- 您现在的位置：买卖IC网 > PDF目录21629 > FMBN04BD (NKK Switches)KEYPAD 4 KEY MEMBRANE SW BLACK PDF资料下载
参数资料
| 型号： | FMBN04BD |
| 厂商： | NKK Switches |
| 文件页数： | 4/4页 |
| 文件大小： | 0K |
| 描述： | KEYPAD 4 KEY MEMBRANE SW BLACK |
| 产品目录绘图： | FMBN04B(D,E) |
| 特色产品： | FM Series of Membrane Switch Keypads |
| 标准包装： | 1 |
| 系列： | FM |
| 开关类型： | 膜片（圆顶按钮） |
| 按键数： | 4 |
| 矩阵（列数 x 行数）： | 1 x 4 |
| 输出类型： | 公共总线 |
| 键控类型： | 聚酯覆层 |
| 图例： | 可定制（包括） |
| 可换式图例： | 是 |
| 发光： | 不发光 |
| 密封等级： | 无 |
| 产品目录页面： | 2472 (CN2011-ZH PDF) |
| 相关产品： | 609-3452-ND - CONN ZIF CIC 5POS DIP 1MM VERT 609-3451-ND - CONN ZIF CIC 5POS DIP 1MM R/A |
| 其它名称： | 360-2294 |
Series FM
INSERTABLE LEGEND CARDS
Membranes
Instructions for Customizing Insertable Legends
The membrane keypad assembly comes with three insertable legend cards: yellow, gray and black.
The following provides guidelines for creating and insertion of legend cards for the membrane switch
keypad assembly. Read all of the instructions prior to customizing and inserting the legend card.
? Using the borders on the insertable legend card as a guide, be sure characters on the card are
about 1.5mm (.059”) within these borders. This is the printable area.
? Legend characters may be drawn, printed, etc. Be sure that application choice is completely
dry before inserting into membrane keypad assembly.
Border
Printable
Area
Card
(1.5) Typ
.059
Surface
Sheet
(1.5) Typ
.059
OP
Instructions for Inserting Legend Card
? Note correct orientation of insertable legend card. Insert card under surface sheet, and use caution
to avoid bending the membrane keypad assembly. Do not use pointed object to insert card, and do
7
8
4
9
5
1
A
6
2
0
B
3
ST
C
D
not remove surface sheet.
? Align and center all legend characters within the squares of the surface sheet.
? Smooth any wrinkles or air pockets from surface sheet.
? Peel off adhesive strip from the membrane keypad assembly.
? The legend card is now firmly in place and cannot be removed.
? Detach the protective film.
Protective
Film
Surface
Sheet
Adhesive Strip
Recommended Connectors for 5 Pin
Straight: FCI Part No. SLW5S-5C7LF
Right Angle: FCI Part No. SLW5R-5C7LF
Connectors
Recommended Connectors for 8 Pin
Straight: FCI Part No. SLW8S-5C7LF
Right Angle: FCI Part No. SLW8R-5C7LF
PRECAUTIONS FOR HANDLING
? Assembly of legend card insert is handled by the customer. Therefore, we recommend to evaluate the finished product with the card
assembled.
? Nonilluminated products have a loophole on each key. It is possible to add optional illumination by installing appropriate LEDs.
Legend card does not have loopholes.
? To test proper electrical operation of switches, use of an electric buzzer is recommended.
? Use an additional chattering prevention circuit for the switch circuit.
? Do not operate switches with pointed objects (i.e. screwdrivers) to prevent perforation of film overlay.
? Use an FPC connector that corresponds to the printed circuit. Contact factory for suitable connectors.
L
? During assembly and installation of legends place devices on a level, sturdy surface. We do not recommend assembly and installa -
tion of device using a free hand or on a soft surface.
? Do not fold, bend, or apply pressure to the product.
? These devices contain adhesive that may emit noise. This does not affect product functionality.
? Do not depress any switch areas during assembly/installation.
? These membrane switches are built with air vents. Prior to installation, make corresponding holes to allow air vents to function.
These holes should first be aligned with the membrane switch device, then made on the body of the final installation structure.
Do not allow water or oil to penetrate through the air vents. Entry of any liquids through the air vents may cause contact failure.
APPLICATIONS
? Communication equipment
? Automation equipment
L18
? Office machines
? Electronic equipment
www.nkk.com
? Electronic equipment for national security
? Amusement equipment
相关PDF资料 |
PDF描述 |
|---|---|
| CB1AF-M-12V | RELAY AUTOMOTIVE SPST 40A 12V |
| CB1A-R-P-12V | RELAY AUTOMOTIVE SPST 40A 12V |
| G8P-1C4P-V DC18 | RELAY GEN PURPOSE SPDT 10A 18V |
| G6RL-14-SR-ASI DC3 | RELAY GENERAL PURPOSE SPDT 8A 3V |
| KB16SKW01-5D-JB | SWITCH PUSHBUTTON SPDT 1A 125V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FM-BN04BD | 制造商:Nihon Dempa Kogyo Co (NDK) 功能描述:Switches,Sheet,4-key,Click,NoLight |
| FMBN04BE | 功能描述:输入设备 4KEY NONILLUMINATED MEMBRANE SWTCH GRAY RoHS:否 制造商:Cherry Electrical 颜色:Gray 特点:Precision switching 键盘接口:PS/2 键数量:101 / 102 触摸板接口: |
| FM-BN04BE | 制造商:Nihon Dempa Kogyo Co (NDK) 功能描述:Switches,Sheet,4-key,Click,NoLight |
| FM-BN12B0 | 制造商:Nihon Dempa Kogyo Co (NDK) 功能描述:Switches,Sheet,12-key,Click,NoLight |
| FM-BN16B0 | 制造商:Nihon Dempa Kogyo Co (NDK) 功能描述:Switches,Sheet,16-key,Click,NoLight |
发布紧急采购，3分钟左右您将得到回复。