参数资料
| 型号： | EL5106IW-T7A |
| 厂商： | Intersil |
| 文件页数： | 13/13页 |
| 文件大小： | 0K |
| 描述： | IC OP AMP HS VF 300MHZ SOT-23-6 |
| 标准包装： | 250 |
| 放大器类型： | 通用 |
| 电路数： | 1 |
| 转换速率： | 4500 V/µs |
| -3db带宽： | 380MHz |
| 电流 - 输入偏压： | 1.5µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 1.5mA |
| 电流 - 输出 / 通道： | 100mA |
| 电压 - 电源，单路/双路(±)： | 5 V ~ 12 V，±2.5 V ~ 6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-6 |
| 供应商设备封装： | SOT-23-6 |
| 包装： | 带卷 (TR) |
9
FN7357.7
June 6, 2012
Current Limiting
The EL5106 and EL5306 have no internal current-limiting
circuitry. If the output is shorted, it is possible to exceed the
Absolute Maximum Rating for output current or power
dissipation, potentially resulting in the destruction of the
device.
Power Dissipation
With the high output drive capability of the EL5106 and
EL5306, it is possible to exceed the +125°C Absolute
Maximum junction temperature under certain very high load
current conditions. Generally speaking when RL falls below
about 25
Ω, it is important to calculate the maximum junction
temperature (TJMAX) for the application to determine if
power supply voltages, load conditions, or package type
need to be modified for the EL5106 and EL5306 to remain in
the safe operating area. These parameters are calculated as
shown in Equation 1:
where:
TMAX = Maximum ambient temperature
θJA = Thermal resistance of the package
n = Number of amplifiers in the package
PDMAX = Maximum power dissipation of each amplifier in
the package
PDMAX for each amplifier can be calculated as shown in
Equation 2:
where:
VS = Supply voltage
ISMAX = Maximum bias supply current
VOUTMAX = Maximum output voltage (required)
RL = Load resistance
T
JMAX
T
MAX
θ
JA
nPD
MAX
×
()
+
=
(EQ. 1)
PD
MAX
2
(
V
S
I
SMAX )
V
S
(
- V
OUTMAX )
V
OUTMAX
R
L
----------------------------
×
+
×
=
(EQ. 2)
Revision History
DATE
REVISION
CHANGE
April 25, 2012
FN7357.7
Removed obsolete part EL5106IS from “Order Information” page 1.
Corrected Pkg Dwg # in “Order Information” page 1 for EL5306ISZ parts from M8.15E to
MDP0027.
Changed Min/Max limits for “VOS” on page 3 from -10/10mV to -15/15mV. Added “Output
offset voltage including Ib*RF term” to conditions column. Changed Description from “Offset
Voltage” to “Specified Offset Voltage”.
Added package outline drawing MDP0027 to page 13.
June 4, 2009
FN7357.6
Removed obsolete, leaded devices EL5106IW-T7, EL5106IW-T7A; EL5106IS-T7, EL5106IS-
T13; EL5306IS, EL5306IS-T7, EL5306IS-T13; EL5306IU, EL5306IU-T7, EL5306IU-T13
Corrected Figure references in “Gain Setting” on page 7 (Fig 14 callout was referencing Fig
13; Fig 15 callout was referencing Fig 14; Fig 16 callout was referencing Fig 15) .
Updated pin descriptions to match pin names of EL5306.
Applied Intersil Standards: Updated Pb-free bullet in Features, Updated ordering information
by removing tape and reel column and adding standard reference note and updating note to
match lead finish, updated caution statement to legal's suggested verbiage. Changed date
and Rev'd to 6.
Updated Package Outline Drawing MDP0038 toP6.064A - P6.064A replaces 6 Ld SOT-23
(same dimensions, just MDP0038 had both 5 & 6 Ld SOT23s w/dimensions listed in table)
Updated Package Outline Drawing MDP0027 to M8.15E - M8.15E replaces MDP0027 8 Ld
SOIC (same dimensions, just MDP0027 had 8, 14, 16, 20, 24, 28 Ld SOICS with dimensions
listed in table)
P1, added Note 3 "The part marking is located on the bottom of the part" for SOT-23 package
Added Revision History table.
EL5106, EL5306
相关PDF资料 |
PDF描述 |
|---|---|
| 3404.0049.11 | FUSE 125MA 125V FAST-ACT SMD |
| 3402.0003.11 | FUSE 63MA 63V FAST-ACT SMD |
| RGH2012-2E-P-224-B | RES 220K OHM .1% 1/4W 0805 SMD |
| 3404.0044.11 | FUSE 375MA 125V FAST-ACT SMD |
| 3402.0020.11 | FUSE 8A 63V FAST-ACT SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EL5106IWZ-T7 | 功能描述:高速运算放大器 EL5106IWZ SINGLE 300 MHZ FGAW ENABLE RoHS:否 制造商:Texas Instruments 通道数量:1 电压增益 dB:116 dB 输入补偿电压:0.5 mV 转换速度:55 V/us 工作电源电压:36 V 电源电流:7.5 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| EL5106IWZ-T7A | 功能描述:高速运算放大器 EL5106IWZ SINGLE 300 MHZ FGAW ENABLE RoHS:否 制造商:Texas Instruments 通道数量:1 电压增益 dB:116 dB 输入补偿电压:0.5 mV 转换速度:55 V/us 工作电源电压:36 V 电源电流:7.5 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| EL5108 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
| EL5108_06 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
| EL5108_07 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
发布紧急采购，3分钟左右您将得到回复。