- 您现在的位置：买卖IC网 > PDF目录68994 > FC250F1 (LINEAGE POWER LLC) 1-OUTPUT 165 W DC-DC REG PWR SUPPLY MODULE PDF资料下载
参数资料
| 型号： | FC250F1 |
| 厂商： | LINEAGE POWER LLC |
| 元件分类： | 电源模块 |
| 英文描述： | 1-OUTPUT 165 W DC-DC REG PWR SUPPLY MODULE |
| 封装： | MODULE-20 |
| 文件页数： | 5/20页 |
| 文件大小： | 1173K |
| 代理商： | FC250F1 |
Lineage Power
13
Data Sheet
April 2008
18 Vdc to 36 Vdc Input, 3.3 Vdc Output; 165 W
FC250F1 Power Module: dc-dc Converter;
Thermal Considerations (continued)
Introduction (continued)
The temperature at this location should not exceed
100 °C. The maximum case temperature can be limited
to a lower value for extremely high reliability. The output
power of the module should not exceed the rated power
for the module as listed in the Ordering Information table.
For additional information about these modules, refer to
the
Thermal Management for FC- and FW-Series 250
W—300 W Board-Mounted Power Modules Technical
Note (TN96-009EPS).
Heat Transfer Without Heat Sinks
Derating curves for forced-air cooling without a heat
sink are shown in Figures 19 and 20. These curves can
set of operating conditions. For example, if the unit with
airow along its length dissipates 20 W of heat, the
correct airow in a 40 °C environment is 1.0 m/s
(200 ft./min.).
8-1315 (C)
Figure 19. Convection Power Derating with No Heat
Sink; Airow Along Width; Transverse
Orientation
8-1314 (C)
Figure 20. Convection Power Derating with No Heat
Sink; Airow Along Length;
Longitudinal Orientation
Heat Transfer with Heat Sinks
The power modules have through-threaded, M3 x 0.5
mounting holes, which enable heat sinks or cold plates
to be attached to the module. The mounting torque
must not exceed 0.56 N-m (5 in.-lb.). For a screw
attachment from the pin side, the recommended hole
size on the customer’s PWB around the mounting
holes is 0.130 ± 0.005 inches. If a larger hole is used,
the mounting torque from the pin side must not exceed
0.25 N-m (2.2 in.-lb.).
Thermal derating with heat sinks is expressed by using
the overall thermal resistance of the module. Total mod-
ule thermal resistance (
θca) is dened as the maximum
case temperature rise (
TC, max) divided by the module
power dissipation (PD):
The location to measure case temperature (TC) is
shown in Figure 18. Case-to-ambient thermal resis-
tance vs. airow for various heat sink congurations is
shown in Figures 21 and 22. These curves were
obtained by experimental testing of heat sinks, which
are offered in the product catalog.
0
10
203040
100
0
40
60
70
LOCAL AMBIENT TEMPERATURE, TA (
°C)
POWER
DISSIPATION,
P
D
(W)
30
20
10
90
80
70
60
50
4.0 m/s (800 ft./min.)
3.5 m/s (700 ft./min.)
3.0 m/s (600 ft./min.)
2.5 m/s (500 ft./min.)
2.0 m/s (400 ft./min.)
1.5 m/s (300 ft./min.)
1.0 m/s (200 ft./min.)
0.5 m/s (100 ft./min.)
0.1 m/s (20 ft./min.) NAT. CONV.
0
10
203040
100
0
40
60
70
LOCAL AMBIENT TEMPERATURE, TA (
°C)
POWER
DISSIPATION,
P
D
(W)
30
20
10
90
80
70
60
50
4.0 m/s (800 ft./min.)
3.5 m/s (700 ft./min.)
3.0 m/s (600 ft./min.)
2.5 m/s (500 ft./min.)
2.0 m/s (400 ft./min.)
1.5 m/s (300 ft./min.)
1.0 m/s (200 ft./min.)
0.5 m/s (100 ft./min.)
50
0.1 m/s (20 ft./min.) NAT. CONV.
θca
TC max
,
PD
---------------------
TC
TA
–
()
PD
------------------------
==
相关PDF资料 |
PDF描述 |
|---|---|
| FC250R1 | 1-OUTPUT 250 W DC-DC REG PWR SUPPLY MODULE |
| FC250R1 | 1-OUTPUT 252 W DC-DC REG PWR SUPPLY MODULE |
| FC250S6R51 | 1-OUTPUT 250.25 W DC-DC REG PWR SUPPLY MODULE |
| FC400R1-29 | DC-DC REG PWR SUPPLY MODULE |
| FC400R61-29 | DC-DC REG PWR SUPPLY MODULE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FC250H1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:DC-to-DC Voltage Converter |
| FC250R | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Power Module:dc-dc Converter; 18 Vdc to 36 Vdc Input, 28 Vdc Output; 250 W |
| FC250R1 | 制造商:MA-COM 制造商全称:M/A-COM Technology Solutions, Inc. 功能描述:Power Module:dc-dc Converter; 18 Vdc to 36 Vdc Input, 28 Vdc Output; 250 W |
| FC2528 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| FC252U | 制造商:AB 功能描述:POT2.5K ALLEN BRADLEY S7D7B |
发布紧急采购，3分钟左右您将得到回复。