参数资料
型号: EVAL-ADCMP567BCPZ
厂商: Analog Devices Inc
文件页数: 2/17页
文件大小: 0K
描述: BOARD EVALUATION ADCMP567BCP
标准包装: 1
主要目的: 接口,比较器
已用 IC / 零件: ADCMP567
已供物品:
相关产品: ADCMP567BCPZ-ND - IC COMP DUAL ULTRA-FAST 32LFCSP
ADCMP567
Rev. 0 | Page 10 of 16
as the variation in propagation delay as the input overdrive
conditions are changed (Figure 4). For the ADCMP567,
overdrive dispersion is typically 35 ps as the overdrive is
changed from 100 mV to 1 V. This specification applies for
both positive and negative overdrive since the ADCMP567 has
equal delays for positive and negative going inputs.
The 35 ps propagation delay overdrive dispersion of the
ADCMP567 offers considerable improvement of the 100 ps
dispersion of other similar series comparators.
Q OUTPUT
INPUT VOLTAGE
1.5V OVERDRIVE
20mV OVERDRIVE
DISPERSION
VREF ± VOS
03633-0-004
Figure 4. Propagation Delay Dispersion
COMPARATOR HYSTERESIS
The addition of hysteresis to a comparator is often useful in a
noisy environment or where it is not desirable for the com-
parator to toggle between states when the input signal is at the
switching threshold. The transfer function for a comparator
with hysteresis is shown in Figure 5. If the input voltage
approaches the threshold from the negative direction, the
comparator will switch from a 0 to a 1 when the input crosses
+VH/2. The new switching threshold becomes VH/2. The
comparator will remain in a 1 state until the threshold VH/2 is
crossed coming from the positive direction. In this manner,
noise centered on 0 V input will not cause the comparator to
switch states unless it exceeds the region bounded by ±VH/2.
Positive feedback from the output to the input is often used to
produce hysteresis in a comparator (Figure 9). The major
problem with this approach is that the amount of hysteresis
varies with the output logic levels, resulting in a hysteresis that
is not symmetrical around zero.
Another method to implement hysteresis is generated by
introducing a differential voltage between LATCH ENABLE
and LATCH ENABLE. inputs (Figure 10). Hysteresis generated
in this manner is independent of output swing and is symmetri-
cal around zero. The variation of hysteresis with input voltage is
shown in Figure 6.
OUTPUT
INPUT
0
1
0V
–VH
2
+VH
2
03633-0-005
Figure 5. Comparator Hysteresis Transfer Function
LATCH = LE – LEB (mV)
H
YSTER
ESIS
(
m
V)
–25
0
10
20
30
40
50
60
–15
–20
–10
–5
0
5
03632-0-006
Figure 6. Comparator Hysteresis Transfer Function
Using Latch Enable Input
MINIMUM INPUT SLEW RATE REQUIREMENT
As for all high speed comparators, a minimum slew rate must
be met to ensure that the device does not oscillate when the
input crosses the threshold. This oscillation is due in part to the
high input bandwidth of the comparator and the parasitics of
the package. Analog Devices recommends a slew rate of 5 V/s
or faster to ensure a clean output transition. If slew rates less
than 5 V/s are used, then hysteresis should be added to reduce
the oscillation.
相关PDF资料
PDF描述
SPD125R-184M INDUCTOR PWR SHIELDED 180UH SMD
EVAL-ADCMP580BCPZ BOARD EVAL FOR ADCMP580BCP
V24B48E150BF2 CONVERTER MOD DC/DC 48V 150W
GCM18DTKD CONN EDGECARD 36POS DIP .156 SLD
ECO-S2DA391BA CAP ALUM 390UF 200V 20% SNAP
相关代理商/技术参数
参数描述
EVAL-ADCMP572BCP 制造商:Analog Devices 功能描述:EVAL BOARD-SINGLE SUPPLY, CML ON XFCB3.0 - Bulk
EVAL-ADCMP572BCPZ 功能描述:BOARD EVALUATION ADCMP572BCP RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信,线路接口单元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板,电源,线缆,CD 其它名称:82EBV2081
EVAL-ADCMP573BCP 制造商:Analog Devices 功能描述:EVAL BOARDSINGLE SUPPLY, PECL ON XFCB3.0 - Bulk
EVAL-ADCMP573BCPZ 功能描述:BOARD EVALUATION ADCMP573BCP RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信,线路接口单元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板,电源,线缆,CD 其它名称:82EBV2081
EVAL-ADCMP580BCP 制造商:Analog Devices 功能描述:EVAL BOARD-DUAL SUPPLY, CML ON XFCB3.0 - Bulk