- 您现在的位置：买卖IC网 > PDF目录19913 > EPC1441LC20N (Altera)IC CONFIG DEVICE 440KBIT 20-PLCC PDF资料下载
参数资料
| 型号： | EPC1441LC20N |
| 厂商： | Altera |
| 文件页数： | 5/26页 |
| 文件大小： | 0K |
| 描述： | IC CONFIG DEVICE 440KBIT 20-PLCC |
| 产品培训模块： | Three Reasons to Use FPGA's in Industrial Designs |
| 标准包装： | 588 |
| 系列： | EPC |
| 可编程类型： | OTP |
| 存储容量： | 440kb |
| 电源电压： | 3 V ~ 3.6 V，4.75 V ~ 5.25 V |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 20-LCC（J 形引线） |
| 供应商设备封装： | 20-PLCC（9x9） |
| 包装： | 管件 |
| 产品目录页面： | 604 (CN2011-ZH PDF) |
| 配用： | PLMJ1213-ND - PROGRAMMER ADAPTER 20 PIN J-LEAD |
| 其它名称： | 544-1371-5 EPC1441LC20N-ND |
Programming and Configuration File Support
Page 13
Configuration Devices for SRAM-Based LUT Devices
January 2012
Altera Corporation
Table 5 lists the programming adapter to use with each configuration device.
To program Altera configuration devices using the Quartus II software and the APU,
follow these steps:
1. Choose the Quartus II Programmer (Tools menu).
2. Load the appropriate .pof by clicking Add. The Device column displays the
device for the current programming file.
3. Insert a blank configuration device into the programming adapter’s socket.
4. Turn on the Program/Configure. You can also turn on Verify to verify the contents
of a programmed device against the programming data loaded from a
programming file.
5. Click Start.
6. After successful programming, you can place the configuration device on the PCB
to configure the FPGA device.
To program Altera configuration devices using the MAX+PLUS II software and the
APU, follow these steps:
1. Open the MAX+PLUS II Programmer.
2. Load the appropriate .pof using the Select Programming File dialog box (File
menu). By default, the Programmer loads the current project’s .pof. The Device
field displays the device for the current programming file.
3. Insert a blank configuration device into the programming adapter’s socket.
4. Click Program.
5. After successful programming, you can place the configuration device on the PCB
to configure the FPGA device.
If you are cascading EPC1 or EPC2 devices, you must generate multiple .pof. The first
device .pof have the same name as the project, while the second device .pof have the
same name as the first, but with a “_1” extension (e.g., top_1.pof).
Table 5. Programming Adapters
Device
Package
Adapter
EPC2
20
-pin J-Lead
PLMJ1213
32-pin TQFP
PLMT1213
EPC1
8-pin DIP
PLMJ1213
20-pin J-Lead
PLMJ1213
EPC1441
8-pin DIP
PLMJ1213
20-pin J-Lead
PLMJ1213
32-pin TQFP
PLMT1064
相关PDF资料 |
PDF描述 |
|---|---|
| EPC1213PC8 | IC CONFIG DEVICE 1MBIT 8-DIP |
| HBC49DRYI | CONN EDGECARD 98POS DIP .100 SLD |
| RSC05DRYI | CONN EDGECARD 10POS DIP .100 SLD |
| RBB106DHRT-S578 | CONN EDGECARD EXTEND 212POS .050 |
| HBC43DRAS | CONN EDGECARD 86POS R/A .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EPC1441LI20 | 功能描述:FPGA-配置存储器 IC - Ser. Config Mem Flash 440Kb 8 MHz RoHS:否 制造商:Altera Corporation 存储类型:Flash 存储容量:1.6 Mbit 工作频率:10 MHz 电源电压-最大:5.25 V 电源电压-最小:3 V 电源电流:50 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PLCC-20 |
| EPC1441LI20N | 功能描述:FPGA-配置存储器 IC - Ser. Config Mem Flash 440Kb 8 MHz RoHS:否 制造商:Altera Corporation 存储类型:Flash 存储容量:1.6 Mbit 工作频率:10 MHz 电源电压-最大:5.25 V 电源电压-最小:3 V 电源电流:50 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PLCC-20 |
| EPC1441PC8 | 功能描述:FPGA-配置存储器 IC - Ser. Config Mem Flash 440Kb 8 MHz RoHS:否 制造商:Altera Corporation 存储类型:Flash 存储容量:1.6 Mbit 工作频率:10 MHz 电源电压-最大:5.25 V 电源电压-最小:3 V 电源电流:50 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PLCC-20 |
| EPC1441PC8N | 制造商:Altera Corporation 功能描述:CONFIGURATION DEVICE 400KBIT 8DIP |
| EPC1441PI8 | 功能描述:FPGA-配置存储器 IC - Ser. Config Mem Flash 440Kb 8 MHz RoHS:否 制造商:Altera Corporation 存储类型:Flash 存储容量:1.6 Mbit 工作频率:10 MHz 电源电压-最大:5.25 V 电源电压-最小:3 V 电源电流:50 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PLCC-20 |
发布紧急采购，3分钟左右您将得到回复。