- 您现在的位置：买卖IC网 > Datasheet目录977 > EVAL.BH1603FVC (Rohm Semiconductor)BOARD EVAL FOR BH1603FVC Datasheet资料下载
参数资料
| 型号： | EVAL.BH1603FVC |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 4/11页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR BH1603FVC |
| 特色产品： | Ambient Light Sensor ICs |
| 标准包装： | 1 |
| 传感器类型： | 环境光 |
| 接口： | 逻辑 |
| 灵敏度： | 560nm |
| 电源电压： | 2.4 V ~ 5.5 V |
| 嵌入式： | 否 |
| 已供物品： | 板，CD |
| 已用 IC / 零件： | BH1603 |
BH1603FVC
● External parts Setting
1) Gain setting of BH1603FVC
Please select the best gain controlled by 5 and 6pin based on the required illuminance range.
The reference is as follows.
Technical Note
Illuminance detection range [lx]
~1,000
~10,000
~100,000
Gain Mode
H-Gain Mode
M-Gain Mode
L-Gain Mode
Viout= 0.6 x 10 x Ev x R1
R1 = Viout/(0.6 x 10 x Ev)
= 2 /(0.6 x 10 x 500) = 6667[ ? ]
Viout= 0.06 x 10 x Ev x R1
Viout= 0.006 x 10 x Ev x R1
This device will be mounted under the optical window in actual designing. Therefore, there is a possibility that the
illuminace to ALS( Ambient Light Sensor) will be less than the illuminance on the final product surface.
Please consider the attenuation of light through the optical window.
Please set output resistance value( R1) within the range of 1 k ? ~1M ? which needs to be smaller than the input
impedance of the next circuit.
2) Approximate formula of IOUT output voltage in each Gain Mode
(1) H-Gain mode
The output voltage is calculated as below.
-6
Viout is IOUT output voltage [V]. Ev is an illuminance of the ALS surface [lx].
R1 is IOUT output resistor[ ? ].
(For example) In case you want to convert the illuminance value up to 500 lx by ADC.
If the maximum voltage of ADC input is 2V, output resistor value will be as below.
-6
-6
? 6.8[k ? ]
(2) M-Gain mode
The output voltage is calculated as follows.
-6
(3) L-Gain mode
The output voltage is calculated as follows.
-6
3) C1
(1) To reject the flicker light..
In case IOUT output is R1 only and an ALS receives the artificial lights such as fluorescent lamps and incandescent
lamps synchronized with 50/60 Hz of AC power supplies, the output current has a ripple. If you want to reject this ripple,
please add C1 to R1 in parallel. Please set it to C1 x R1 = about 0.1 as a time constant.
(2) To control backlight smoothly by using illuminance value.
C1 is effective to control backlight smoothly for a rapid changing of the illuminance. In this case, please set it to C1 x R1
= about 1 ~ 10 as a time constant. It is not necessary if you average illuminance value with software to change backlight
smoothly.
Please note that the rise time becomes slow at power-on and recovery from shutdown mode to operation mode.
www.rohm.com
? 2012 ROHM Co., Ltd. All rights reserved.
4/8
2012.02 - Rev.D
相关PDF资料 |
PDF描述 |
|---|---|
| EVAL.BH1620FVC | BOARD EVAL FOR BH1620FVC |
| EVAL.BH1721FVC | BOARD EVAL FOR BH1721FVC |
| EVAL-KXD94-2802 | BOARD EVALUATION FOR KXD94-2082 |
| EVAL-KXR94-2283 | BOARD EVALUATION FOR KXR94-2283 |
| EVAL-KXR94-2353 | BOARD EVALUATION FOR KXR94-2353 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EVALBOARD | 制造商:STMicroelectronics 功能描述:EVALBOARD - Bulk |
| EVAL-BT | 功能描述:蓝牙/802.15.1 开发工具 Bluetooth Eval Board RoHS:否 制造商:Panasonic Electronic Components 产品:Bluetooth Evaluation Kit 工具用于评估:PAN1721 频率:2.4 GHz 接口类型:I2C 工作电源电压:2 V to 3.6 V |
| EVAL-CED1Z | 功能描述:BOARD EVAL CONVERTER RoHS:是 类别:编程器，开发系统 >> 配件 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program RoHS指令信息:IButton RoHS Compliance Plan 标准包装:1 系列:- 附件类型:USB 至 1-Wire? RJ11 适配器 适用于相关产品:1-Wire? 设备 产品目录页面:1429 (CN2011-ZH PDF) |
| EVAL-CED1Z | 制造商:Analog Devices 功能描述:EVALUATION BOARD ((NS)) |
| EVAL-CED1Z3 | 制造商:AD 制造商全称:Analog Devices 功能描述:18-Bit, 2.5 LSB INL, 800 kSPS SAR ADC |
发布紧急采购，3分钟左右您将得到回复。