Visit our website at: www .panduit.com/ncg
NETWORK CONNECTIVITY GROUP
SPEC SHEET
specifications
technical information
applications
SC Fiber Optic Connectors shall be compliant
with TIA FOCIS-3. SC connectors shall
contain a factory terminated pre-polished
multimode fiber connector, requiring no field
polishing and no adhesive. The fibers shall
terminate in 2.5mm ferrules and have typical
insertion loss of 0.35dB per connector.
OPTI-CRIMP SC Fiber Optic Connector
The
OPTI-CRIMP SC Fiber Optic Connector
improves an industry standard design. The
factory polishing and crimp termination
speeds installation and reduces the
installation cost for the connector. SC Fiber
Optic Connectors are widely used in fiber
optic backbone and horizontal applications for
high-speed data transmissions. The pre-
polished ferrule insures reliability in essential
data networks by reducing the possibility of
installer error.
key features and ...benefits
Pre-polished fiber stub
Eliminates polishing steps, speeding installation
Mechanical crimp
Consistently provides higher than industry standard cable
cable retention
retention; requires no adhesive, speeding installation
Proven 2.5mm
Uses standard termination tools and procedures and provides
ceramic ferrules
strength and reliability
Robust design
Protects fibers from mechanical and environmental stress
Non-optical disconnect
Network reliability; maintains data transmission under
tensile loads (jacketed cable only)
FOCIS-3 compliant
Ensures intermatability with all FOCIS-3 compliant components
Exceeds TIA/EIA-568-B.3
Network reliability assured as defined by TIA
Color-coded inner
Immediate visual recognition or identification of inner housing;
housing
62.5/125m (gray) and 50/125m (orange)
Fiber compatibility:
62.5/125m and 50/125m multimode
Fiber cable type:
Tight-buffered cable only (3.0mm jacketed or 900m)
Ferrule type:
Zirconia ceramic with a pre-polished fiber stub
Insertion loss:
0.3dB typical (62.5/125m), 0.4dB typical (50/125m)
Return loss:
Greater than 25dB
Pre-polished Multimode
900m Tight-Buffered Fiber
or 3mm Jacketed Cable
62.5/125m
black boot:
FSCMMBL
62.5/125m
red boot:
FSCMMRD
50/125m
black boot:
FSCMM50BL
50/125m
red boot:
FSCMM50RD
Multimode Patch Cords
and Pigtails
OPTI-PLUG duplex
connector to SC:
F6D6P-3M
Simplex 900m
buffered SC pigtails: F6B3-NM
Simplex SC to SC:
F6S3-3M
Duplex SC to SC:
F6D3-3M
Duplex ST to SC:
F6D2-3M
Duplex SC to FC:
F6D3-4M
Pre-polished Crimp
Termination Tooling
Termination kit:
FJMKIT
Please contact factory for additional
patch cord configurations and custom lengths.
Available in standard lengths of 1, 2, 3 and 10
meters
Reduces installation
time over standard SC
field polish/adhesive
connectors by 50%.
installer tip