
9
www.semtech.com
HIGH PERFORMANCE PRODUCTS
Revision 1/December 3, 2001
AN1001
Input Configuration Options (con’d)
The internal 100
W parallel termination is optimized to
provide superior integration and performance in appli-
cations that require:
a)
differential signals
b)
point-to-point routing
c)
50
W transmission line environment.
The inclusion of the termination resistors integrates
four components normally implemented with off-chip
discrete components, thus saving considerable PC board
real estate.
Input Signal Level Conditions: SK44XX
VCC
VEE
1.3V
3.3V
or
5.2V
700 mV
Figure H: Output Swing
VCC
VEE
4.5V
or
5.2V
1.9V
1.4V
Figure I: Output Swing
VCC
VEE
1.65V
3.3V
or
5.2V
350 mV
At destination
(double termination)
Figure J: Output Swing
Output Signal Level Conditions
Figure G: Input Swing
VIL
VIH
VCC
VEE
Min.
0.2V
Min.
2.0V
These devices accept a wide range of input levels. The
input levels can be as low as 200 mV and as high as
4.3V peak-to-peak.
Refer to the data sheet for spe-
cific input levels. (See Figure G for more detail.)
Figure H shows output signal levels for the following
devices: SK4400, SK4410, SK4425, SK4435.
Figure I shows output signal levels for the following
devices: SK4401, SK4411.
Figure J shows output signal levels for the following
devices:
SK4404, SK4414, SK4426, SK4430,
SK4439, SK4440.
Figure K: Output Swing
VGG
VEE
700 mV
1.3V
Figure K shows output signal levels for SK4436.