- 您现在的位置：买卖IC网 > PDF目录20403 > F911A157MNC (Nichicon)CAP TANT 150UF 10V 20% 2917 PDF资料下载
参数资料
| 型号： | F911A157MNC |
| 厂商： | Nichicon |
| 文件页数： | 1/1页 |
| 文件大小： | 0K |
| 描述： | CAP TANT 150UF 10V 20% 2917 |
| 产品培训模块： | Nichicon Tantalum Cap Overview |
| 产品目录绘图： | F9(1,2,3,7) Series Bottom F9(1,2,3,7) Series Side |
| 标准包装： | 1 |
| 系列： | F91 |
| 电容： | 150µF |
| 电压 - 额定： | 10V |
| 容差： | ±20% |
| ESR（等效串联电阻）： | 100 毫欧 |
| 类型： | 模制 |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 2917（7343 公制） |
| 尺寸/尺寸： | 0.287" L x 0.169" W（7.30mm x 4.30mm） |
| 高度 - 座高（最大）： | 0.118"（3.00mm） |
| 制造商尺寸代码： | N |
| 特点： | 通用 |
| 包装： | 标准包装 |
| 产品目录页面： | 2006 (CN2011-ZH PDF) |
| 其它名称： | 493-2313-6 |
SOLID TANTALUM ELECTROLYTIC CAPACITORS
F91
LOW ESR
Resin-molded Chip
Compliant to the RoHS directive (2002/95/EC).
Specifications
Item
Category
Temperature Range
Capacitance Tolerance
Dissipation Factor (120Hz)
ESR (100kHz)
Leakage Current
Capacitance Change
by Temperature
Performance Characteristics
--55 to +125 ? C (Rated temperature : + 85 ? C )
± 20%, ±10% (at 120Hz)
Refer to the table below.
Refer to the table below.
? After 1 minute's application of rated voltage, leakage current
at 20 ? C is not more than 0.01CV or 0.5μA, whichever is greater.
? After 1 minute's application of rated voltage, leakage current
at 85 ? C is not more than 0.1CV or 5μA, whichever is greater.
? After 1 minute's application of derated voltage, leakage current
at 125 ? C is not more than 0.125CV or 6.3μA, whichever is greater.
.
+15% Max. (at +125 ? C )
+10% Max. (at +85 ? C )
--10% Max. (at --55 ? C )
Type numbering system (Example : 10V 100μF)
Damp Heat
(Steady State)
At 40 ? C 90 to 95% R.H. 500 hours (No voltage applied)
Capacitance Change Within ±10% of the initial value
Dissipation Factor......Initial specified value or less
1
2
3
4
5
6
7
8
9
10
11
Leakage Current........Initial specified value or less
F 9 1 1 A 1 0 7 M C
Case code
Capacitance tolerance
Rated capacitance
Rated voltage
Temperature Cycles
--55 ? C / +125 ? C 30 minutes each 5 cycles
Capacitance Change Within ±5% of the initial value
Dissipation Factor......Initial specified value or less
Leakage Current........Initial specified value or less
10 seconds reflow at 260 ? C,
Drawing
C ? N Case
Series
Resistance
to Soldering Heat
5 seconds immersion at 260 ? C
Capacitance Change Within ±5% of the initial value
Dissipation Factor......Initial specified value or less
Leakage Current........Initial specified value or less
After application of surge in series with a 33 ? resistor at the rate of 30
seconds ON, 30 seconds OFF, for 1000 sucessive test cycles at 85 ? C,
L
H
W 1
Surge ?
capacitors shall meet the characteristic requirements table below.
Capacitance Change .... Within ±5% of the initial value
Dissipation Factor ........ Initial specified value or less
Leakage Current .......... Initial specified value or less
After 2000 hours' application of rated voltage in series with a 3 ? resistor
at 85 ? C , or derated voltage in series with a 3 ? resistor at 125 ? C ,
W 2
Endurance ?
capacitors shall meet the characteristics requirements table below.
Capacitance Change ...... Within ±10 % of the initial value
S
S
Dissipation Factor .......... Initial specified value or less
Leakage Current ............ Initial specified value or less
Dimensions
Case Code L
C 6.0 ± 0.2
N 7.3 ± 0.2
W 1
3.2 ± 0.2
4.3 ± 0.2
W 2
2.2 ± 0.1
2.4 ± 0.1
H
2.5 ± 0.2
2.8 ± 0.2
(mm)
S
1.3 ± 0.2
1.3 ± 0.2
Shear Test
After applying the pressure load of 5N for 10±1 seconds
horizontally to the center of capacitor side body which has no
electrode and has been soldered
beforehand on a substrate, there shall
be found neither exfoliation nor its sign
at the terminal electrode.
