- 您现在的位置：买卖IC网 > PDF目录18772 > FIREFLY-TX16 (RF Solutions)TRANSMITTER FM RMT 433MHZ 16SW PDF资料下载
参数资料
| 型号： | FIREFLY-TX16 |
| 厂商： | RF Solutions |
| 文件页数： | 4/6页 |
| 文件大小： | 1149K |
| 描述： | TRANSMITTER FM RMT 433MHZ 16SW |
| 标准包装： | 1 |
| 功能： | 发射器 |
| 调制或协议： | FM |
| 频率： | 433.92MHz |
| 接口： | 手持型，15 按钮 |
| 功率 - 输出： | 10mW |
| 特点： | 16 开关 |
| 电源电压： | 3V |
| 产品目录页面： | 582 (CN2011-ZH PDF) |
DSFIREFLY-4 March 08
?008 REG No 277 4001, ENGLAND.
Page 4
FIREFLY
FIREBLADE
RADIO REMOTE CONTROL SYSTEMS
To learn a new transmitter switch follow this procedure
Any transmitter button can be learnt to one or many of the receiver output relays.
Each button must be learnt to each relay individually by following this procedure:
1. To select the receiver output relay to learn to:
a. Briefly press the receiver Learn switch (SW1) once
b. The Learn LED will flash once to indicate output relay 1 is selected
c. After the LED stops flashing, press the Learn switch again to select the next relay channel
d. Repeat step c until the required output relay is selected.
2. Press the button on the transmitter you want to learn to the relay output.
3. The Learn LED will then illuminate, press the same transmitter button again.
4. The Learn LED will then flash to indicate learning is complete.
5. To test the operation, press the transmitter button again and you will hear the relay click as it operates.
Erasing Receivers Memory
1. Press and hold the receiver Learn Switch for approx 10 seconds.
2. When the Learn LED turns OFF all memory is erased
3. This is factory default state which is indicated by all output LEDs flashing together.
NOTE: You cannot erase individual Tx encoders
Receiver Outputs
The jumper links configure the outputs to be Momentary, Latching or Timed.
The jumper links are made / removed by a small link cap placed over the pin header.
Jumper Links
(LK2 - 4)
Outputs 2 - 4
Open
Mom (The Output operates for as long as the transmitter switch is held on)
Connected
Latch (The Output changes state each time the Transmitter is operated)
LK0
LK1
Relay Output 1 Only
Open
Open
Momentary
Open
Connected
Output 1 Latching
Connected
Open
Fixed to ?Second Momentary o/p
Connected
Connected
Output 1, 0 to 5 minutes using Timer selection Potentiometer.
相关PDF资料 |
PDF描述 |
|---|---|
| PC-10-120 | XFRMR PWR 115V 5V 240MA 1.2VA |
| FIREFLY-TX4 | TRANSMITTER FM REMOTE 433MHZ 4SW |
| PC-34-35 | XFRMR PWR 115V 34VCT 35MA |
| FIREFLY-TX2 | TRANSMITTER FM REMOTE 433MHZ 2SW |
| PC-28-40 | XFRMR PWR 115V 28VCT 40MA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FIREFLY-TX2 | 功能描述:TRANSMITTER FM REMOTE 433MHZ 2SW RoHS:是 类别:RF/IF 和 RFID >> RF 接收器、发射器及收发器的成品装置 系列:- 标准包装:5 系列:MultiModem® iCell 功能:收发器，HSPA，调制解调器 调制或协议:GPRS，GSM，EDGE 频率:850MHz，900MHz，1.8GHz，1.9GHz 应用:- 接口:RS-232，USB 灵敏度:- 功率 - 输出:- 数据传输率 - 最大:7.2 Mbps 特点:- 电源电压:9 V ~ 32 V，USB 其它名称:881-1125 |
| FIREFLY-TX4 | 功能描述:TRANSMITTER FM REMOTE 433MHZ 4SW RoHS:是 类别:RF/IF 和 RFID >> RF 接收器、发射器及收发器的成品装置 系列:- 标准包装:5 系列:MultiModem® iCell 功能:收发器，HSPA，调制解调器 调制或协议:GPRS，GSM，EDGE 频率:850MHz，900MHz，1.8GHz，1.9GHz 应用:- 接口:RS-232，USB 灵敏度:- 功率 - 输出:- 数据传输率 - 最大:7.2 Mbps 特点:- 电源电压:9 V ~ 32 V，USB 其它名称:881-1125 |
| FIREFLY-TX8 | 功能描述:RF TRANSMITTER 8 BUTTON RoHS:是 类别:RF/IF 和 RFID >> RF 接收器、发射器及收发器的成品装置 系列:- 标准包装:5 系列:MultiModem® iCell 功能:收发器，HSPA，调制解调器 调制或协议:GPRS，GSM，EDGE 频率:850MHz，900MHz，1.8GHz，1.9GHz 应用:- 接口:RS-232，USB 灵敏度:- 功率 - 输出:- 数据传输率 - 最大:7.2 Mbps 特点:- 电源电压:9 V ~ 32 V，USB 其它名称:881-1125 |
| FIREFLY-TX-IPKIT | 功能描述:TX BELT CLIP/O-RING TO IP67 RoHS:是 类别:RF/IF 和 RFID >> RF配件 系列:- 标准包装:1 系列:* |
| FIREFOX386SX-CHIPSET | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microprocessor |
发布紧急采购，3分钟左右您将得到回复。