the EL2170C/EL2176C family which
provides singles, duals, and quads with 70MHz of band-
width while consuming 1mA of supply current per
amplifier.
Power Supply Bypassing and Printed Circuit
Board Layout
As with any high-frequency device, good printed circuit
board layout is necessary for optimum performance.
Ground plane construction is highly recommended.
Lead lengths should be as short as possible. The power
supply pins must be well bypassed to reduce the risk of
oscillation. The combination of a 4.7F tantalum capac-
itor in parallel with a 0.1F capacitor has been shown to
work well when placed at each supply pin.
For good AC performance, parasitic capacitance should
be kept to a minimum especially at the inverting input
(see the Capacitance at the Inverting Input section).
Ground plane construction should be used, but it should
be removed from the area near the inverting input to
minimize any stray capacitance at that node. Carbon or
Metal-Film resistors are acceptable with the Metal-Film
resistors giving slightly less peaking and bandwidth
because of their additional series inductance. Use of
sockets, particularly for the SO package, should be
avoided if possible. Sockets add parasitic inductance and
capacitance which will result in some additional peaking
and overshoot.
Capacitance at the Inverting Input
Any manufacturer's high-speed voltage- or current-feed-
back amplifier can be affected by stray capacitance at
the inverting input. For inverting gains this parasitic
capacitance has little effect because the inverting input is
a virtual ground, but for non-inverting gains this capaci-
tance (in conjunction with the feedback and gain
resistors) creates a pole in the feedback path of the
amplifier. This pole, if low enough in frequency, has the
same destabilizing effect as a zero in the forward open-
loop response. The use of large value feedback and gain
resistors further exacerbates the problem by further low-
ering the pole frequency.
The experienced user with a large amount of PC board
layout experience may find in rare cases that the
EL2180C/EL2280C/EL2480C have less bandwidth than
expected.
The reduction of feedback resistor values (or the addi-
tion of a very small amount of external capacitance at
the inverting input, e.g. 0.5pF) will increase bandwidth
as desired. Please see the curves for Frequency
Response for Various RF and RG, and Frequency
Response for Various CIN-.
相关PDF资料 |
PDF描述 |
|---|---|
| EL2480CS-T7 | 250MHz / 3mA Current Mode Feedback Amplifiers |
| EL2480CS | 250MHz / 3mA Current Mode Feedback Amplifiers |
| EL2480CL-T7 | 250MHz / 3mA Current Mode Feedback Amplifiers |
| EL2480CL | 250MHz / 3mA Current Mode Feedback Amplifiers |
| EL2480CN | 250MHz / 3mA Current Mode Feedback Amplifiers |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EL2480CS-T7 | 功能描述:IC OP AMP QUAD LP 250MHZ 14-SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:1,000 系列:- 放大器类型:电压反馈 电路数:4 输出类型:满摆幅 转换速率:33 V/µs 增益带宽积:20MHz -3db带宽:30MHz 电流 - 输入偏压:2nA 电压 - 输入偏移:3000µV 电流 - 电源:2.5mA 电流 - 输出 / 通道:30mA 电压 - 电源，单路/双路(±):4.5 V ~ 16.5 V，±2.25 V ~ 8.25 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-SOIC（0.154"，3.90mm 宽） 供应商设备封装:14-SOIC 包装:带卷 (TR) |
| EL2480CSZ | 功能描述:高速运算放大器 EL2480CSZ 250MHZ QUA D CMF OP AMP 5V RoHS:否 制造商:Texas Instruments 通道数量:1 电压增益 dB:116 dB 输入补偿电压:0.5 mV 转换速度:55 V/us 工作电源电压:36 V 电源电流:7.5 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| EL2480CSZ | 制造商:Intersil Corporation 功能描述:IC AMP CURRENT MODE FEEDBACK SMD |
| EL2480CSZ-T13 | 功能描述:高速运算放大器 EL2480CSZ 250 MHZ QD CMF OP AMP 5 V RoHS:否 制造商:Texas Instruments 通道数量:1 电压增益 dB:116 dB 输入补偿电压:0.5 mV 转换速度:55 V/us 工作电源电压:36 V 电源电流:7.5 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| EL2480CSZ-T7 | 功能描述:高速运算放大器 EL2480CSZ 250 MHZ QD CMF OP AMP 5 V RoHS:否 制造商:Texas Instruments 通道数量:1 电压增益 dB:116 dB 输入补偿电压:0.5 mV 转换速度:55 V/us 工作电源电压:36 V 电源电流:7.5 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。