参数资料
型号: FPF2116
厂商: Fairchild Semiconductor
文件页数: 9/12页
文件大小: 0K
描述: IC LOAD SWITCH PROTECT SOT23-5
产品变化通告: Mold Compound Change 12/Dec/2007
标准包装: 1
系列: IntelliMax™
类型: 高端开关
输出数: 1
Rds(开): 160 毫欧
内部开关:
电流限制: 200mA
输入电压: 1.8 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: SC-74A,SOT-753
供应商设备封装: SOT-23-5
包装: 标准包装
产品目录页面: 1217 (CN2011-ZH PDF)
其它名称: FPF2116DKR
Description of Operation
The FPF2116 is a current limited switch that protects systems
and loads which can be damaged or disrupted by the
application of high currents. The core of the device is a 0.125 ?
P-channel MOSFET and a controller capable of functioning over
a wide input operating range of 1.8-5.5V. The controller protects
against system malfunctions through current limiting, under-
voltage lockout and thermal shutdown. The current limit is
preset for 200mA.
On/Off Control
The ON pin controls the state of the switch. Activating ON
continuously holds the switch in the on state so long as there is
no fault. An under-voltage on V IN or a junction temperature in
excess of 150°C overrides the ON control to turn off the switch.
In addition, excessive current will cause the switch to turn off.
The part has an Auto-Restart feature which will automatically
turn the switch on again after 480 ms. ON is active HI and has a
low threshold making it capable of interfacing with low voltage
signals. When the MOSFET is off, the body diode is disabled so
no current can flow through it.
Fault Reporting
Upon the detection of an over-current, an input under-voltage,
or an over-temperature condition, the FLAGB signals the fault
mode by immediately activating LO. The FLAGB goes LO at the
end of the blanking time. It will remain LO during the fault and
immediately returns HI at the end of the fault condition. FLAGB
is an open-drain MOSFET which requires a pull-up resistor
between V IN and FLAGB. During shutdown, the pull-down on
FLAGB is disabled to reduce current draw from the supply.
Current Limiting
The current limit ensures that the current through the switch
doesn't exceed 400mA while not limiting at less than 200mA.
The part has a blanking time of 30 ms, nominally, during which
the switch will act as a constant current source. At the end of the
blanking time, the switch will be turned-off and the FLAGB pin
will activate to indicate that current limiting has occurred.
Under-Voltage Lockout
The under-voltage lockout turns-off the switch if the input
voltage drops below the under-voltage lockout threshold. With
the ON pin active the input voltage rising above the
under-voltage lockout threshold will cause a controlled turn-on
of the switch which limits current over-shoots.
Thermal Shutdown
The thermal shutdown protects the part from internally or
externally generated excessive temperatures. During an over-
temperature condition the FLAGB is activated and the switch is
turned-off. The switch automatically turns-on again if
temperature of the die drops below the threshold temperature.
FPF2116 Rev. D
9
www.fairchildsemi.com
相关PDF资料
PDF描述
FPF2124 IC LOAD SWITCH ADVANCED SOT23-5
FPF2164 IC LOAD SWITCH ADJ CURR 6-MLP
FPF2165R IC LOAD SW FULL FUNCT ADJ 6MLP
FPF2172 IC LOAD MANAGEMENT ADV POWER33-6
FPF2174 IC LOAD SWITCH ADVANCED 6MLP 3X3
相关代理商/技术参数
参数描述
FPF2116 制造商:Fairchild Semiconductor Corporation 功能描述:FULL FUNCTION LOAD SWITCH 制造商:Fairchild Semiconductor Corporation 功能描述:IC, HIGH SIDE LOAD SWITCH, 5.5V, SOT23-5
FPF2116_08 制造商:FAIRCHILD 制造商全称:Fairchild Semiconductor 功能描述:IntelliMAX⑩ Advanced Load Management Products
FPF2123 功能描述:电源开关 IC - 配电 SOT23-5 ADV LOAD MANAGEMENT PRODUCTS RoHS:否 制造商:Exar 输出端数量:1 开启电阻(最大值):85 mOhms 开启时间(最大值):400 us 关闭时间(最大值):20 us 工作电源电压:3.2 V to 6.5 V 电源电流(最大值): 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-5
FPF2123_06 制造商:FAIRCHILD 制造商全称:Fairchild Semiconductor 功能描述:IntelliMAX⑩ Advanced Load Management Products
FPF2124 功能描述:功率驱动器IC ADV LOAD MANAGEMENT RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube