- 您现在的位置：买卖IC网 > PDF目录17794 > FL05RD100AZ (Taiyo Yuden)WOUND TORROIDS BEAD 10UH 1.5A PDF资料下载
参数资料
| 型号： | FL05RD100AZ |
| 厂商： | Taiyo Yuden |
| 文件页数： | 11/11页 |
| 文件大小： | 0K |
| 描述： | WOUND TORROIDS BEAD 10UH 1.5A |
| 标准包装： | 1,500 |
| 系列： | FL |
| 频率对应阻抗： | 900 欧姆 @ 100MHz |
| 额定电流： | 1.5A |
| DC 电阻(DCR)： | 最大 50 毫欧 |
| 滤波器类型： | 差模 - 单线 |
| 封装/外壳： | 径向 |
| 安装类型： | 通孔 |
| 包装： | 托盘 |
| 高度（最大）： | 0.354"（9.00mm） |
| 尺寸/尺寸： | 0.354" L x 0.146" W（9.00mm x 3.70mm） |
■ PRECAUTIONS
CAL Type, LH Type, FB Type, FL Type, LA Type
1. Circuit Design
◆ Operating environment
1. The products described in this speci?cation are intended for use in general electronic equipment,(of ?ce supply equipment, telecommunications systems,
Precautions
measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high
reliability (traf ?c systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where
product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
2. PCB Design
Precautions
Technical
consider-
ations
◆ Design
1. Please design insertion pitches as matching to that of leads of the component on PCBs.
◆ Design
1. When Inductors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not, it will cause breakage of
the terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs.
3. Considerations for automatic placement
◆ Adjustment of mounting machine
Precautions
Technical
consider-
ations
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
◆ Adjustment of mounting machine
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆ Wave soldering
1. Please refer to the speci?cations in the catalog for a wave soldering.
2. Do not immerse the entire inductor in the ?ux during the soldering operation.
◆ Lead free soldering
1. When using products with lead free soldering, we request to use them after con?rming adhesion, temperature of resistance to soldering heat, soldering etc
suf ?ciently.
Precautions
Technical
consider-
ations
Recommended conditions for using a soldering iron:
? Put the soldering iron on the land-pattern.
? Soldering iron's temperature - Below 350 ℃
? Duration - 3 seconds or less
? The soldering iron should not directly touch the inductor.
◆ Re?ow soldering
1. As for re?ow soldering, please contact our sales staff.
◆ Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of
the products.
5. Cleaning
◆ Cleaning conditions
Precautions
Technical
consider-
ations
1. CAL type, LH type, LA Type
Please do not do cleaning by a supersonic wave.
◆ Cleaning conditions
1. CAL type, LH type, LA Type
If washing by supersonic waves, supersonic waves may deform products.
6. Handling
◆ Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆ Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
Precautions
Technical
consider-
ations
2. LH type
If inductors are dropped onto the ?oor or a hard surface they should not be used.
◆ Packing
1. Please do not give the inductors any excessive mechanical shocks.
In loading, please pay attention to handling indication mentioned in a packing box (a loading direction / number of maximum loading / fragile item).
◆ Handling
1. There is a case that a characteristic varies with magnetic in?uence.
◆ Mechanical considerations
1. There is a case to be damaged by a mechanical shock.
2. LH type
There is a case to be broken by a fall.
◆ Packing
1. There is a case that a lead wire could be deformed by a fall or an excessive shock.
7. Storage conditions
◆ Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should
be controlled.
Precautions
Technical
consider-
ations
Recommended conditions
? Ambient temperature 0 ～ 40 ℃
? Humidity Below 70% RH
The ambient temperature must be kept below 30 ℃ . Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.
For this reason, inductors should be used within one year from the time of delivery.
In case of storage over 6 months, solderability shall be checked before actual usage.
◆ Storage
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
＊ This catalog contains the typical speci ?cation only due to the limitation of space. When you consider the purchase of our products, please check our speci ?cation.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
相关PDF资料 |
PDF描述 |
|---|---|
| AT621CF24 | LAMP BI-COLOR LED 24VOLT |
| ILBB1812ER121V | FERRITE BEAD 120 OHM 1812 |
| ILAS1206ER600V | FERRITE BEAD 60 OHM 1206 |
| SET WH AU OA | SWITCH PUSH SPDT 0.01A 24V |
| F6UEETB | SWITCH PUSH 6PDT 0.5A 125V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FL05RD1R0E | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 WND TORROIDS/BD S 1.0+1.0/-0.5uH RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
| FL05RD1R0ET | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 WND TORROIDS/BD S 1.0+1.0/-0.5uH RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
| FL05RD1R0EZ | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 WND TORROIDS/BD S 1.0+1.0/-0.5uH RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
| FL05RD200A | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 WND TORROIDS/BD S 20MIN uH RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
| FL05RD200AT | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 WND TORROIDS/BD S 20MIN uH RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
发布紧急采购，3分钟左右您将得到回复。