参数资料
型号: FTLF8519P2WTL
元件分类: 光收发
英文描述: FIBER OPTIC TRANSCEIVER, 830-860nm, 2125Mbps(Tx), 2125Mbps(Rx), PANEL MOUNT, LC CONNECTOR
封装: ROHS COMPLIANT PACKAGE
文件页数: 9/12页
文件大小: 677K
代理商: FTLF8519P2WTL
FTLF8519P2xTL Pluggable SFP Product Specification – June 2009
Finisar Corporation June 25, 2006 Rev. D
Page 6
VIII. Digital Diagnostic Functions
Finisar FTLF8519P2xTL SFP transceivers support the 2-wire serial communication
protocol as defined in the SFP MSA
1. It is very closely related to the E2PROM defined in
the GBIC standard, with the same electrical specifications.
The standard SFP serial ID provides access to identification information that describes
the transceiver’s capabilities, standard interfaces, manufacturer, and other information.
Additionally, Finisar SFP transceivers provide a unique enhanced digital diagnostic
monitoring interface, which allows real-time access to device operating parameters such
as transceiver temperature, laser bias current, transmitted optical power, received optical
power and transceiver supply voltage. It also defines a sophisticated system of alarm and
warning flags, which alerts end-users when particular operating parameters are outside of
a factory set normal range.
The SFP MSA defines a 256-byte memory map in E
2PROM that is accessible over a
2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic
monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally
defined serial ID memory map remains unchanged. The interface is identical to, and is
thus fully backward compatible with both the GBIC Specification and the SFP Multi
Source Agreement. The complete interface is described in Finisar Application Note AN-
2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through a 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the
SFP transceiver into those segments of the E
2PROM that are not write-protected. The
negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod
Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with
SCL to mark the start and end of serial protocol activation. The memories are organized
as a series of 8-bit data words that can be addressed individually or sequentially.
For more information, please see the SFP MSA documentation
1,5 or Finisar Application
Note AN-2030.
Please note that evaluation board FDB-1018 is available with Finisar ModDEMO
software that allows simple to use communication over the 2-wire serial interface.
相关PDF资料
PDF描述
FO4663R-C3FC-300 FIBER OPTIC SWITCH, 820-1380nm, 2X2PORT, FC CONNECTOR
FO4663R-C5SC-300 FIBER OPTIC SWITCH, 820-1380nm, 2X2PORT, SC CONNECTOR
FWSF-OADM-1-61 FIBER OPTIC WAVELENGTH DIVISION MUX/DEMUX, SC CONNECTOR
FAM-50X3S-T65 FIBER OPTIC TRANSCEIVER, TRANSPONDER, 1530-1565nm, 10312.5Mbps(Tx), 10312.5Mbps(Rx), PANEL MOUNT, SC CONNECTOR
FAM-50X4S-T80H FIBER OPTIC TRANSCEIVER, TRANSPONDER, 1530-1565nm, 10644Mbps(Tx), 10644Mbps(Rx), PANEL MOUNT, SC CONNECTOR
相关代理商/技术参数
参数描述
FTLF8519P3BNL 功能描述:TXRX SFP 2.125GB/S 3.3V RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:* 标准包装:20 系列:*
FTLF8519P3BTL 功能描述:光纤发射器、接收器、收发器 GigE 1x/2x FC, 2.129 Gb/s trnscvr, 550m RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压:
FTLF8519P3BYL 制造商:FINISAR 制造商全称:FINISAR 功能描述:2.125 Gb/s RoHS Compliant Short-Wavelength SFP Transceiver
FTLF8519P3XNL 制造商:FRONTIER 制造商全称:Frontier Electronics. 功能描述:Product Guide
FTLF8519P3XTL 制造商:FRONTIER 制造商全称:Frontier Electronics. 功能描述:Product Guide