- 您现在的位置：买卖IC网 > Datasheet目录436 > FTLX1441E2 (Finisar Corporation)TXRX OPT X2 10 GB/S 1310NM Datasheet资料下载
参数资料
| 型号： | FTLX1441E2 |
| 厂商： | Finisar Corporation |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | TXRX OPT X2 10 GB/S 1310NM |
| 标准包装： | 1 |
| 波长： | 1310nm |
| 应用： | 以太网 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 连接器类型： | SC |
| 安装类型： | X2 MSA |
| 产品目录页面： | 326 (CN2011-ZH PDF) |
| 其它名称： | 775-1049 |
FTLX1441 Product Specification – December 2007
Environmental Performance
Operating case temperature:
Operating humidity:
0°C to +70°C
0% -95% RH non-condensing
Fibers and Connectors
The transponder has SC receptacles for both Tx and Rx. The transponder is designed for
single mode SC cables, 0° polished endface (PC).
70-pin Connector
The module interface connector is a 70-pin, printed circuit board edge connection with a
0.5 mm pitch. The appropriate mating connector for the customer PCB is a 70-pin SMT,
dual row, right angled, edge connector, 0.5 mm pitch (Tyco Electronics part number
1367337-1, Molex part number 74441-0003 or equivalent).
Rail Requirement
The X2 rail system required to mount the X2 module is fully defined by the MSA.
(Tyco Electronics part number 1367608-1: designed for belly to belly applications;
and 1367610-1: designed for single sided board mount to fit into the standard host PCB
footprint, or equivalent). For further details, please refer to vendor-supplied information.
Aqueous Wash
Finisar X2 transponders are neither solderable nor aqueous washable and are not
intended for these processes.
VI.
Regulatory Compliance
Feature
ESD:
Electrostatic Discharge to the
Electrical Pins (HBM)
Immunity:
Against Electrostatic Discharge
(ESD) to the Module Receptacle
Immunity:
Against Radio Frequency
Electromagnetic Field
Emission:
Electromagnetic Interference
(EMI)
Standard
EIA/JESD22-A114-B
(MIL-STD 883D
Method 3015.7)
EN 61000-4-2
IEC 61000-4-2
EN 61000-4-3
IEC 61000-4-3
FCC 47 CFR
Part 15, Class B
EN 55022 Class B
CISPR 22
Comments
Class 1a (> 500 V)
Discharges ranging from ± 2 kV to ± 25 kV to
the front end / faceplate / receptacle cause no
damage to module (under recommended
conditions).
With a field strength of 10 V/m, noise
frequency ranges from 10 MHz to 2 GHz. No
effect on module performance between the
specification limits.
Noise frequency range:
30 MHz to 40 GHz
Radiated emission does not exceed specified
limits when measured inside a shielding
enclosure with MSA conform cutout.
? Finisar Corporation – December 2007 Rev. B
Page 8
相关PDF资料 |
PDF描述 |
|---|---|
| FTLX1471D3BCL | TXRX SFP+ SGL 10GB/S 1310NM |
| FTLX1612M3BCL | 40K XFP OPTICAL TRANSCEIVER |
| FTLX1811M3 | TXRX OPT XFP 10 GB/S 1550NM |
| FTLX4213M3BCL | TXRX XFP 1550NM 10.5GB/S |
| FTLX8511D3 | TXRX OPT XFP 10 GB/S 850NM |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FTLX1441F2 | 制造商:FINISAR 制造商全称:FINISAR 功能描述:RoHS-6 Compliant 10GBASE-LR X2 Transponder |
| FTLX1442E2 | 功能描述:TXRX OPT X2 10 GB/S 1310NM RoHS:是 类别:光电元件 >> 光纤 - 收发器 系列:* 标准包装:20 系列:* |
| FTLX1451E2 | 制造商:FINISAR 制造商全称:FINISAR 功能描述:RoHS-6 Compliant 1310nm XPAK Transponder |
| FTLX1451E2S | 制造商:FINISAR 制造商全称:FINISAR 功能描述:RoHS-6 Compliant 1310nm XPAK Transponder |
| FTLX1451F2 | 制造商:FINISAR 制造商全称:FINISAR 功能描述:RoHS-6 Compliant 1310nm XPAK Transponder |
发布紧急采购，3分钟左右您将得到回复。