参数资料
型号: F4804A-G
厂商: POWER-ONE INC
元件分类: 数据传输滤波器
英文描述: DATA LINE FILTER MODULE
文件页数: 2/41页
文件大小: 1387K
代理商: F4804A-G
MCD10059 Rev. 1.0
Page 10 of 41
www.power-one.com
F & FC Series DC-DC Converter Input Filters
F2410 & F4810, 0-45V/0-80V, 10 Amps, SMT Mount
The F4810 and F2410 filters contain input and output
capacitors, plus differential and common mode
inductors. Shown in Fig. 1, the schematic diagrams
of both filters are similar, the only difference are
changes in C1, C2 capacitor values. The separate
differential inductor, L2, allows a 50 differential
attenuation of 60 dB across the stated frequency
range, a value substantially higher in comparison
with other available off-the-shelf filters (typically
25-30 dB).
The F4810 can be used in 24 V or 48 V systems
without any limitations; however, in 24 V systems the
F2410 differential attenuation is better. At low
frequencies around 100-200 kHz the difference is
20dB, but at high frequencies the plots are close to
identical.
Absolute maximum voltage and maximum operating
voltage in Electrical Specifications Table are for the
filter itself; check maximum rating for corresponding
dc-dc converters. The filter will not be damaged by
reversed input voltage, or by applying voltage to the
output pins.
C2
L1-1
V
OUT+
V
OUT-
L1-2
L2
C1
4.2
μH
V
IN-
V
IN+
R1
49.9
4
μF
3
μF
Fig. 1: Schematic diagram for F4810, F2410. The Capacitor
values shown are for F4810; for F2410 C1=10 μF; C2=13 μF.
Fig. 2: F4810 - Differential mode attenuation, 0.2-100 MHz.
Source and load resistances are 50 . Vertical scale: 10
dB/div, with zero level marked by arrow. No load, 25 C.
Fig. 3: F2410 - Differential mode attenuation, 0.2-100 MHz.
Source and load resistance 50 . Vertical scale: 10 dB/div,
with zero level marked by arrow. No load, 25 C.
Differential attenuation plots for the F4810 and
F2410 filters in the extended frequency range of
20 kHz-100 MHz are shown in Fig. 2 and Fig. 3,
respectively, and can be seen to be flat (around
55-60 dB) from 0.35 MHz to 40 MHz.
Fig. 4 shows Common mode attenuation with 50
source and load. The attenuation is the same for
both filters, and depends on the value of external
Y-capacitors, connected between input pins and
frame or a reference ground.
Fig. 4: F4810/F2410 - Common Mode attenuation, 0.2-100
MHz. Source and load resistances are 50 . Two 0.1uF Y-
相关PDF资料
PDF描述
F4804A-RG DATA LINE FILTER MODULE
F4804A-R DATA LINE FILTER MODULE
F4804A-SG DATA LINE FILTER MODULE
F4804A-SRG DATA LINE FILTER MODULE
F4804A-SR DATA LINE FILTER MODULE
相关代理商/技术参数
参数描述
F4804A-G IS 制造商:Power-One 功能描述:Electromechanical Filter Filter Module 5uH 4ADC
F4804A-R 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
F4804A-RG 制造商:Power-One 功能描述:Electromechanical Filter 50Ohm 5uH 4ADC 制造商:Power-One 功能描述:EM FLTR 50OHM - Tape and Reel 制造商:Power-One 功能描述:F4804A Series Single Output 80 V Surface Mount DC/DC Converter Power Supply
F4804A-R-G 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
F4804-R 制造商:Power-One 功能描述:EM FLTR 50OHM - Tape and Reel