参数资料
型号: FMGA-461
厂商: CRANE ELECTRONICS INC
元件分类: 数据传输滤波器
英文描述: EMI INPUT FILTER 28 VOLT INPUT SURFACE MOUNT
中文描述: 1 FUNCTIONS, 40 V, 0.8 A, DATA LINE FILTER
封装: HERMETIC SEALD, METAL PACKAGE-18
文件页数: 1/14页
文件大小: 282K
代理商: FMGA-461
FMSA/FMGA EMI Input Filters
Crane Aerospace & Electronics Power Solutions
Crane Aerospace & Electronics
Electronics Group (Interpoint Brand)
PO Box 97005 Redmond WA 98073-9705
425.882.3100 electronics@craneae.com
www.craneae.com
Page 1 of 14
Rev D - 20060508
28 VOLT INPUT – 0.8 AMP
FMSA SERIES EMI FILTER
The FMSA-461 EMI filter modules have been designed as a
companion for Interpoint MSA flyback power converters. Multiple
MSA power converters can be operated from a single filter provided
the total power line current does not exceed the filter maximum
rating. The FMSA filter will reduce the MSA’s power line reflected
ripple current to within the limit of MIL-STD-461C, Method CE03, as
shown in the example of Figures 4 and 5.
The FMSA is fabricated using thick film hybrid technology and is
sealed in a metal package for military, aerospace and other appli-
cations requiring EMI suppression. The filter uses only ceramic
capacitors for reliable high temperature operation.
OPERATION
The MSA power converter has an internal 2 μF capacitor across its
input power terminals. When the MSA and FMSA filters are used
together, this capacitor becomes part of the filter and forms its final
LC output section. When 2 or 3 MSAs are used with a single filter,
this capacitor becomes 4 μF or 6 μF respectively, rather than 2 μF,
improving the rejection vs. frequency.
The FMSA filter can also be used with other types of Interpoint
power converters (MHF, MHF+, MHE, MHD, and DCH series) to
comply with CE03. For MHF, MHF+, MHD, and MHE models, the
converter has an LC type line filter such that an inductor is seen
looking into its positive input terminal. For these converters, it is
necessary to terminate the filter with a capacitor to insure uncondi-
tionally stable operation. A capacitor across the filter output termi-
nals of greater than 4μF or the optional damping circuit shown on
the connection diagram will be adequate for stable operation. No
capacitor is required for MSA, or DCH models.
OPTIONAL DAMPING CIRCUIT
The optional damping circuit (Figure 2) can be used to prevent filter
overshoot caused by MIL-STD-704A 80 V, or other, transients
having rise times of less than 200 μSec. This damping can be alter-
nately provided with a 1.50 Ω resistor in series with the filter positive
input where the additional line loss can be tolerated. For transients
with rise times of greater than 200 μsec, there is no overshoot and
the damping circuit is not required.
LAYOUT REQUIREMENTS
The case of the filter must be connected to the case of the converter
through a low impedance connection to minimize EMI.
FEATURES
–55°C to +125°C operation
50 dB min. attenuation at 500 kHz
differential mode
45 dB min. attenuation at 5MHz
common mode
Compliant to MIL-STD-461C, CE03
Compatible with MIL-STD-704E
DC power bus
Compatible with MIL-STD-704A
through E (FMGA)
MODEL
FMSA-461
FMGA-461
0.8 amp
相关PDF资料
PDF描述
FMGA-461Z/ES EMI INPUT FILTER 28 VOLT INPUT SURFACE MOUNT
FMSA-461 EMI INPUT FILTER 28 VOLT INPUT
FMSA-461/883 EMI INPUT FILTER 28 VOLT INPUT
F202CO5-24V/30-N T-1 3/4 SINGLE COLOR LED, ORANGE, 5 mm
F202CO5-28V/30-BP T-1 3/4 SINGLE COLOR LED, ORANGE, 5 mm
相关代理商/技术参数
参数描述
FMGA-461/883 制造商:CRANE 制造商全称:CRANE 功能描述:EMI INPUT FILTER 28 VOLT INPUT SURFACE MOUNT
FMGA-461Z/ES 制造商:INTERPOINT 制造商全称:INTERPOINT 功能描述:EMI INPUT FILTER 28 VOLT INPUT SURFACE MOUNT
FMG-G26S 制造商:Sanken Electric Co Ltd 功能描述:Diode Switching 600V 4A 2-Pin(2+Tab) TO-220F 制造商:Sanken Electric Co Ltd 功能描述:DIODE UFAST 600V 4A TO220F-2
FMG-G2CS 制造商:Sanken Electric Co Ltd 功能描述:Diode Switching 1KV 4A 2-Pin(2+Tab) TO-220F Bulk 制造商:Sanken Electric Co Ltd 功能描述:DIODE UFAST 1KV 3A TO220F-2
FMG-G36S 制造商:未知厂家 制造商全称:未知厂家 功能描述:ULTRA-FAST-RECOVERY RECTIFIER DIODES