参数资料
型号: FTLF1621P2BCL
厂商: Finisar Corporation
文件页数: 6/11页
文件大小: 0K
描述: TXRX OPT SFP 2 GB/S 1550NM
标准包装: 1
数据速率: 2.67Gbps
波长: 1550nm
应用: 以太网
电源电压: 3.1 V ~ 3.5 V
连接器类型: LC 双工
安装类型: SFP
其它名称: 775-1034
FTLF1621P2xCL Pluggable SFP Product Specification – September 2007
VIII. Digital Diagnostic Functions
Finisar FTLF1621P2xCL SFP transceivers support the 2-wire serial communication
protocol as defined in the SFP MSA 1 . It is very closely related to the E 2 PROM defined in
the GBIC standard, with the same electrical specifications.
The standard SFP serial ID provides access to identification information that describes
the transceiver’s capabilities, standard interfaces, manufacturer, and other information.
Additionally, Finisar SFP transceivers provide a unique enhanced digital diagnostic
monitoring interface, which allows real-time access to device operating parameters such
as transceiver temperature, laser bias current, transmitted optical power, received optical
power and transceiver supply voltage. It also defines a sophisticated system of alarm and
warning flags, which alerts end-users when particular operating parameters are outside of
a factory set normal range.
The SFP MSA defines a 256-byte memory map in E 2 PROM that is accessible over a
2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic
monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally
defined serial ID memory map remains unchanged. The interface is identical to, and is
thus fully backward compatible with both the GBIC Specification and the SFP Multi
Source Agreement. The complete interface is described in Finisar Application Note AN-
2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through a 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the
SFP transceiver into those segments of the E 2 PROM that are not write-protected. The
negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod
Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with
SCL to mark the start and end of serial protocol activation. The memories are organized
as a series of 8-bit data words that can be addressed individually or sequentially.
For more information, please see the SFP MSA documentation 1 or Finisar Application
Note AN-2030.
Digital diagnostics for the FTLF1621P2xCL are externally calibrated by default.
Please note that evaluation board FDB-1018 is available with Finisar ModDEMO
software that allows simple to use communication over the 2-wire serial interface.
? Finisar Corporation September 12, 2007 Rev.B
Page 6
相关PDF资料
PDF描述
FTLF1721P1BCL TXRX SFP 2.67GB/S 3.3V 1310NM
FTLF1721P2BCL TXRX OPT SFP 2 GB/S 1310NM
FTLF8519F2GCL TXRX OPT SFF 2 GB/S 850NM
FTLF8519F2GNL TXRX OPT SFF 2 GB/S 850NM
FTLF8519F2GTL TXRX OPT SFF 2 GB/S 850NM
相关代理商/技术参数
参数描述
FTLF1621P2BTL 制造商:FINISAR 制造商全称:FINISAR 功能描述:OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver
FTLF1621P2WCL 制造商:FINISAR 制造商全称:FINISAR 功能描述:OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver
FTLF1621P2WTL 制造商:FINISAR 制造商全称:FINISAR 功能描述:OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver
FTLF1621S1GCL 制造商:Finisar Corporation 功能描述:TX/RX Optical Fiber 2667Mbps 20-Pin SFF 制造商:Finisar Corporation 功能描述:SAME AS FTLF1621S1MCL, BUT 2 GROUND PINS - Trays 制造商:Finisar Corporation 功能描述:TXRX 1550NM APD 1X/2X 2X10 SFF
FTLF1621S1HCL 制造商:Finisar Corporation 功能描述:TX/RX OPTICAL FIBER 2667MBPS - Trays 制造商:Finisar Corporation 功能描述:TXRX 1550NM APD 1X/2X 2X10 SFF