emifil01_reli-PR2
emil01_reli_e-01
■ RELIABILITY DATA
MULTILAYER EMI SUPPRESSION FILTER
*This catalog contains the typical specication only due to the limitation of space. When you consider the purchase of our products, please check our specication.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. Operating Temperature Range
Specied
ー25~+85℃
2. Storage Temperature Range
Specied
ー25~+85℃
3. Rated Voltage
Specied
10V DC
4. Rated Current
Specied
100mA DC
5. Cutoff frequency (T Series)
Specied
18MHz±3.6MHz, 25MHz±5MHz, 40MHz±10MHz, 100MHz±20MHz,
160MHz±30MHz, 200MHz±40MHz, 400MHz±80MHz
【Test Methods and Remarks】
Measuring equipment
: HP8753D (or its equivalent)
Measuring source
: 0dBm
Input-Output impedance : 50Ω
6. Impedance (TZ Series)
Specied
70Ω±30%, 100Ω±30%, 200Ω±30%
【Test Methods and Remarks】
Measuring frequency : 100MHz
Measuring equipment : HP4291A (or its equivalent)
Measuring jig
: HP16192A
Measuring source
: ー20dBm
7. Capacitance (TZ Series)
Specied
17pF±20%, 50pF±20%, 85pF±20%
【Test Methods and Remarks】
Measuring equipment : HP4194A (or its equivalent)
Measuring voltage
: 0.5V
Measuring frequency : 1MHz
Capacitance measurement between Terminals 1 and 2.
8. DC Resistance
Specied
2Ω max., 3Ω max. (FK2125T107AL)
【Test Methods and Remarks】
Conduct measurement between Terminals 1 and 3.
9. Insulation Resistance
Specied
30MΩ min.
【Test Methods and Remarks】
Conduct measurement between Terminals 1 and 2.
Applied voltage : 10VDC
11. Solderability
Specied
At least 75% of terminal electrode is covered by new solder.
【Test Methods and Remarks】
Solder temperature
: 230±5℃
Duration
: 4±1 sec.
Preheating temperature : 150 to 180℃
Preheating time
: 2 to 3 min.
Flux
: Immersion into methanol solution with colophony for 3 to 5 sec.
12. Resistance to Soldering
Specied
No signicant abnormality in appearance.
【Test Methods and Remarks】
Solder temperature
: 260±5℃
Duration
: 10±0.5 sec.
Preheating temperature : 150 to 180℃
Preheating time
: 2 to 3 min.
Flux
: Immersion into methanol solution with colophony for 3 to 5 sec.
13. Thermal Shock
Specied
No mechanical damage.
Insulation resistance (between 1 and 2) : 20MΩ min.
DC resistance (between 1 and 3)
: 2Ω max.
3Ω max. (FK2125T107AL)
【Test Methods and Remarks】
Conditions for 1 cycle
Step1 :
Minimum operating temperature +0
-3 ℃ : 30±3 min
Step2 :
Room temperature
: 2 to 3 min
Step3 :
Maximum operating temperature +3
-0 ℃ : 30±3 min
Step4 :
Room temperature
: 2 to 3 min
Number of cycles : 5
Recovery
: 2 to 3 hrs of recovery under the standard condition after the test.
10. Resistance to Flexure of Substrate
Specied
No mechanical damage.
【Test Methods and Remarks】
Warp
: 2mm
Testing board : glass epoxy-resin substrate
Thickness
: 0.8mm