参数资料
型号: FMA-461F
厂商: CRANE ELECTRONICS INC
元件分类: 数据传输滤波器
英文描述: 1 FUNCTIONS, 40 V, 3.8 A, DATA LINE FILTER MODULE
封装: FLANGED, METAL PACKAGE-5
文件页数: 1/9页
文件大小: 560K
代理商: FMA-461F
Description
The FM-461, FMA-461, and FMB-461 EMI filter modules have been
specifically designed to reduce the input line reflected ripple current
of Interpoint’s MTO, MTW, MHE, MLP, and MFW Series of DC/DC
converters. They are intended for use in applications of high frequency
(100 kHz) switch-mode DC/DC converters which must meet MIL-STD-
461C levels of conducted power line noise.
These filters are built using thick-film hybrid technology and are sealed
in metal packages for military, aerospace, and other high-reliability
applications. See Section B8, cases H3, H5, K4, and K6 for dimen-
sions. See Section C2 for screening options.
MIL-STD NoISe MaNageMeNT
When used in conjunction with Interpoint’s DC/DC converters (see
connection diagram, Figure 2), the input ripple current will be reduced
by 40 dB within the frequency band of 100 kHz to 50 MHz. This gives
the filter/converter combination a performance which exceeds the
CE03 test limit of MIL-STD-461C. The CE03 performance of a model
MHE2805S converter with and without the FM-461 filter is shown in
Figures 6 and 7.
FILTer operaTIoN
A fast-reacting (1 picosecond) transient suppressor clamps the input
voltage at approximately 47 V, protecting the DC/DC converter from
line induced transients.
The filters are rated to operate, with no degradation of performance,
over the temperature range of –55°C to +85°C (as measured at the
baseplate). Above 85°C, input voltage and current must be derated
as specified in “Derating” on the following page. The maximum power
dissipation of the filters at maximum input current represents a power
loss of less than 3% at typical input voltage.
LayouT requIreMeNTS
The case of the filter must be connected to the case of the converter
through a low impedance connection to minimize EMI.
Features
–55°C to +85°C operation
0 to 40 VDC volt input
Up to 40 dB attenuation
110 kHz to 50 MHz
Transient suppression
Compliant to
MIL-STD-461C, CE03
Size (max.): Non-flanged case H3 or H5
2.125 x 1.125 x 0.495* inches (53.98 x 28.58 x 12.57* mm)
Flanged case K4 or K6
2.910 x 1.125 x 0.495* inches (73.91 x 28.58 x 12.57* mm)
See cases H3, H5, K4, and K6, for dimensions.
*Height varies depending on model.
Weight:
Maximum – FM-461 38 grams, FMA-461 42 grams, FMB-461 43 grams
Screening: Standard or ES. See “85°C Non-QML Products–Environmental Screening
(Standard & ES)“ screening table for more information.
MODELS
INpuT VoLTage
aND
CurreNT
INpuT (V)
0 - 40
CurreNT (a)
1.75
3.8
5.0
1
FM-461, FMA-461
And FMB-461
1.75 to 5 AMp
EMI Input FIltErs
28 Volt Input
NOT RECOMMENDED FOR NEW DESIGNS
相关PDF资料
PDF描述
FM-461/ES 1 FUNCTIONS, 40 V, 1.75 A, DATA LINE FILTER MODULE
FM-461F/ES 1 FUNCTIONS, 40 V, 1.75 A, DATA LINE FILTER MODULE
FM-461F 1 FUNCTIONS, 40 V, 1.75 A, DATA LINE FILTER MODULE
FM-461 1 FUNCTIONS, 40 V, 1.75 A, DATA LINE FILTER MODULE
FMBC-0927-0810 480 V, 50/60 HZ, THREE PHASE EMI FILTER
相关代理商/技术参数
参数描述
FMA-461F/ES 制造商:未知厂家 制造商全称:未知厂家 功能描述:EMI Filter
FMA4A 制造商:ROHM 制造商全称:Rohm 功能描述:General purpose (dual digital transistors)
FMA4AT148 功能描述:开关晶体管 - 偏压电阻器 DUAL PNP 50V 100MA RoHS:否 制造商:ON Semiconductor 配置: 晶体管极性:NPN/PNP 典型输入电阻器: 典型电阻器比率: 安装风格:SMD/SMT 封装 / 箱体: 直流集电极/Base Gain hfe Min:200 mA 最大工作频率: 集电极—发射极最大电压 VCEO:50 V 集电极连续电流:150 mA 峰值直流集电极电流: 功率耗散:200 mW 最大工作温度: 封装:Reel
FMA5 制造商:Honeywell Sensing and Control 功能描述:
FMA500 制造商:FILTRONIC 制造商全称:FILTRONIC 功能描述:OC-192 MODULATOR PRE-DRIVER AMPLIFIER