- 您现在的位置：买卖IC网 > PDF目录213101 > EN3C2MS (SWITCHCRAFT INC) 2 CONTACT(S), GLASS FILLED THERMOPLASTIC POLYMER, MALE, CIRCULAR CONNECTOR, SOLDER PDF资料下载
参数资料
| 型号： | EN3C2MS |
| 厂商： | SWITCHCRAFT INC |
| 元件分类： | 圆形连接器 |
| 英文描述： | 2 CONTACT(S), GLASS FILLED THERMOPLASTIC POLYMER, MALE, CIRCULAR CONNECTOR, SOLDER |
| 文件页数： | 4/4页 |
| 文件大小： | 772K |
| 代理商： | EN3C2MS |
BOOT
CABLE
CABLE CLAMP
COUPLING RING
CORD CONNECTOR
STEP 2:
FEED THE FREE END OF CABLE THROUGH BOOT, CABLE CLAMP,
AND COUPLING RING IN THE ORDER SHOWN.
NOTE: CUT-OFF END OF BOOT FOR LARGER THAN 0.280"
DIAMETER CABLES.
STRIP CABLE END AND CONDUCTORS AS SHOWN.
CRIMP CONDUCTORS TO CONTACTS.
USE CRIMP HAND TOOL EN3CR OR PNEUMATIC CRIMP TOOL
EN3CRAUTO WITH #26 POSITIONER EN3POS26.
INSERT CONTACTS TO CONNECTOR HOUSING PER CONTACT
ARRANGEMENTS AND INSERTION INSTRUCTIONS.
CRIMP
CUT-OFF END OF BOOT HERE FOR
LARGER THAN 0.280" DIA. CABLES
EN3 SERIES FIELD ASSEMBLY INSTRUCTIONS FOR CRIMP CONTACTS:
CONTACTS
STEP 3:
ALIGN TABS OF COUPLING RING WITH NOTCHES OF
CORD HOUSING AND PUSH COUPLING RING ONTO
CORD HOUSING.
STEP 4:
ALIGN CABLE CLAMP AND PUSH FORWARD UNTIL IT
SNAP-LOCKS ONTO THE REAR OF CONNECTOR HOUSING.
TURN NUT OF CABLE CLAMP COUNTERCLOCKWISE
UNTIL CABLE CLAMP TIGHTENS AGAINST CABLE.
STEP 5:
PUSH BOOT ALL THE WAY FORWARD, OVER
CABLE CLAMP, UNTIL FRONT END OF BOOT
SEALS TIGHTLY ONTO CONNECTOR HOUSING.
.75 19.1
.156 4.0
CABLE
CONDUCTOR
CONTACT
LOCKING DISC
CORD HOUSING
INSERTION
HAND TOOL
TYPICAL CONTACT INSERTION INSTRUCTIONS:
PLACE CONTACT IN GROOVE OF INSERTION HAND TOOL
EN3INS26. NOTE: TIP OF TOOL SHOULD BE UP AGAINST
THE SHOULDER OF CONTACT.
INSERT CONTACT INTO CORRECT CAVITY OF CONNECTOR
BODY BY APPLYING CONSTANT PRESSURE UNTIL
CONTACT BOTTOMS UP AGAINST LOCKING DISC.
NOTE: DO NOT TILT TOOL DURING THE INSERTION.
REPEAT ABOVE PROCEDURE TO INSERT ALL CONTACTS
PER CONTACT ARRANGEMENTS.
CORD WIRING SIDE VIEW
NOTCH,
PIN #1 INDICATOR
CABLE CLAMP WITH NUT
IN POSITION
CABLE CLAMP
NUT
STEP 1:
PRESS THE TWO WINGS OF CABLE CLAMP INWARD, THEN THREAD NUT CLOCKWISE ONTO CABLE CLAMP
TO THE POSITION SHOWN.
相关PDF资料 |
PDF描述 |
|---|---|
| EN3C3F16AGK | 3 CONTACT(S), GLASS FILLED THERMOPLASTIC POLYMER, FEMALE, CIRCULAR CONNECTOR, SOLDER |
| EN3C3F16AG | 3 CONTACT(S), GLASS FILLED THERMOPLASTIC POLYMER, FEMALE, CIRCULAR CONNECTOR, SOLDER |
| EN3C3F16CAGK | 3 CONTACT(S), GLASS FILLED THERMOPLASTIC POLYMER, FEMALE, CIRCULAR CONNECTOR, CRIMP |
| EN3C3F16CAG | 3 CONTACT(S), GLASS FILLED THERMOPLASTIC POLYMER, FEMALE, CIRCULAR CONNECTOR, CRIMP |
| EN3C3F16CK | 3 CONTACT(S), GLASS FILLED THERMOPLASTIC POLYMER, FEMALE, CIRCULAR CONNECTOR, CRIMP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EN3C2MX | 功能描述:标准环形连接器 2P MALE CORD TYPE RoHS:否 制造商:Hirose Connector 系列:EM-W 产品类型:Accessories 位置/触点数量:1 触点类型: 触点电镀: 安装风格:Cable 外壳材质: 端接类型:Clamp 电压额定值: |
| EN3C3F | 功能描述:CONN PLUG 3POS FEMALE CORD #20 RoHS:否 类别:连接器，互连式 >> 圆形 系列:EN3™ 产品目录绘图:63000 Series 63000 Series Front 63000 Series Side 63000 Series Cable End 63000 Series Assembly In Line 6P Mating Face 标准包装:500 系列:63000 连接器类型:插孔，母插口 位置数:6 外壳尺寸 - 插件:迷你型 DIN 外壳尺寸，MIL:- 安装类型:自由悬挂 端子:焊接 紧固型:推挽式 方向:带标记 防护等级:- 外壳材料，表面处理:青铜，镀镍 触点表面涂层:- 特点:- 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:- 工作温度:-40°C ~ 85°C 其它名称:275-1037 |
| EN3C3F | 制造商:Switchcraft 功能描述:Cord plug female 3 circuit 3 contact |
| EN3C3F | 制造商:Switchcraft 功能描述:SOCKET FREE 3 WAY |
| EN3C3F16 | 制造商:Switchcraft 功能描述:Conn Mini Weathertight F 3 POS Solder Cup ST Cable Mount 3 Terminal 1 Port Bulk |
发布紧急采购，3分钟左右您将得到回复。