- 您现在的位置：买卖IC网 > Datasheet目录436 > FTLX1412D3BCL (Finisar Corporation)TXRX OPT XFP 10 GB/S 1310NM Datasheet资料下载
参数资料
| 型号： | FTLX1412D3BCL |
| 厂商： | Finisar Corporation |
| 文件页数： | 7/11页 |
| 文件大小： | 0K |
| 描述： | TXRX OPT XFP 10 GB/S 1310NM |
| 标准包装： | 1 |
| 数据速率： | 10.5Gbps |
| 波长： | 1310nm |
| 应用： | 以太网 |
| 电源电压： | 3.13 V ~ 3.45 V |
| 连接器类型： | LC 双工 |
| 安装类型： | XFP |
| 产品目录页面： | 326 (CN2011-ZH PDF) |
| 其它名称： | 775-1047 |
FTLX1412D3BCL Datacom XFP Product Specification – September 2007
Finisar
VIII. Digital Diagnostic Functions
As defined by the XFP MSA 1 , Finisar XFP transceivers provide digital diagnostic
functions via a 2-wire serial interface, which allows real-time access to the following
operating parameters:
?
?
?
?
?
Transceiver temperature
Laser bias current
Transmitted optical power
Received optical power
Transceiver supply voltage
It also provides a sophisticated system of alarm and warning flags, which may be used to
alert end-users when particular operating parameters are outside of a factory-set normal
range.
The operating and diagnostics information is monitored and reported by a Digital
Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed
through the 2-wire serial interface. When the serial protocol is activated, the serial clock
signal (SCL pin) is generated by the host. The positive edge clocks data into the XFP
transceiver into those segments of its memory map that are not write-protected. The
negative edge clocks data from the XFP transceiver. The serial data signal (SDA pin) is
bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to
mark the start and end of serial protocol activation. The memories are organized as a
series of 8-bit data words that can be addressed individually or sequentially. The 2-wire
serial interface provides sequential or random access to the 8 bit parameters, addressed
from 000h to the maximum address of the memory.
For more detailed information including memory map definitions, please see Finisar
Application Note AN-2035 “Digital Diagnostic Monitoring Interface for XFP Optical
Transceivers”, or the XFP MSA Specification 1 .
? Finisar Corporation 14-September-07
Rev B
Page 7
相关PDF资料 |
PDF描述 |
|---|---|
| FTLX1412M3BCL | TXRX OPT XFP 10 GB/S 1310NM |
| FTLX1441E2 | TXRX OPT X2 10 GB/S 1310NM |
| FTLX1471D3BCL | TXRX SFP+ SGL 10GB/S 1310NM |
| FTLX1612M3BCL | 40K XFP OPTICAL TRANSCEIVER |
| FTLX1811M3 | TXRX OPT XFP 10 GB/S 1550NM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FTLX1412D3BTL | 功能描述:光纤发射器、接收器、收发器 PIN 10GBASE-LR/LW 1200SM-LL-L 10.5Gb/s RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压: |
| FTLX1412D3QCL | 制造商:Finisar Corporation 功能描述:SAME AS FTLX1412D3BCL, BUT NO BAIL - Trays |
| FTLX1412M3BCL | 功能描述:TXRX OPT XFP 10 GB/S 1310NM RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:- 标准包装:20 系列:* |
| FTLX1412M3BNL | 制造商:Finisar Corporation 功能描述:1310NM DFB, PIN, OC-192 SR-1, STM I-64.1, 10GBASE-LR/LW, 120 - Trays |
| FTLX1412M3BTL | 功能描述:光纤发射器、接收器、收发器 PIN OC-192 SR-1, STM I-64.1 10GBASE-LR/LW RoHS:否 制造商:Omron Electronics 产品:Transmitters 数据速率:3.5 Gbps 波长:850 nm 最大工作温度: 最小工作温度: 封装 / 箱体: 封装: 工作电源电压: |
发布紧急采购，3分钟左右您将得到回复。