Keeping a capacitor surface-
mounted on a substrate upside down
Marking
and supporting the substrate at both
of the opposite bottom points 45mm
C Case
N Case
Terminal Strength
apart from the center of capacitor,
the pressure strength is applied with
a specified jig at the center of
substrate so that the substrate may bend by 1mm as illustrated.
Then, there shall be found no remarkable abnormality on the
capacitor terminals.
Rated voltage (V)
Rated Capacitance ( μ F)
Rated voltage (V)
Standard Ratings
Rated Volt
Rated
Capacitance
(μF)
150
Case
code
C
Part Number
F910G157MCC
Leakage
Current
(μA)
6.0
Disspation
Factor
(% @120Hz)
12
ESR
(m ? @100kHz)
250
Cap.
(μF)
Code
V
4
0G
6.3
0J
10
1A
4V
220
330
C
N
F910G227MCC
F910G337MNC
8.8
13.2
12
10
250
100
0 68
686
C
470
N
F910G477MNC
18.8
16
100
100
107
C
C
680
N
F910G687MNC
27.2
18
100
150
157
C
C
N
100
C
F910J107MCC
6.3
8
250
220
330
470
227
337
477
C
N
N
C ? N
N
N
N
N
6.3V
150
220
220
330
C
C
N
N
F910J157MCC
F910J227MCC
F910J227MNC
F910J337MNC
9.5
13.9
13.9
20.8
12
14
10
14
250
250
100
100
680
687
N
470
N
F910J477MNC
29.6
16
100
68
100
C
C
F911A686MCC
F911A107MCC
6.8
10.0
8
10
300
250
10V
150
220
330
N
N
N
F911A157MNC
F911A227MNC
F911A337MNC
15.0
22.0
33.0
10
12
18
100
100
100
In case of capacitance tolerance
system.
± 10% type, K will be put at 9th digit of type numbering
CAT.8100B
相关PDF资料 |
PDF描述 |
|---|---|
| IR2108S | IC DRIVER HALF BRIDGE 8SOIC |
| R0.5Z-0515/H-R | CONV DC/DC 0.5W 05VIN 15VOUT |
| T95C106K025LSSL | CAP TANT 10UF 25V 10% 2812 |
| VI-23P-CX-S | CONVERTER MOD DC/DC 13.8V 75W |
| IR21084S | IC DRIVER HALF BRIDGE 14SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| F911A227KNC | 功能描述:钽质电容器-固体SMD 220uF 10V 10% RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
| F911A227MNC | 功能描述:钽质电容器-固体SMD 10volts 220uF 7.3x4.3 RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
| F911A337KNC | 功能描述:钽质电容器-固体SMD 330uF 10V 10% RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
| F911A337MNC | 功能描述:钽质电容器-固体SMD 10volts 330uF 7.3x4.3 RoHS:否 制造商:AVX 电容:100 uF 电压额定值:20 V ESR: 容差:10 % 外壳代码 - in:2917 外壳代码 - mm:7343 高度:4.1 mm 制造商库存号:E Case 工作温度范围:- 55 C to + 125 C 系列:TBM 产品:Tantalum Solid Low ESR Commercial Grade 封装:Bulk |
| F911A476MBA | 功能描述:47μF Molded Tantalum Capacitors 10V 1411 (3528 Metric) 500 mOhm 0.138" L x 0.110" W (3.50mm x 2.80mm) 制造商:avx corporation 系列:F91 包装:剪切带（CT） 零件状态:有效 电容:47μF 容差:±20% 电压 - 额定:10V ESR（等效串联电阻）:500 毫欧 类型:模制 工作温度:-55°C ~ 125°C 安装类型:表面贴装 封装/外壳:1411（3528 公制） 大小/尺寸:0.138" 长 x 0.110" 宽（3.50mm x 2.80mm） 高度 - 安装（最大值）:0.083"（2.10mm） 引线间距:- 制造商尺寸代码:B 特性:通用 不同温度时的使用寿命:- 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。