- 您现在的位置：买卖IC网 > PDF目录18740 > FI212C245032-T (Taiyo Yuden)FILTER BALANCE 2.4GHZ BLUETOOTH PDF资料下载
参数资料
| 型号： | FI212C245032-T |
| 厂商： | Taiyo Yuden |
| 文件页数： | 14/14页 |
| 文件大小： | 0K |
| 描述： | FILTER BALANCE 2.4GHZ BLUETOOTH |
| 产品培训模块： | Filter Antenna |
| 产品目录绘图： | FI212C Series Top FI212C Series Bottom |
| 标准包装： | 1 |
| 系列： | FI |
| 频率： | 2.45GHz Center |
| 带宽： | 100MHz |
| 滤波器类型： | 平衡 |
| 纹波： | 1dB |
| 插入损耗： | 3.7dB |
| 封装/外壳： | 0805（2012 公制），6 PC 板 |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 高度（最大）： | 0.039"（1.00mm） |
| 尺寸/尺寸： | 0.079" L x 0.049" W（2.00mm x 1.25mm） |
| 产品目录页面： | 591 (CN2011-ZH PDF) |
| 其它名称： | 587-2218-6 |
3. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
? Recommended conditions
Precautions
Technical
considerations
Ambient temperature : －20～＋40℃
Humidity : Below 70%RH
The ambient temperature must be kept below 30℃.
Even under ideal storage conditions, the solderbility of electrodes decreases gradually, so filters should be mounted within 6 months
from the time of delivery.
? The packaging material should be kept where no chlorine or sulfur exists in the air.
◆Storage
1. If the parts are stocked in a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of
terminal electrodes and deterioration of taping/ packaging materials may take place. For this reason, components should be used within 6
months from the time of delivery. If exceeding the above period, please check the solderability before using the filter.
■ Please contact of our offices for further details of specifications.
All of the standard values listed here are subject to change without notice.
Therefore, please check the specifications carefully before use.
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipfilter_prec_e-E02R01
相关PDF资料 |
PDF描述 |
|---|---|
| XC09-038PKT-R | MODEM RF 900MHZ RS232/485 38.4K |
| DOC052F-020.0M | OSC OCXO 20.0 MHZ 3.3V SMT |
| GLDD01D | SWITCH TOP ROLLR ARM SNAP SPDT |
| XC09-009PKTI-R | MODEM RF 900MHZ RS232/485 9600 |
| HPI-17 | XFRMR PWR 115V 15.2A 1.75VA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FI212C245033-T | 功能描述:信号调节 BALNCD BNDPASS FLTR HI FREQ MULTILYR RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| FI212C245034-T | 功能描述:信号调节 BANDPASS FLTR HI FREQ MULTILYR RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| FI212C245035-T | 功能描述:信号调节 BALNCD BNDPASS FLTR HI FREQ MULTILYR RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| FI212C245036-T | 功能描述:信号调节 BANDPASS FLTR HI FREQ MULTILYR RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
| FI212C245041-T | 功能描述:信号调节 BALNCD BNDPASS FLTR HI FREQ MULTILYR RoHS:否 制造商:EPCOS 产品:Duplexers 频率:782 MHz, 751 MHz 频率范围: 电压额定值: 带宽: 阻抗:50 Ohms 端接类型:SMD/SMT 封装 / 箱体:2.5 mm x 2 mm 工作温度范围:- 30 C to + 85 C 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。