参数资料
型号: FTLF1424P2BCL
厂商: Finisar Corporation
文件页数: 6/11页
文件大小: 0K
描述: TXRX OPT SFP 4 GB/S 1310NM
标准包装: 1
数据速率: 4.25Gbps
波长: 1310nm
应用: 以太网
电源电压: 3 V ~ 3.6 V
连接器类型: LC 双工
安装类型: SFP
产品目录页面: 326 (CN2011-ZH PDF)
其它名称: 775-1026
FTLF1424P2xCL and FTLF1424P2xCV SFP Product Specification – December 2006
Finisar
VIII. Digital Diagnostic Functions
Finisar FTLF1424P2xCL and FTLF1424P2xCV SFP transceivers support the 2-wire
serial communication protocol as defined in the SFP MSA 1 . It is very closely related to
the E 2 PROM defined in the GBIC standard, with the same electrical specifications.
The standard SFP serial ID provides access to identification information that describes
the transceiver’s capabilities, standard interfaces, manufacturer, and other information.
Additionally, Finisar SFP transceivers provide a unique enhanced digital diagnostic
monitoring interface, which allows real-time access to device operating parameters such
as transceiver temperature, laser bias current, transmitted optical power, received optical
power and transceiver supply voltage. It also defines a sophisticated system of alarm and
warning flags, which alerts end-users when particular operating parameters are outside of
a factory set normal range.
The SFP MSA defines a 256-byte memory map in E 2 PROM that is accessible over a
2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic
monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally
defined serial ID memory map remains unchanged. The interface is identical to, and is
thus fully backward compatible with both the GBIC Specification and the SFP Multi
Source Agreement. The complete interface is described in Finisar Application Note AN-
2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through a 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the
SFP transceiver into those segments of the E 2 PROM that are not write-protected. The
negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod
Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with
SCL to mark the start and end of serial protocol activation. The memories are organized
as a series of 8-bit data words that can be addressed individually or sequentially.
For more information, please see the SFP MSA documentation 1,5 or Finisar Application
Note AN-2030.
FTLF1424P2xCL and FTLF1424P2xCV transceivers can be used in host systems that
require either internally or externally calibrated digital diagnostics.
Please note that evaluation board FDB-1018 is available with Finisar ModDEMO
software that allows simple to use communication over the 2-wire serial interface.
? Finisar Corporation December 18, 2006 Rev A Page 6
相关PDF资料
PDF描述
FTLX1413D3BCL XFP OPTICAL TRANSCEIVER 10GB/S
OPF512 RECEIVR FIBR OPTIC 200KBPS TO-18
PSE541-R04 SENSOR VACUUM 101KPA 4MM REDUC
FTLX1671D3BCL TXRX 1550NM 10.3GB/S 3.3V
FTL410QE1C QSFP TXRX 42 GB/S 850NM
相关代理商/技术参数
参数描述
FTLF1424P2BCR 功能描述:TXRX OPT SFP 4 GB/S 1310NM RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:- 标准包装:20 系列:*
FTLF1424P2BCV 功能描述:TXRX OPT SFP 4 GB/S 1310NM RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:- 标准包装:20 系列:*
FTLF1424P2BTD 功能描述:光纤发射器、接收器、收发器 GigE 1x/2x/4x FC4.25 Gb/s trnscvr 10km RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压:
FTLF1424P2BTR 功能描述:光纤发射器、接收器、收发器 1x/2x/4x FC4.25 Gb/s transceiver, 10km RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压:
FTLF1424P2WCD 制造商:FINISAR 制造商全称:FINISAR 功能描述:4 Gigabit RoHS Compliant Long-Wavelength SFP Transceiver