参数资料
型号: FTLF8519P2BNL
厂商: JDS UNIPHASE CORP
元件分类: 光收发
英文描述: FIBER OPTIC TRANSCEIVER, 830-860nm, 2125Mbps(Tx), 2125Mbps(Rx), SURFACE MOUNT, LC CONNECTOR
封装: ROHS COMPLIANT PACKAGE
文件页数: 9/12页
文件大小: 804K
代理商: FTLF8519P2BNL
FTLF8519P2xNL Pluggable SFP Product Specification – September 2005
Finisar Corporation September 25, 2005 Rev. J
Page 6
VIII. Digital Diagnostic Functions
Finisar FTLF8519P2xNL SFP transceivers support the 2-wire serial communication
protocol as defined in the SFP MSA1. It is very closely related to the E2PROM defined in
the GBIC standard, with the same electrical specifications.
The standard SFP serial ID provides access to identification information that describes
the transceiver’s capabilities, standard interfaces, manufacturer, and other information.
Additionally, Finisar SFP transceivers provide a unique enhanced digital diagnostic
monitoring interface, which allows real-time access to device operating parameters such
as transceiver temperature, laser bias current, transmitted optical power, received optical
power and transceiver supply voltage. It also defines a sophisticated system of alarm and
warning flags, which alerts end-users when particular operating parameters are outside of
a factory set normal range.
The SFP MSA defines a 256-byte memory map in E2PROM that is accessible over a
2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic
monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally
defined serial ID memory map remains unchanged. The interface is identical to, and is
thus fully backward compatible with both the GBIC Specification and the SFP Multi
Source Agreement. The complete interface is described in Finisar Application Note AN-
2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through a 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the
SFP transceiver into those segments of the E2PROM that are not write-protected. The
negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod
Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with
SCL to mark the start and end of serial protocol activation. The memories are organized
as a series of 8-bit data words that can be addressed individually or sequentially.
For more information, please see the SFP MSA documentation1,5 or Finisar Application
Note AN-2030.
Please note that evaluation board FDB-1018 is available with Finisar ModDEMO
software that allows simple to use communication over the 2-wire serial interface.
相关PDF资料
PDF描述
FTLF8524P2BNL FIBER OPTIC TRANSCEIVER, 830-860nm, 4250Mbps(Tx), 4250Mbps(Rx), PANEL MOUNT, LC CONNECTOR
FTLF8524P2BNV FIBER OPTIC TRANSCEIVER, 830-860nm, 4250Mbps(Tx), 4250Mbps(Rx), PANEL MOUNT, LC CONNECTOR
FTLF8524P2WNL FIBER OPTIC TRANSCEIVER, 830-860nm, 4250Mbps(Tx), 4250Mbps(Rx), PANEL MOUNT, LC CONNECTOR
FTLF8524P2WNV FIBER OPTIC TRANSCEIVER, 830-860nm, 4250Mbps(Tx), 4250Mbps(Rx), PANEL MOUNT, LC CONNECTOR
FTLF8528P2BCV FIBER OPTIC TRANSCEIVER, 830-860nm, 8500Mbps(Tx), 8500Mbps(Rx), BOARD/PANEL MOUNT, LC CONNECTOR
相关代理商/技术参数
参数描述
FTLF8519P2BNL-A5 制造商:Finisar Corporation 功能描述:
FTLF8519P2BNL-NT 制造商:Nortel 功能描述:FIBER OPTIC TRANSCEIVER, 830-860NM, 2125MBPS(TX), 2125MBPS(RX), PANEL MOUNT, LC CONNECTOR
FTLF8519P2BTL 功能描述:TXRX OPT SFP 2 GB/S 850NM RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:- 标准包装:20 系列:*
FTLF8519P2WCL 制造商:FINISAR 制造商全称:FINISAR 功能描述:2.125 Gb/s RoHS Compliant Short-Wavelength SFP Transceiver
FTLF8519P2WNL 制造商:FINISAR 制造商全称:FINISAR 功能描述:2.125 Gb/s RoHS Compliant Short-Wavelength SFP Transceiver