- 您现在的位置：买卖IC网 > PDF目录11820 > FT4232HL-TRAY (FTDI, Future Technology Devices International Ltd)IC USB HS QUAD UART/SYNC 64-LQFP PDF资料下载
参数资料
| 型号： | FT4232HL-TRAY |
| 厂商： | FTDI, Future Technology Devices International Ltd |
| 文件页数： | 7/45页 |
| 文件大小： | 0K |
| 描述： | IC USB HS QUAD UART/SYNC 64-LQFP |
| 标准包装： | 160 |
| 系列： | USBmadeEZ-FIFO |
| 特点： | USB 至 UART 和（或）SPI、I2C、JTAG |
| 通道数： | 4，QUART |
| FIFO's： | 2048 字节 |
| 规程： | RS232，RS422，RS485 |
| 电源电压： | 3 V ~ 3.6 V |
| 带自动流量控制功能： | 是 |
| 带调制解调器控制功能： | 是 |
| 带CMOS： | 是 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-LQFP |
| 供应商设备封装： | 64-LQFP（10x10） |
| 包装： | 托盘 |
| 配用： | 768-1031-ND - MOD USB HS FT4232H EVAL |
| 其它名称： | FT4232HL - TRAY |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页
Copyright 2010 Future Technology Devices International Limited
15
Document No.: FT_000060
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet Version 2.2
Clearance No.: FTDI#78
4 Function Description
The FT4232H is FTDI’s 5th generation of USB devices. The FT4232H is a USB 2.0 High Speed (480Mb/s)
to UART/MPSSE ICs. It has the capability of being configured in a variety of industry standard serial
interfaces.
The FT4232H has four independent configurable interfaces. Two of these interfaces can be configured as
UART, JTAG, SPI, I2C or bit-bang mode, using an MPSSE, with independent baud rate generators. The
remaining two interfaces can be configured as UART or bit-bang.
4.1 Key Features
USB High Speed to Quad Interface. The FT4232H is a USB 2.0 High Speed (480Mbits/s) to quad
flexible/configurable serial interfaces.
Functional Integration. The FT4232H integrates a USB protocol engine which controls the physical
Universal Transceiver Macrocell Interface (UTMI) and handles all aspects of the USB 2.0 High Speed
interface. The FT4232H includes an integrated +1.8V Low Drop-Out (LDO) regulator and 12MHz to
480MHz PLL. It also includes 2kbytes Tx and Rx data buffers per channel. The FT4232H effectively
integrates the entire USB protocol on a chip.
MPSSE.Multi-Purpose Synchronous Serial Engines (MPSSE), capable of speeds up to 30 Mbits/s, provides
flexible synchronous interface configurations.
Data Transfer rate. The FT4232H supports a data transfer rate up to 12 Mbit/s when configured as an
RS232/RS422/RS485 UART interface. Please note the FT4232H does not support the baud rates of 7
Mbaud 9 Mbaud, 10 Mbaud and 11 Mbaud.
Latency Timer. This is really a feature of the driver and is used to as a timeout to flush short packets of
data back to the PC. The default is 16ms, but it can be altered between 0ms and 256ms. At 0ms latency
you get a packet transfer on every high speed microframe.
4.2 Functional Block Descriptions
Quad Multi-Purpose UART/MPSSE Controllers. The FT4232H has four independent UART/MPSSE
Controllers. These blocks control the UART data or control the Bit-Bang mode if selected by the SETUP
command. The blocks used on channel A and channel B also contain a MPSSE (Multi Protocol
Synchronous Serial Engine) in each of them which can be used independently of each other and the
remaining UART channels. Using this it can be configured under software command to have 1 MPSSE + 3
UARTS (each UART can be set to Bit Bang mode to gain extra I/O if required) or 2 MPSSE + 2 UARTS.
USB Protocol Engine and FIFO control. The USB Protocol Engine controls and manages the interface
between the UTMI PHY and the FIFOs of the chip. It also handles power management and the USB
protocol specification.
Dual Port FIFO TX Buffer (2Kbytes per channel). Data from the Host PC is stored in these buffers to
be used by the Multi-purpose UART/FIFO controllers. This is controlled by the USB Protocol Engine and
FIFO control block.
Dual Port FIFO RX Buffer (2Kbytes per channel). Data from the Multi-purpose UART/FIFO controllers
is stored in these blocks to be sent back to the Host PC when requested. This is controlled by the USB
Protocol Engine and FIFO control block.
RESET Generator - The integrated Reset Generator Cell provides a reliable power-on reset to the device
internal circuitry at power up. The RESET# input pin allows an external device to reset the FT4232H.
RESET# should be tied to VCCIO (+3.3v) if not being used.
Independent Baud Rate Generators - The Baud Rate Generators provides a x16 or a x10 clock input
to the UART’s from a 120MHz reference clock and consists of a 14 bit pre-scaler and 4 register bits which
provide fine tuning of the baud rate (used to divide by a number plus a fraction). This determines the
Baud Rate of the UART which is programmable from 183 baud to 12 million baud. The FT2232H does not
support the baud rates of 7 Mbaud 9 Mbaud, 10 Mbaud and 11 Mbaud.
See FTDI application note AN232B-05 on the FTDI website (www.ftdichip.com) for more details.
相关PDF资料 |
PDF描述 |
|---|---|
| MS27484T12B98PA | CONN PLUG 10POS STRAIGHT W/PINS |
| SC16C654DBIB64,157 | IC QUAD UART 64BYTE 64LQFP |
| VI-B6D-IY | CONVERTER MOD DC/DC 85V 50W |
| SCC2692AE1B44,528 | IC UART DUAL W/FIFO 44PLCC |
| SC16C654BIEC,557 | IC QUAD UART 64BYTE 64LFBGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FT4232HMINIMODULE | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB to serial/FIFO development module 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB Hi-Speed FT4232H Evaluation Module |
| FT4232H-MINI-MODULE | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:IC,FT4323H EVALUATION MODULE;USB HI-SPEED |
| FT4232HQ | 制造商:Future Technology Devices International (FTDI Chip) 功能描述:USB Hi-Speed to Quad Channel Serial UART/JTAG/SPI/I2C IC - QFN-64 |
| FT4232HQ_MINI_MODULE | 功能描述:界面开发工具 USB Hi-Speed FT4323H Evaluation Module RoHS:否 制造商:Bourns 产品:Evaluation Boards 类型:RS-485 工具用于评估:ADM3485E 接口类型:RS-485 工作电源电压:3.3 V |
| FT4232HQ-4000 | 制造商:FTDI 制造商全称:FTDI 功能描述:QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC |
发布紧急采购，3分钟左右您将得到回复。