- 您现在的位置：买卖IC网 > PDF目录17036 > EVAL-AD7400EDZ (Analog Devices Inc)BOARD EVAL AD7400 PDF资料下载
参数资料
| 型号： | EVAL-AD7400EDZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 6/20页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL AD7400 |
| 标准包装： | 1 |
| 系列： | iCoupler® |
| ADC 的数量： | 1 |
| 位数： | 16 |
| 采样率（每秒）： | 10M |
| 数据接口： | 串行 |
| 输入范围： | ±320 mV |
| 在以下条件下的电源（标准）： | 90mW @ 10MSPS |
| 工作温度： | -40°C ~ 105°C |
| 已用 IC / 零件： | AD7400 |
| 已供物品： | 板 |
AD7400
Data Sheet
Rev. G | Page 14 of 20
DIFFERENTIAL INPUTS
The analog input to the modulator is a switched capacitor
design. The analog signal is converted into charge by highly
linear sampling capacitors. A simplified equivalent circuit
diagram of the analog input is shown in Figure 23. A signal
source driving the analog input must be able to provide the
charge onto the sampling capacitors every half MCLKOUT cycle
and settle to the required accuracy within the next half cycle.
φA
φB
1k
VIN–
φA
φB
1k
VIN+
2pF
φA
MCLKOUT
04718-
027
Figure 23. Analog Input Equivalent Circuit
Because the AD7400 samples the differential voltage across its
analog inputs, low noise performance is attained with an input
circuit that provides low common-mode noise at each input.
The amplifiers used to drive the analog inputs play a critical role in
attaining the high performance available from the AD7400.
When a capacitive load is switched onto the output of an op
amp, the amplitude momentarily drops. The op amp tries to
correct the situation and, in the process, hits its slew rate limit.
This nonlinear response, which can cause excessive ringing, can
lead to distortion. To remedy the situation, a low-pass RC filter
can be connected between the amplifier and the input to the
AD7400. The external capacitor at each input aids in supplying
the current spikes created during the sampling process, and the
resistor isolates the op amp from the transient nature of the load.
The recommended circuit configuration for driving the differential
inputs to achieve best performance is shown in Figure 24. A
capacitor between the two input pins sources or sinks charge
to allow most of the charge that is needed by one input to be
effectively supplied by the other input. The series resistor again
isolates any op amp from the current spikes created during the
sampling process. Recommended values for the resistors and
capacitor are 22 and 47 pF, respectively.
R
VIN–
R
VIN+
C
AD7400
04718-
028
Figure 24. Differential Input RC Network
相关PDF资料 |
PDF描述 |
|---|---|
| VI-21N-EY | CONVERTER MOD DC/DC 18.5V 50W |
| EVAL-AD7400AEDZ | BOARD EVAL AD7400A |
| EBC20DREN-S734 | CONN EDGECARD 40POS .100 EYELET |
| EVAL-AD7262EDZ | BOARD EVAL CONTROL AD7262 |
| VE-212-EY | CONVERTER MOD DC/DC 15V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EVAL-AD7401AEDZ | 功能描述:BOARD EVAL FOR AD7401 RoHS:是 类别:编程器，开发系统 >> 评估板 - 模数转换器 (ADC) 系列:iCoupler® 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- ADC 的数量:1 位数:12 采样率（每秒）:94.4k 数据接口:USB 输入范围:±VREF/2 在以下条件下的电源（标准）:- 工作温度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，软件 |
| EVAL-AD7401EB | 制造商:AD 制造商全称:Analog Devices 功能描述:Isolated Sigma-Delta Modulator |
| EVAL-AD7401EDZ | 功能描述:BOARD EVALUATION FOR AD7401 RoHS:是 类别:编程器，开发系统 >> 评估板 - 模数转换器 (ADC) 系列:iCoupler® 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- ADC 的数量:1 位数:12 采样率（每秒）:94.4k 数据接口:USB 输入范围:±VREF/2 在以下条件下的电源（标准）:- 工作温度:-40°C ~ 85°C 已用 IC / 零件:MAX11645 已供物品:板，软件 |
| EVAL-AD74111EBZ | 功能描述:BOARD EVAL FOR AD74111 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源 |
| EVAL-AD74122EB-U1 | 制造商:Analog Devices 功能描述:- Bulk |
发布紧急采购，3分钟左右您将得到回复。