参数资料
| 型号： | EVAL-AD5172SDZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 7/16页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR AD5172 |
| 标准包装： | 1 |
| 主要目的： | 数字电位器 |
| 嵌入式： | 否 |
| 已用 IC / 零件： | AD5172 |
| 主要属性： | 2 通道，256 位置 |
| 次要属性： | I²C 接口 |
| 已供物品： | 板，CD |
Evaluation Board User Guide
SOFTWARE OPERATION
The main window of the EVAL-AD5172SDZ software is
divided into the following sections: RDAC1, RDAC2 , and
MANUAL WRITE .
RDAC1 and RDAC2 have the following options:
UG-243
different supply, close the program, change the link, and
rerun the software. The button is disabled if the fuses are
programmed or if a fatal error occurred during the fuse
blowing.
Due to the supply voltage limitations of the SDP board, the
fuses are blown at 5 V. This voltage is lower than the
?
WRITE can be used to update the RDAC registers by
entering a desirable value into the text box and clicking
WRITE . When WRITE is clicked, a write/read operation
?
recommended voltage (5.6 V), and a proper blow is not
guaranteed.
FUSE STATUS shows the fuse status.
?
?
?
is performed, and the value displayed in this section is
updated with the actual RDAC register value. This function
can be used to verify whether the write operation was
completed successfully.
SHUTDOWN connects the wiper to the B terminal and
open circuits the A terminal. When the button is clicked,
the bit toggles automatically.
RESET loads the value stored in the fuses. The button is
disabled if the fuses are not programmed or if a fatal error
occurred during the blowing.
PROGRAM allows you to program the fuses. The A25 link
MANUAL WRITE has the following options:
? SEND DATA —A customized I 2 C data-word can be sent by
manually switching the scroll bars from 0 to 1 or from 1 to
0 as desired and then clicking SEND DATA . The number
of bytes to send can be selected by switching BYTES TO
SEND to 1 or 2.
In addition, the scroll bars are updated on each write
transfer, showing the command sent to the part.
? EXIT closes the program but does not reset the part.
must be connected to 5 V. If the board is operated at a
Rev. 0 | Page 7 of 16
相关PDF资料 |
PDF描述 |
|---|---|
| EVAL-AD5252SDZ | BOARD EVAL FOR AD5252 |
| EVAL-AD5254SDZ | BOARD EVAL FOR AD5254 |
| EVAL-AD5932EBZ | BOARD EVAL FOR AD5932 |
| EVAL-AD74111EBZ | BOARD EVAL FOR AD74111 |
| EVAL-AD7741/42EBZ | BOARD EVAL FOR AD7741/7742 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EVAL-AD5204SDZ | 功能描述:BOARD EVAL FOR AD5204 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:* 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
| EVAL-AD5222SDZ | 功能描述:BOARD EVAL FOR AD5222 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:* 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
| EVAL-AD5228EBZ | 功能描述:BOARD EVAL FOR AD5228 DGTL POT RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
| EVAL-AD5232-10EBZ | 功能描述:BOARD EVALUATION FOR AD5232-10 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
| EVAL-AD5232SDZ | 功能描述:BOARD EVAL FOR AD5232 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信，线路接口单元（LIU） 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板，电源，线缆，CD 其它名称:82EBV2081 |
发布紧急采购，3分钟左右您将得到回复。