参数资料
| 型号： | EL5106IWZ-T7A |
| 厂商： | Intersil |
| 文件页数： | 13/13页 |
| 文件大小： | 0K |
| 描述： | IC AMP FGA SGL 300MHZ SOT23-6 |
| 标准包装： | 250 |
| 放大器类型： | 通用 |
| 电路数： | 1 |
| 转换速率： | 4500 V/µs |
| -3db带宽： | 380MHz |
| 电流 - 输入偏压： | 1.5µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 1.5mA |
| 电流 - 输出 / 通道： | 100mA |
| 电压 - 电源，单路/双路(±)： | 5 V ~ 12 V，±2.5 V ~ 6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOT-23-6 |
| 供应商设备封装： | SOT-23-6 |
| 包装： | 带卷 (TR) |
9
FN7357.7
June 6, 2012
Current Limiting
The EL5106 and EL5306 have no internal current-limiting
circuitry. If the output is shorted, it is possible to exceed the
Absolute Maximum Rating for output current or power
dissipation, potentially resulting in the destruction of the
device.
Power Dissipation
With the high output drive capability of the EL5106 and
EL5306, it is possible to exceed the +125°C Absolute
Maximum junction temperature under certain very high load
current conditions. Generally speaking when RL falls below
about 25
Ω, it is important to calculate the maximum junction
temperature (TJMAX) for the application to determine if
power supply voltages, load conditions, or package type
need to be modified for the EL5106 and EL5306 to remain in
the safe operating area. These parameters are calculated as
shown in Equation 1:
where:
TMAX = Maximum ambient temperature
θJA = Thermal resistance of the package
n = Number of amplifiers in the package
PDMAX = Maximum power dissipation of each amplifier in
the package
PDMAX for each amplifier can be calculated as shown in
Equation 2:
where:
VS = Supply voltage
ISMAX = Maximum bias supply current
VOUTMAX = Maximum output voltage (required)
RL = Load resistance
T
JMAX
T
MAX
θ
JA
nPD
MAX
×
()
+
=
(EQ. 1)
PD
MAX
2
(
V
S
I
SMAX )
V
S
(
- V
OUTMAX )
V
OUTMAX
R
L
----------------------------
×
+
×
=
(EQ. 2)
Revision History
DATE
REVISION
CHANGE
April 25, 2012
FN7357.7
Removed obsolete part EL5106IS from “Order Information” page 1.
Corrected Pkg Dwg # in “Order Information” page 1 for EL5306ISZ parts from M8.15E to
MDP0027.
Changed Min/Max limits for “VOS” on page 3 from -10/10mV to -15/15mV. Added “Output
offset voltage including Ib*RF term” to conditions column. Changed Description from “Offset
Voltage” to “Specified Offset Voltage”.
Added package outline drawing MDP0027 to page 13.
June 4, 2009
FN7357.6
Removed obsolete, leaded devices EL5106IW-T7, EL5106IW-T7A; EL5106IS-T7, EL5106IS-
T13; EL5306IS, EL5306IS-T7, EL5306IS-T13; EL5306IU, EL5306IU-T7, EL5306IU-T13
Corrected Figure references in “Gain Setting” on page 7 (Fig 14 callout was referencing Fig
13; Fig 15 callout was referencing Fig 14; Fig 16 callout was referencing Fig 15) .
Updated pin descriptions to match pin names of EL5306.
Applied Intersil Standards: Updated Pb-free bullet in Features, Updated ordering information
by removing tape and reel column and adding standard reference note and updating note to
match lead finish, updated caution statement to legal's suggested verbiage. Changed date
and Rev'd to 6.
Updated Package Outline Drawing MDP0038 toP6.064A - P6.064A replaces 6 Ld SOT-23
(same dimensions, just MDP0038 had both 5 & 6 Ld SOT23s w/dimensions listed in table)
Updated Package Outline Drawing MDP0027 to M8.15E - M8.15E replaces MDP0027 8 Ld
SOIC (same dimensions, just MDP0027 had 8, 14, 16, 20, 24, 28 Ld SOICS with dimensions
listed in table)
P1, added Note 3 "The part marking is located on the bottom of the part" for SOT-23 package
Added Revision History table.
EL5106, EL5306
相关PDF资料 |
PDF描述 |
|---|---|
| 951242-4620-AR-PR | CONN HEADER 42POS 2MM R/A SMD |
| ISL28207FRTZ-T13 | IC OPAMP PREC 1MHZ DUAL LN 8TDFN |
| MCP624T-E/SL | IC OPAMP GP 20MHZ QUAD 14SOIC |
| 155216-5203-RB | CONN HEADER 2MM 16POS R/A .155" |
| ISL28207FBZ-T7 | IC OPAMP PREC LN DUAL 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EL5108 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
| EL5108_06 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
| EL5108_07 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:450MHz Fixed Gain Amplifiers with Enable |
| EL5108IS | 功能描述:特殊用途放大器 HS VF 450MHZ RoHS:否 制造商:Texas Instruments 通道数量:Single 共模抑制比（最小值）: 输入补偿电压: 工作电源电压:3 V to 5.5 V 电源电流:5 mA 最大功率耗散: 最大工作温度:+ 70 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:QFN-20 封装:Reel |
| EL5108IS-T13 | 功能描述:IC AMP FGA SGL 450MHZ 8-SOIC RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:1.8 V/µs 增益带宽积:6.5MHz -3db带宽:4.5MHz 电流 - 输入偏压:5nA 电压 - 输入偏移:100µV 电流 - 电源:65µA 电流 - 输出 / 通道:35mA 电压 - 电源，单路/双路(±):1.8 V ~ 5.25 V，±0.9 V ~ 2.625 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽） 供应商设备封装:10-MSOP 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。