参数资料
| 型号： | EL9214IREZ-T13 |
| 厂商： | Intersil |
| 文件页数： | 10/11页 |
| 文件大小： | 0K |
| 描述： | IC AMP 4CH 100MHZ 100MA 14HTSSOP |
| 标准包装： | 2,500 |
| 放大器类型： | 电压反馈 |
| 电路数： | 4 |
| 转换速率： | 115 V/µs |
| 增益带宽积： | 63MHz |
| -3db带宽： | 130MHz |
| 电流 - 输入偏压： | 1.4µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 8.8mA |
| 电流 - 输出 / 通道： | 300mA |
| 电压 - 电源，单路/双路(±)： | 5 V ~ 13.5 V，±2.5 V ~ 6.75 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-TSSOP （0.173"，4.40mm 宽）裸露焊盘 |
| 供应商设备封装： | 14-HTSSOP |
| 包装： | 带卷 (TR) |
8
FN7007.1
August 10, 2007
Application Information
Product Description
The EL9211, EL9212, and EL9214 voltage feedback
amplifiers are fabricated using a high voltage CMOS
process. They exhibit rail-to-rail input and output capability,
are unity gain stable and have low power consumption
(2.4mA per amplifier). These features make the EL9211,
EL9212, and EL9214 ideal for a wide range of general-
purpose applications. Connected in voltage follower mode
and driving a load of 10K, the EL9211, EL9212, and EL9214
have a -3dB bandwidth of 130MHz while maintaining a
115V/s slew rate. The EL9211 is a single amplifier, EL9212
is a dual amplifier, and EL9214 is a quad amplifier.
Operating Voltage, Input, and Output
The EL9211, EL9212, and EL9214 are specified with a
single nominal supply voltage from 5V to 13.5V or a split
supply with its total range from 5V to 13.5V. Most EL9211,
EL9212, and EL9214 specifications are stable over both the
full supply range and operating temperatures of -40°C to
+85°C. Parameter variations with operating voltage and/or
temperature are shown in the typical performance curves.
Short Circuit Current Limit
The EL9211, EL9212, and EL9214 will limit the short circuit
current to 300mA if the output is directly shorted to the
positive or negative supply. If an output is shorted
indefinitely, the power dissipation could easily increase such
that the device may be damaged. Maximum reliability is
maintained if the output continuous current never exceeds
±65mA. This limit is set by the design of the internal metal
interconnects.
Output Phase Reversal
The EL9211, EL9212, and EL9214 are immune to phase
reversal as long as the input voltage is limited from
-VS -0.5V to +VS +0.5V. Although the device's output will not
change phase, the input's over-voltage should be avoided. If
an input voltage exceeds supply voltage by more than 0.6V,
electrostatic protection diodes placed in the input stage of
the device begin to conduct and over-voltage damage could
occur.
Unused Amplifiers
It is recommended that any unused amplifiers in a dual and
quad package be configured as a unity gain follower. The
inverting input should be directly connected to the output
and the non-inverting input tied to the ground plane.
Power Supply Bypassing and Printed Circuit
Board Layout
The EL9211, EL9212, and EL9214 can provide gain at high
frequency. As with any high-frequency device, good printed
circuit board layout is necessary for optimum performance.
Ground plane construction is highly recommended, lead
lengths should be as short as possible and the power supply
pins must be well bypassed to reduce the risk of oscillation.
For normal single supply operation, where the -VS pin is
connected to ground, a 0.1F ceramic capacitor should be
placed from +VS to pin and -VS to pin. A 4.7F tantalum
capacitor should then be connected in parallel, placed in the
region of the amplifier. One 4.7F capacitor may be used for
multiple devices. This same capacitor combination should be
placed at each supply pin to ground if split supplies are to be
used.
EL9211, EL9212, EL9214
相关PDF资料 |
PDF描述 |
|---|---|
| F175A3-062-D0550 | IMPELLER 175X69.3MM 24VDC 505CFM |
| F225A4-092-D0530 | IMPELLER 225X99MM 24VDC 763CFM |
| F250A5-072-D0520 | IMPLR 24VDC 250X99.8MM PWM/TACH |
| F280A1-113-D0720 | IMPLR 48VDC 280X128.7MM PWM/TACH |
| FAA1-08025NBMT31 | FAN 80X25.5MM BALL 115VAC TERM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EL9214IREZ-T7 | 功能描述:IC AMP QUAD 100MHZ 100MA14HTSSOP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:50 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:1.8 V/µs 增益带宽积:6.5MHz -3db带宽:4.5MHz 电流 - 输入偏压:5nA 电压 - 输入偏移:100µV 电流 - 电源:65µA 电流 - 输出 / 通道:35mA 电压 - 电源，单路/双路(±):1.8 V ~ 5.25 V，±0.9 V ~ 2.625 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽） 供应商设备封装:10-MSOP 包装:管件 |
| E-L9338MD | 功能描述:功率驱动器IC Quad Parallel RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| E-L9338MD/TR | 功能描述:功率驱动器IC Quad Parallel RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| EL-94-22UBC/C430 | 功能描述:标准LED-通孔 Blue Water Clear 466nm 65mcd RoHS:否 制造商:Vishay Semiconductors 照明颜色:Red 光强度:0.7 mcd 波长/色温:615 nm 显示角:45 deg 透镜颜色/类型:Clear, Non-Diffused 正向电流:70 mA 正向电压:1.83 V to 3.03 V LED 大小:2 mm 系列: 封装:Tube |
| EL-94-22UBC/C430/S2 | 功能描述:标准LED-通孔 Blue Water Clear 466nm 70mcd RoHS:否 制造商:Vishay Semiconductors 照明颜色:Red 光强度:0.7 mcd 波长/色温:615 nm 显示角:45 deg 透镜颜色/类型:Clear, Non-Diffused 正向电流:70 mA 正向电压:1.83 V to 3.03 V LED 大小:2 mm 系列: 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。