- 您现在的位置：买卖IC网 > PDF目录15357 > ESRL680M02R (Cornell Dubilier Electronics (CDE))CAP ALUM 68UF 2V 20% SMD PDF资料下载
参数资料
| 型号： | ESRL680M02R |
| 厂商： | Cornell Dubilier Electronics (CDE) |
| 文件页数： | 6/6页 |
| 文件大小： | 0K |
| 描述： | CAP ALUM 68UF 2V 20% SMD |
| 标准包装： | 3,500 |
| 系列： | ESRL |
| 电容： | 68µF |
| 额定电压： | 2V |
| 容差： | ±20% |
| 寿命@温度： | 105°C 时为 1000 小时 |
| 工作温度： | -55°C ~ 105°C |
| 特点： | 聚合物 |
| 纹波电流： | 1.6A |
| ESR（等效串联电阻）： | 35 毫欧 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 2917（7343 公制） |
| 尺寸/尺寸： | 0.287" L x 0.169" W（7.30mm x 4.30mm） |
| 高度 - 座高（最大）： | 0.043"（1.10mm） |
| 表面贴装占地面积： | 0.287" L x 0.169" W（7.30mm x 4.30mm） |
| 包装： | 带卷 (TR) |
SPA Capacitors
Solid Polymer Aluminum Capacitors
Specifications
Operating Temperature Range;
-55 ° C to +105 ° C, at 100% rated voltage
Surge Voltage;
125% of the rated working Vdc
Capacitance Range;
2.2 μ F to 390 μ F
Capacitance Tolerance;
± 20% at 120 Hz and +20 ° C
DC Leakage Current (DCL);
After a two minute application of the rated
working voltage at +20 ° C:
2V - 4V: I ≤ 0.06CV
6.3V - 16V: I ≤ 0.04CV or 3 μ A
(whichever greater)
Dissipation Factor (DF);
The ratio of the capacitor í s equivalent series
resistance to its reactance at 120Hz and +20 ° C.
ESRL & ESRD (1.8 mm ht.): D.F. is .06 Max.
ESRE & ESRD (2.8 mm ht.): D.F. is .10 Max.
Resistance to Soldering Heat;
Heat the capacitors at 235 ° C in an oven for 200
seconds. The capacitors will meet the following
limits after stabilizing at 20 ° C:
? C = ± 10% of the initial measured value
DF ≤ the initial specified value
DCL ≤ the initial specified value
Vibration;
No abnormal change shall occur to capacitors that
have been soldered (and attached) to a board when
subjected to a vibration of 1.5 mm amplitude that
is varied from 10 Hz to 2000 Hz in 20 min. cycles.
The test duration is 2 hours for each right angle
direction (total 6 hours). Capacitance is monitored
during the last cycle of the test for stablilty.
Moisture Resistance;
After 500 hours storage at +60 ° C and 90 to 95%
R.H. without load, the capacitor will meet the
following limits:
? C = +70%/-20% of the initial
measured value (2.0 Vdc, 2.5 Vdc),
+60%/-20% of the initial
measured value (4.0 Vdc),
+50%/-20% of the initial
measured value (6.3 Vdc),
+40%/-20% of the initial
measured value (all other voltages)
DF ≤ two times the initial specified value
DCL ≤ the initial specified value
Life Test;
Apply rated DC working voltage at 105 ° C for
1000 hours, and then stabilize them to +20 ° C.
Capacitors will meet the following limits:
? C = ± 10% of the initial measured value
DF ≤ the initial specified value
DCL ≤ the initial specified value
Shelf Life Test;
Shelf life is typically 5 to 10 years. Accelerated
test: after 500 hours at 105 ° C, capacitors will meet
the following limits after stabilization at 20 ° C:
? C = ± 10% of the initial measured value
DF ≤ the initial specified value
DCL ≤ the initial specified value
Shear Test;
No damage shall be visible after subjecting a
mounted capacitor to a side force of 5 N for 10
seconds
1605 East Rodney French Blvd.
New Bedford, MA 02744
(508) 996-8564, Fax (508) 996-3830
CORNELL
DUBILIER
1.040
http://www.cornell-dubilier.com
E-mail: cdenb@cornell-dubilier.com
Your Source For Capacitor Solutions
相关PDF资料 |
PDF描述 |
|---|---|
| LTC2901-2IGN#TRPBF | IC MONITOR SUPPLY QUAD 16-SSOP |
| GMC10DRST-S273 | CONN EDGECARD 20POS DIP .100 SLD |
| VI-21K-EW-F4 | CONVERTER MOD DC/DC 40V 100W |
| LTC2901-2IGN#TR | IC MONITOR SUPPLY QUAD 16-SSOP |
| DLFL-0125-0501 | DLFL SATURATION CHOKE 5A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ESRM100ELL101MF05D | 制造商:Nippon Chemi-Con 功能描述:Aluminium Electrolytic Capacitor |
| ESRM100ELL221MH05G | 制造商:Nippon Chemi-Con 功能描述:Aluminium Electrolytic Capacitor |
| ESRM100ELL330MD05D | 制造商:Nippon Chemi-Con 功能描述:Aluminium Electrolytic Capacitor |
| ESRM160ELL100MD05D | 制造商:Nippon Chemi-Con 功能描述:Aluminium Electrolytic Capacitor |
| ESRM160ELL220MD05D | 制造商:Nippon Chemi-Con 功能描述:Aluminium Electrolytic Capacitor |
发布紧急采购，3分钟左右您将得到回复。