- 您现在的位置：买卖IC网 > PDF目录64897 > FBMJ4516HL230NT (TAIYO YUDEN CO LTD) 1 FUNCTIONS, 2 A, FERRITE CHIP PDF资料下载
参数资料
| 型号： | FBMJ4516HL230NT |
| 厂商： | TAIYO YUDEN CO LTD |
| 元件分类： | 数据传输滤波器 |
| 英文描述： | 1 FUNCTIONS, 2 A, FERRITE CHIP |
| 封装： | EIA STD PACKAGE SIZE 1806 |
| 文件页数： | 7/9页 |
| 文件大小： | 1133K |
| 代理商： | FBMJ4516HL230NT |
FERRITE
PRODUCTS
309
5
RELIABILITY DATA
*Note: K5 to J40C in taped packaging
Measuring equipment: Impedance analyzer (HP4291A) or its equivalent
Measuring frequency: 100M1 MHZ
Four-terminal method
Measuring equipment: Milliohm High-Tester 3226(Hioki Denki) or its equivalent
According to JIS C 0040.
Vibration type: A
Directions: 2 hrs each in X,Y, and Z directions
Total: 6 hrs
Frequency range: 10 to 55 to 10Hz(/min.)
Amplitude: 1.5 mm(shall not exceed acceleration 196m/s2)
Mounting method: Soldering onto PC board
Solder temperature: 230M5C
Duration: 4M1 sec.
Preconditioning: Immersion into flux.
Immersion and Removal speed: 25mm/sec.
Preheating: 150C for 3 min.
Solder temperature: 260M5C
Duration: 10M0.5sec
Preconditioning: Immersion into flux.
Immersion and Removal speed: 25 mm/sec.
Recovery: 2 to 3 hrs of recovery under the standard condition after the test.
According to JIS C 0025.
Conditions for 1 cycle
Step
Temperature(C)
Duration(min.)
1
K
40M3C
30M3
2
Room Temperature
Within 3
3
K
85M2C
30M3
4
Room Temperature
Within 3
Number of cycles: 100
Mounting method: Soldering onto PC board
Recovery: 2 to 3 hrs of recovery under the standard condition after the removal
from test chamber.
Temperature: 40M2C
Humidity: 90 to 95%RH
Duration: 500
hrs
Mounting method: Soldering onto PC board
Recovery: 2 to 3 hrs of recovery under the standard condition after the removal
from test chamber.
Temperature : 40M2C
Humidity : 90 to 95%RH
Applied current : Rated current
Duration : 500
hrs
Mounting method : Soldering onto PC board
Recovery : 2 to 3hrs of recovery under the standard condition after the removal
from test chamber.
Temperature: 85M2C
Duration: 500
hrs
Applied current: Rated current
Mounting method: Soldering onto PC board
Recovery: 2 to 3 hrs of recovery under the standard condition after the removal
from test chamber.
Warp: 2mm
Testing board: Glass epoxy-resin substrate
Thickness: 0.8mm
Applied force: 5N
Duration: 10 sec.
1/1
Item
Specified Value
Test Methods and Remarks
RECTANGULAR FERRITE CHIP BEADSfHIGH CURRENTgFB series M type
K
40 ~ J85C
K
40 ~ J85C
Within the specified tolerance
Within the specified range
Appearance: No significant abnormality
Impedance change: Within M30% of the initial value
75% or more of immersed surface of terminal electrode shall be covered with
fresh solder.
Appearance: No significant abnormality
Impedance change: Within M30% of the initial value
Appearance: No significant abnormality
Impedance change: Within
% of the initial value
Appearances: No significant abnormality
Impedance change: Within M30% of the initial value
Appearance : No significant abnormality
Impedance change : Within M30% of the initial value
Appearance: No significant abnormality
Impedance change: Within M30% of the initial value
No mechanical damage.
No separation or indication of separation of electrode.
Note on standard condition: "standard condition" referred to herein is defined as follows 5 to 35C of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results: In order to provide correlation data, the test shall be conducted under condition of 20M2C of temperature, 60 to 70% relative humidity
and 86 to 106kPa of air pressure.
Unless otherwise specified, all the tests are conducted under the "standard condition."
1.Operating Temperature Range
2.Storage Temperature Range
3.Impedance
4. DC Resistance
5.Rated Current
6.Vibration
7. Solderability
8.Resistance to Solder Heat
9.Thermal Shock
10.Humidity (steady state)
11.Loading under Damp Heat
12.High Temperature Loading
Test
13.Resistance to Flexure of
Substrate
14.Adhesion of Electrode
J
50
K
10
J
24
K
0
J
24
K
0
J
24
K
0
相关PDF资料 |
PDF描述 |
|---|---|
| FCFBMJ3216HL160NT | 1 FUNCTIONS, 2 A, FERRITE CHIP |
| FCFBMJ4516HL230NT | 1 FUNCTIONS, 2 A, FERRITE CHIP |
| FBS-30 | 30 MHz, BAND PASS FILTER |
| FCP600-48G | AC-DC REG PWR SUPPLY MODULE |
| FCP600-48 | AC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FBMJ4516HL230NTV | 功能描述:23 Ohm Impedance Ferrite Bead 1806 (4516 Metric) Surface Mount Power Line 3.5A 1 Lines 14 mOhm Max DCR -40°C ~ 125°C 制造商:taiyo yuden 系列:FB 包装:剪切带（CT） 零件状态:有效 滤波器类型:电源线 线路数:1 不同频率时的阻抗:23 欧姆 @ 100MHz 额定电流（最大）:3.5A 直流电阻（DCR）（最大）:14 毫欧 等级:AEC-Q200 工作温度:-40°C ~ 125°C 封装/外壳:1806（4516 公制） 安装类型:表面贴装 高度（最大值）:0.051"（1.30mm） 大小/尺寸:0.177" 长 x 0.063" 宽（4.50mm x 1.60mm） 标准包装:1 |
| FBMJ4516HM560K | 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:Surface Mount Ferrite Products |
| FBMJ4516HM560NT | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 FER BD HI CUR CHIP 1806 56OHMS 30% RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
| FBMJ4516HM560NTV | 功能描述:56 Ohm Impedance Ferrite Bead 1806 (4516 Metric) Surface Mount Power Line 6A 1 Lines 7 mOhm Max DCR -40°C ~ 125°C 制造商:taiyo yuden 系列:FB 包装:剪切带（CT） 零件状态:有效 滤波器类型:电源线 线路数:1 不同频率时的阻抗:56 欧姆 @ 100MHz 额定电流（最大）:6A 直流电阻（DCR）（最大）:7 毫欧 等级:AEC-Q200 工作温度:-40°C ~ 125°C 封装/外壳:1806（4516 公制） 安装类型:表面贴装 高度（最大值）:0.051"（1.30mm） 大小/尺寸:0.177" 长 x 0.063" 宽（4.50mm x 1.60mm） 标准包装:1 |
| FBMJ4516HM900K | 制造商:KEMET 制造商全称:Kemet Corporation 功能描述:Surface Mount Ferrite Products |
发布紧急采购，3分钟左右您将得到回复。