- 您现在的位置：买卖IC网 > PDF目录19911 > EPC1PI8 (Altera)IC CONFIG DEVICE 1MBIT 8-DIP PDF资料下载
参数资料
| 型号： | EPC1PI8 |
| 厂商： | Altera |
| 文件页数： | 4/26页 |
| 文件大小： | 0K |
| 描述： | IC CONFIG DEVICE 1MBIT 8-DIP |
| 产品培训模块： | Three Reasons to Use FPGA's in Industrial Designs |
| 标准包装： | 100 |
| 系列： | EPC |
| 可编程类型： | OTP |
| 存储容量： | 1Mb |
| 电源电压： | 3 V ~ 3.6 V，4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
| 产品目录页面： | 604 (CN2011-ZH PDF) |
| 配用： | PLMJ1213-ND - PROGRAMMER ADAPTER 20 PIN J-LEAD |
| 其它名称： | 544-1232-5 |
Page 12
Programming and Configuration File Support
Configuration Devices for SRAM-Based LUT Devices
January 2012
Altera Corporation
Programming and Configuration File Support
The Quartus II and MAX+PLUS II softwares provide programming support for Altera
configuration devices. During compilation, the Quartus II and MAX+PLUS II
softwares automatically generates a .pof, which is used to program the configuration
devices. In a multi-device configuration, the software combines the programming
files for multiple ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II,
FLEX 10K, Mercury, Stratix, Stratix GX, Stratix II, and Stratix II GX devices into one or
more configuration devices. The software allows you to select the appropriate
configuration device to store the data for each FPGA.
All Altera configuration devices are programmable using Altera programming
hardware in conjunction with the Quartus II or MAX+PLUS II software. In addition,
many third-party programmers offer programming hardware that supports Altera
configuration devices.
1 An EPC2 device can be programmed with a .pof generated for an EPC1 or EPC1441
device. An EPC1 device can be programmed with a .pof generated for an EPC1441
device.
EPC2 configuration devices can be programmed in-system through its
industry-standard four-pin JTAG interface. ISP capability in the EPC2 devices provide
ease in prototyping and FPGA functionality. When programming multiple EPC2
devices in a JTAG chain, the Quartus II and MAX+PLUS II softwares and other
programming methods employ concurrent programming to simultaneously program
multiple devices and reduce programming time. EPC2 devices can be programmed
and erased up to 100 times.
After programming an EPC2 device in-system, FPGA configuration is initiated by the
INIT
_CONF JTAG instruction of the EPC2 device. For more information, refer to
f For more information about programming and configuration support, refer to the
following documents:
■
■
■
■
■
■
You can also program the configuration devices using the Quartus II or MAX+PLUS II
software with the APU or the appropriate configuration device programming adapter.
相关PDF资料 |
PDF描述 |
|---|---|
| ECC13DREN-S13 | CONN EDGECARD 26POS .100 EXTEND |
| EPCS16SI8N | IC CONFIG DEVICE 16MBIT 8-SOIC |
| ACC26DRYN-S734 | CONN EDGECARD 52POS DIP .100 SLD |
| NCV59301DS33R4G | IC REG LDO 3.3V 3A D2PAK-5 |
| EBA10DTKT | CONN EDGECARD 20POS DIP .125 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EPC1PI8N | 功能描述:FPGA-配置存储器 IC - Ser. Config Mem Flash 1Mb 8 MHz RoHS:否 制造商:Altera Corporation 存储类型:Flash 存储容量:1.6 Mbit 工作频率:10 MHz 电源电压-最大:5.25 V 电源电压-最小:3 V 电源电流:50 uA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:PLCC-20 |
| EPC1VLC20 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Configuration EPROM |
| EPC1VLI20 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Configuration EPROM |
| EPC1VPC8 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Configuration EPROM |
| EPC1VPI8 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Configuration EPROM |
发布紧急采购，3分钟左右您将得到回复。