参数资料
| 型号： | FPF2124 |
| 厂商： | Fairchild Semiconductor |
| 文件页数： | 9/13页 |
| 文件大小： | 0K |
| 描述： | IC LOAD SWITCH ADVANCED SOT23-5 |
| 产品变化通告： | Mold Compound Change 12/Dec/2007 |
| 标准包装： | 1 |
| 系列： | IntelliMax™ |
| 类型： | 高端开关 |
| 输出数： | 1 |
| Rds（开）： | 160 毫欧 |
| 内部开关： | 是 |
| 电流限制： | 可调 |
| 输入电压： | 1.8 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SC-74A，SOT-753 |
| 供应商设备封装： | SOT-23-5 |
| 包装： | 标准包装 |
| 产品目录页面： | 1217 (CN2011-ZH PDF) |
| 其它名称： | FPF2124DKR |
Description of Operation
The FPF2123, FPF2124, and FPF2125 are current limited
switches that protect systems and loads which can be damaged
or disrupted by the application of high currents. The core of
each device is a 0.125 P-channel MOSFET and a controller
capable of functioning over a wide input operating range of
1.8-5.5V. The controller protects against system malfunctions
through current limiting under-voltage lockout and thermal
shutdown. The current limit is adjustable from 150mA to 1.5A
through the selection of an external resistor.
On/Off Control
The ON pin controls the state of the switch. When ON is high,
the switch is in the on state. Activating ON continuously holds
the switch in the on state so long as there is no fault. For all
versions, an under-voltage on V IN or a junction temperature in
excess of 140°C overrides the ON control to turn off the switch.
In addition, excessive currents will cause the switch to turn off in
the FPF2123 and FPF2124. The FPF2123 has an Auto-Restart
feature which will automatically turn the switch on again after
160ms. For the FPF2124, the ON pin must be toggled to turn-on
the switch again. The FPF2125 does not turn off in response to
an over current condition but instead remains operating in a
constant current mode so long as ON is active and the thermal
shutdown or under-voltage lockout have not activated.
The ON pin control voltage and V IN pin have independent
recommended operating ranges. The ON pin voltage can be
driven by a voltage level higher than the input voltage.
Current Limiting
The current limit ensures that the current through the switch
doesn't exceed a maximum value while not limiting at less than
a minimum value. The current at which the parts will limit is
adjustable through the selection of an external resistor
connected to ISET. Information for selecting the resistor is found
in the Application Info section. The FPF2123 and FPF2124
have a blanking time of 10ms, nominally, during which the
switch will act as a constant current source. At the end of the
blanking time, the switch will be turned-off. The FPF2125 has
no current limit blanking period so it will remain in a constant
current state until the ON pin is deactivated or the thermal
shutdown turns-off the switch.
Under-Voltage Lockout
The under-voltage lockout turns-off the switch if the input
voltage drops below the under-voltage lockout threshold. With
the ON pin active, the input voltage rising above the
under-voltage lockout threshold will cause a controlled turn-on
of the switch which limits current over-shoots.
Thermal Shutdown
The thermal shutdown protects the die from internally or
externally generated excessive temperatures. During an
over-temperature condition the switch is turned-off. The switch
automatically turns-on again if the temperature of the die drops
below the threshold temperature.
FPF2123-FPF2125 Rev. F
9
www.fairchildsemi.com
相关PDF资料 |
PDF描述 |
|---|---|
| FPF2164 | IC LOAD SWITCH ADJ CURR 6-MLP |
| FPF2165R | IC LOAD SW FULL FUNCT ADJ 6MLP |
| FPF2172 | IC LOAD MANAGEMENT ADV POWER33-6 |
| FPF2174 | IC LOAD SWITCH ADVANCED 6MLP 3X3 |
| FPF2194 | IC LOAD SWITCH FULL FUNCT 6WLCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FPF2125 | 功能描述:功率驱动器IC ADV LOAD MANAGEMENT RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| FPF2140 | 功能描述:电源开关 IC - 配电 Full Function Load Switch RoHS:否 制造商:Exar 输出端数量:1 开启电阻（最大值）:85 mOhms 开启时间（最大值）:400 us 关闭时间（最大值）:20 us 工作电源电压:3.2 V to 6.5 V 电源电流（最大值）: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-5 |
| FPF2140_ABB3086B WAF | 制造商:Fairchild Semiconductor Corporation 功能描述: |
| FPF2140_ABB3086D WAF | 制造商:Fairchild Semiconductor Corporation 功能描述: |
| FPF2142 | 功能描述:电源开关 IC - 配电 Full Function Load Switch RoHS:否 制造商:Exar 输出端数量:1 开启电阻（最大值）:85 mOhms 开启时间（最大值）:400 us 关闭时间（最大值）:20 us 工作电源电压:3.2 V to 6.5 V 电源电流（最大值）: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-5 |
发布紧急采购，3分钟左右您将得到回复。