- 您现在的位置：买卖IC网 > PDF目录2033 > ER-VWCC2 (Panasonic Electric Works - ACSD)CABLE W/ CONNECTOR 2M LENGTH PDF资料下载
参数资料
| 型号： | ER-VWCC2 |
| 厂商： | Panasonic Electric Works - ACSD |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | CABLE W/ CONNECTOR 2M LENGTH |
| 标准包装： | 1 |
| 系列： | ER-VW, SUNX |
| 附件类型： | 适配器，线缆 |
| 适用于相关产品： | 电离器 |
| 技术规格： | 6'（2m） |
| 其它名称： | 1110-1002 |
Thin Type Ionizer
ER-VW
1096
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
LIGHT
CURTAINS
PRESSURE /
FLOW
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
ENDOSCOPE
LASER
MARKERS
PLC /
TERMINALS
HUMAN
MACHINE
INTERFACES
ENERGY
CONSUMPTION
VISUALIZATION
COMPONENTS
FA
COMPONENTS
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Static
Removers
Cleaning
Box
Pluse
Air-gun
Electrostatic
Sensor
ER-Q
ER-F
ER-TF
ER-VW
ER-V
This product is to remove static electricity
for industrial use. Never use this product for
medical equipment etc. relating to maintenance /
supervision of human life or body, for prevention
of accidents which damage a human life or
properties, or for safety maintenance.
Do not use this product near or around
surroundings containing any dangerous
materials, such as combustible material and
flammable material.
The discharge needle gathers dust after
a long period of use. In order to prevent
accident or product malfunction, clean up the
discharge needle, periodically once every two
weeks or so, or this product will be unable to
exert the charge removal performance.
Be sure to ground the main body of this
product via ground terminal to ensure electric
shock prevention and reliable charge removal.
Since the discharge needle is live with high
voltage, never touch the discharge needle,
or an electric shock may result.
If this product is used in an airtight room, ozone
emitted from this product may be detrimental.
Therefore, in order for this product to be
used in an airtight room, be sure to keep the
room ventilated.
Since the ion air contains ozone, do not aim
this product at anyone.
Always be sure to turn off the air supply before
loosening the nozzles to carry out air flow
adjustment or for maintenance. Air pressure
may cause the discharge needle to fly out.
Furthermore, push the nozzle securely in by
hand until it touches into the enclosure of the
device afterwards, and check that the nozzle
does not move. If the nozzle is not installed
correctly, it will adversely affect charge removal
performance and the nozzle may also fall out.
Since the tip of the discharge needle is
pointed, take sufficient care in handling the
discharge needle, or injuries may result.
Mounting
When installing the unit to
its mount, use M4 pan head
screws (please arrange
separately), and tighten them
at a torque of 0.5 Nm or less.
Be sure to connect the F.G.
terminal to ground. If the unit
is not properly grounded,
charge removal performance
will be severely reduced. (Use a type D ground or a
common power supply ground.)
If grounding to a common power supply ground, you can
use the lead wire for connecting the F.G. that is supplied
with the unit to make the connection.
0 V ground: Connect pins 2 and 3 of the end connector
(9-pin) to the lead wire for connecting the F.G..
+V ground: Connect pins 1 and 3 of the end connector
(9-pin) to the lead wire for connecting the F.G..
If the ground is not connected correctly, operating
problems or accidents may occur, so be sure to
check the usage conditions and connect the ground
in such a way that the power supply does not
become shorted.
Nozzle
M4 pan head
screw
Purchase
separately.
Adjusting the air blowing direction
After screw down the nozzle to
loosen it, point it toward the object to
be charge removal. After adjusting
the position, securely tighten the
nozzle by hand until it is touching the
enclosure, and check that the nozzle
does not move. If the nozzle is not
installed correctly, it will adversely
affect charge removal performance
and the nozzle may also fall out.
The diagram at right shows the range
of adjustment for the nozzles.
100°
90°
Piping
The tube that is installed to the air intake of this device
should have an outside diameter of 6 mm 0.236 in and an
inside diameter of 4 mm 0.157 in.
The air that is supplied to this product should be dry
clean air that has been processed through an air dryer
(freezing point around –20 °C –4 °F) and an air filter
(mesh size around 0.01m 0.0004 mil).
Increasing the length of the air hose from the air supply
equipment or adding pneumatic equipments (such as
a needle valve, governor or miniature filter) will cause
drops in the pressure of the air supplied to the device,
and so do not allow the air pressure to drop below
sufficient levels. (Check the pressure applied to the
device at the air intake of the device.)
Furthermore, select air pressure equipment that is
appropriate for the level of supplied air flow.
Connections
Use the
ER-VWAR80 joint kit (optional) to connect
the devices together. (1 kit is needed for each pair of
devices.) Up to a maximum of 5 units can be connected
together (including this unit).
When using units that are connected together in this way,
attach the supplied end connector to the connector of the
last device in the series. Furthermore, also connect the
end connector to a device if not connecting the device to
any other devices.
The air joint (included in the joint kit) should be tightened
at a torque of 0.5 Nm or less.
When connecting devices together, check that the air
pressure values at the air intakes of each device are
appropriate for the usage conditions.
Connector attached
cable (Accessory)
End connector (Accessory)
Power & I/O connector (8-pin)
Cable for joint
Be supplied with joint kit
(
ER-VWAR80) (optional)
Joint connector (9-pin)
Air tube joint [Be supplied with joint kit (
ER-VWAR80) (optional)]
Air tube (6 mm 0.236 in)
(Purchase separately.)
PRECAUTIONS FOR PROPER USE
Refer to General precautions.
相关PDF资料 |
PDF描述 |
|---|---|
| ES155 | HEAVY DUTY DEGREASER |
| FPSNAP | PRONG SNAP 3/8" SOCKET |
| FSG1M-S | FRONT SOLE GROUNDER ASMBLY W/RES |
| GT-0901A | BUZZER 2.73KHZ 1-3V EXT DRIVE |
| GT-0903A | BUZZER 2.73KHZ 2-4V EXT DRIVE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ER-VWCC5 | 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Ionizer, ER-VW Series, Cable With Connection Length of 5 Meters 制造商:PANASONIC ELECTRIC WORKS - ACSD 功能描述:CABLE WITH CONNECTOR LENGTH 5M 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:CABLE WITH CONNECTOR LENGTH 5M |
| ER-VWCC9 | 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Ionizer, ER-VW Series, Cable With Connection Length Of 9 Meters 制造商:PANASONIC ELECTRIC WORKS - ACSD 功能描述:CABLE WITH CONNECTOR LENGTH 9M |
| ERW01-060 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Model Package Type IGBTs |
| ERW02-060 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Model Package Type IGBTs |
| ERW03-060 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Model Package Type IGBTs |
发布紧急采购，3分钟左右您将得到回复。