参数资料
型号: FT4232HQ-REEL
厂商: FTDI, Future Technology Devices International Ltd
文件页数: 11/45页
文件大小: 0K
描述: IC USB HS QUAD UART/SYNC 64-QFN
标准包装: 1
系列: USBmadeEZ-FIFO
特点: USB 至 UART 和(或)SPI、I2C、JTAG
通道数: 4,QUART
FIFO's: 2048 字节
规程: RS232,RS422,RS485
电源电压: 3 V ~ 3.6 V
带自动流量控制功能:
带调制解调器控制功能:
带CMOS:
安装类型: 表面贴装
封装/外壳: 64-VFQFN 裸露焊盘
供应商设备封装: 64-QFN 裸露焊盘(9x9)
包装: 标准包装
产品目录页面: 634 (CN2011-ZH PDF)
配用: 768-1031-ND - MOD USB HS FT4232H EVAL
其它名称: 768-1027-6
Copyright 2010 Future Technology Devices International Limited
19
Document No.: FT_000060
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet Version 2.2
Clearance No.: FTDI#78
4.3.3 RS485 Configuration
Figure 4.3 illustrates how the FT4232H can be configured as a dual RS485 interface. The FT4232H can
have all 4 channels connected as RS485, but only channel A and channel C are shown for clarity.
Figure 4.3 Dual RS485 Configuration
In this case both channel A and channel C are configured as RS485 operating at TTL levels and a level
converter device (half duplex RS485 transceiver) is used to convert the TTL level signals from the
FT232H to RS485 levels. It has separate enables on both the transmitter and receiver. With RS485, the
transmitter is only enabled when a character is being transmitted from the UART. The TXDEN pins on the
FT4232H are provided for exactly that purpose, and so the transmitter enables are wired to the TXDEN s.
The receiver enable is active low, so it is wired to the PWREN# pin to disable the receiver when in USB
suspend mode.
RS485 is a multi-drop network – i.e. many devices can communicate with each other over a single two
wire cable connection. The RS485 cable requires to be terminated at each end of the cable. Links are
provided to allow the cable to be terminated if the device is physically positioned at either end of the
cable.
In this example the data transmitted by the FT4232H is also received by the device that is transmitting.
This is a common feature of RS485 and requires the application software to remove the transmitted data
from the received data stream. With the FT4232H it is possible to do this entirely in hardware – simply
modify the schematic so that RXD of the FT4232H is the logical OR of the level converter device receiver
output with TXDEN using an HC32 or similar logic gate
相关PDF资料
PDF描述
FUSB1500MHX IC USB 2.0 TRANSCEIVER 16-MLP
FUSB2805MLX TXRX USB2.0 HS OTG ULPI 32MLP
FXLA2203UMX TRANSLATOR LEVEL DUAL 24UMLP
GAL16V8D-15LJN SPLD 62.5MHZ EECMOS 20 PLCC
GAL18V10B-20LP IC GAL 10OUT MACROCELL 7.5NS 20
相关代理商/技术参数
参数描述
FT4232HQ-TRAY 功能描述:USB 接口集成电路 USB HS to Quad UART/ SPI/JTAG/I2C QFN-64 RoHS:否 制造商:Cypress Semiconductor 产品:USB 2.0 数据速率: 接口类型:SPI 工作电源电压:3.15 V to 3.45 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:WLCSP-20
FT-42-3T 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THRUBEAM R4 BEND RADIUS 制造商:Panasonic Electric Works 功能描述:Fiber, M4, Thru-beam, 3M Free cut, R4 Bend radius
FT-42S 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THREADED THRUBEAM R4 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.13M; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:1.13m; Sensing Range:0m to 1.13m
FT-42W 制造商:PANASONIC INDUSTRIAL AUTOMATION SALES 功能描述:FIBER M4 THREADED THRUBEAM R1 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 800MM; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:800mm; Sensing Range:0mm to 800mm
FT-43 制造商:PANASONIC ELECTRIC WORKS ACSD 功能描述:Sensor, M4 Threaded Thru Beam, R4, 2m Cable 制造商:Panasonic Electric Works 功能描述:SENSOR FIBRE OPTIC THRUBEAM 1.4M 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.4M 制造商:Panasonic Electric Works 功能描述:SENSOR, FIBRE OPTIC, THRUBEAM, 1.4M; Fiber Optic Sensor Type:Thrubeam; Sensing Range Max:1.4m; Sensing Range:0m to 1.4m