- 您现在的位置：买卖IC网 > Datasheet目录436 > FTLX1341E2 (Finisar Corporation)TXRX OPT SFP+ 10 GB/S 220M Datasheet资料下载
参数资料
| 型号： | FTLX1341E2 |
| 厂商： | Finisar Corporation |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | TXRX OPT SFP+ 10 GB/S 220M |
| 标准包装： | 2 |
| 系列： | * |
| 其它名称： | Q7095101 |
FTLX1341E2 Product Specification – October 2008
Environmental Performance
Operating case temperature:
Operating humidity:
0°C to +70°C
0% -95% RH non-condensing
Fibers and Connectors
The transponder has SC receptacles for both Tx and Rx. The transponder is designed for multimode
SC cables, 0° polished endface (PC).
70-pin Connector
The module interface connector is a 70-pin, printed circuit board edge connection with a 0.5 mm
pitch. The appropriate mating connector for the customer PCB is a 70-pin SMT, dual row, right
angled, edge connector, 0.5 mm pitch (Tyco Electronics part number 1367337-1, Molex part number
74441-0003 or equivalent).
Rail Requirement
The X2 rail system required to mount the X2 module is fully defined by the MSA.
(Tyco Electronics part number 1367608-1: designed for belly to belly applications;
and 1367610-1, designed for single sided board mount to fit into the standard host PCB
footprint; or equivalent). For further details please refer to vendor-supplied information.
Aqueous Wash
Finisar X2 transponders are neither solderable nor aqueous washable and are not
intended for these processes.
VI. Regulatory Compliance
Feature
ESD:
Electrostatic Discharge to the
Electrical Pins (HBM)
Immunity:
Against Electrostatic Discharge
(ESD) to the Module Receptacle
Immunity:
Against Radio Frequency
Electromagnetic Field
Emission:
Electromagnetic Interference
(EMI)
? Finisar Corporation – October 2008
Standard
EIA/JESD22-A114-B
(MIL-STD 883D
Method 3015.7)
EN 61000-4-2
IEC 61000-4-2
EN 61000-4-3
IEC 61000-4-3
FCC 47 CFR
Part 15, Class B
EN 55022 Class B
CISPR 22
Rev B
Comments
Class 1a (> 500 V)
Discharges ranging from ± 2 kV to ± 25 kV to the
front end / faceplate / receptacle cause no damage
to module (under recommended conditions).
With field strength of 10 V/m, noise frequency
ranges from 10 MHz to 2 GHz. No effect on
module performance between the specification
limits.
Noise frequency range:
30 MHz to 40 GHz
Radiated emission does not exceed specified
limits when measured with module inside a
shielding enclosure with a MSA conforming
cutout.
Page 8
相关PDF资料 |
PDF描述 |
|---|---|
| FTLX1371D3BCL | TXRX OPT SFP+ 10 GB/S 220M |
| FTLX1412D3BCL | TXRX OPT XFP 10 GB/S 1310NM |
| FTLX1412M3BCL | TXRX OPT XFP 10 GB/S 1310NM |
| FTLX1441E2 | TXRX OPT X2 10 GB/S 1310NM |
| FTLX1471D3BCL | TXRX SFP+ SGL 10GB/S 1310NM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FTLX1370W3BTL | 功能描述:Fiber Optic Transceiver Module Wireless 9.83Gbps 1310nm 3.3V LC Duplex Pluggable, SFP+ 制造商:finisar corporation 系列:- 零件状态:有效 数据速率:9.83Gbps 波长:1310nm 应用:无线 电压 - 电源:3.3V 连接器类型:LC 双工 安装类型:可插入式，SFP+ 标准包装:1 |
| FTLX1370W4BTL | 功能描述:TXRX 1310NM 10GB SFP+ LC 制造商:finisar corporation 系列:- 零件状态:在售 数据速率:10Gbps 波长:1310nm 应用:以太网，光纤通道 电压 - 电源:3.3V 连接器类型:LC 双工 安装类型:可插入式，SFP+ 标准包装:1 |
| FTLX1371D3BCL | 功能描述:TXRX OPT SFP+ 10 GB/S 220M RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:* 标准包装:20 系列:* |
| FTLX1374D3BCL | 功能描述:Fiber Optic Transceiver Module Ethernet Network 10.3Gbps 1308nm 3.3V LC Duplex Pluggable, SFP+ 制造商:finisar corporation 系列:- 零件状态:有效 数据速率:10.3Gbps 波长:1308nm 应用:以太网络 电压 - 电源:3.3V 连接器类型:LC 双工 安装类型:可插入式，SFP+ 标准包装:1 |
| FTLX1412D3BCL | 功能描述:TXRX OPT XFP 10 GB/S 1310NM RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:- 标准包装:20 系列:* |
发布紧急采购，3分钟左右您将得到回复。