- 您现在的位置：买卖IC网 > PDF目录3928 > FT24C02A-UNR-T (Fremont Micro Devices USA)IC EEPROM 2KBIT 1MHZ 8DFN PDF资料下载
参数资料
| 型号： | FT24C02A-UNR-T |
| 厂商： | Fremont Micro Devices USA |
| 文件页数： | 7/20页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 2KBIT 1MHZ 8DFN |
| 标准包装： | 1 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 2K (256 x 8) |
| 速度： | 400kHz，1MHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.8 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-WFDFN 裸露焊盘 |
| 供应商设备封装： | 8-DFN（2x3） |
| 包装： | 标准包装 |
| 其它名称： | 1219-1127-6 |
FT24C02A
words are loaded, the 17 th data word will be loaded to the 1 st data word column address. The 18 th
data word will be loaded to the 2 nd data word column address and so on. In other word, data word
address (column address) will “roll” over the previously loaded data.
(C) ACKNOWLEDGE POLLING
ACKNOWLEDGE polling may be used to poll the programming status during a self-timed internal
programming. By issuing a valid read or write address command, the EEPROM will not acknowledge
at the 9 th clock cycle if the device is still in the self-timed programming mode. However, if the
programming completes and the chip has returned to the STANDBY mode, the device will return a
valid ACKNOWLEDGE signal at the 9 th clock cycle.
READ OPERATIONS
The read command is similar to the write command except the 8 th read/write bit in address word is set to “1”.
The three read operation modes are described as follows:
(A) CURRENT ADDRESS READ
The EEPROM internal address word counter maintains the last read or write address plus one if the
power supply to the device has not been cut off. To initiate a current address read operation, the
micro-controller issues a START bit and a valid device address word with the read/write bit (8 th ) set to
“1”. The EEPROM will response with an ACKNOWLEDGE signal on the 9 th serial clock cycle. An 8-
bit data word will then be serially clocked out. The internal address word counter will then
automatically increase by one. For current address read the micro-controller will not issue an
ACKNOWLEDGE signal on the 18 th clock cycle. The micro-controller issues a valid STOP bit after
the 18 th clock cycle to terminate the read operation. The device then returns to STANDBY mode.
(B) SEQUENTIAL READ
The sequential read is very similar to current address read. The micro-controller issues a START bit
and a valid device address word with read/write bit (8 th ) set to “1”. The EEPROM will response with
an ACKNOWLEDGE signal on the 9 th serial clock cycle. An 8-bit data word will then be serially
clocked out. Meanwhile the internally address word counter will then automatically increase by one.
Unlike current address read, the micro-controller sends an ACKNOWLEDGE signal on the 18 th clock
cycle signaling the EEPROM device that it wants another byte of data. Upon receiving the
ACKNOWLEDGE signal, the EEPROM will serially clocked out an 8-bit data word based on the
incremented internal address counter. If the micro-controller needs another data, it sends out an
ACKNOWLEDGE signal on the 27 th clock cycle. Another 8-bit data word will then be serially clocked
out. This sequential read continues as long as the micro-controller sends an ACKNOWLEDGE signal
after receiving a new data word. When the internal address counter reaches its maximum valid
address, it rolls over to the beginning of the memory array address. Similar to current address read,
the micro-controller can terminate the sequential read by not acknowledging the last data word
received, but sending a STOP bit afterwards instead.
? 2009 Fremont Micro Devices Inc.
DS3011B-page 7
相关PDF资料 |
PDF描述 |
|---|---|
| AYF332365 | CONN FPC 23POS SMD Y3BW |
| AT90USB647-AU | IC AVR MCU 64K 64TQFP |
| 395-024-541-204 | CARD EDGE 24POS DL .100X.200 BLK |
| 395-024-541-202 | CARD EDGE 24POS DL .100X.200 BLK |
| 395-024-541-201 | CARD EDGE 24POS DL .100X.200 BLK |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FT24C02A-USG-B | 功能描述:IC EEPROM 2KBIT 1MHZ 8SOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:96 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽） 供应商设备封装:48-TSOP 包装:托盘 |
| FT24C02A-USG-T | 功能描述:IC EEPROM 2KBIT 1MHZ 8SOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:96 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽） 供应商设备封装:48-TSOP 包装:托盘 |
| FT24C02A-USR-B | 功能描述:IC EEPROM 2KBIT 1MHZ 8SOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:96 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽） 供应商设备封装:48-TSOP 包装:托盘 |
| FT24C02A-USR-T | 功能描述:IC EEPROM 2KBIT 1MHZ 8SOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:96 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽） 供应商设备封装:48-TSOP 包装:托盘 |
| FT24C02A-UTG-B | 功能描述:IC EEPROM 2KBIT 1MHZ 8TSSOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:96 系列:- 格式 - 存储器:闪存 存储器类型:FLASH 存储容量:1M (64K x 16) 速度:150ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:48-TFSOP（0.724"，18.40mm 宽） 供应商设备封装:48-TSOP 包装:托盘 |
发布紧急采购，3分钟左右您将得到回复。