- 您现在的位置：买卖IC网 > PDF目录97426 > FTM-3128C-SL15BG FIBER OPTIC TRANSCEIVER, 1260-1360nm, 2488Mbps(Tx), 2488Mbps(Rx), LC CONNECTOR PDF资料下载
参数资料
| 型号： | FTM-3128C-SL15BG |
| 元件分类： | 光收发 |
| 英文描述： | FIBER OPTIC TRANSCEIVER, 1260-1360nm, 2488Mbps(Tx), 2488Mbps(Rx), LC CONNECTOR |
| 封装： | ROHS COMPLIANT PACKAGE |
| 文件页数： | 9/10页 |
| 文件大小： | 247K |
| 代理商： | FTM-3128C-SL15BG |
155M～2.67Gbps Spring-latch SFP Transceiver
15km transmission with monitoring function, RoHS compliant
June 11, 2007
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 8 of 10
(>0.8V, <2.0V):
Undefined
High (2.0~3.465V):
Transmitter Disabled
Open:
Transmitter Disabled
3. MOD-DEF 0,1,2 are the module definition pins. They should be pulled up with a 4.7k~10k
resistor on
the host board. The pull-up voltage shall be VccT or VccR.
MOD-DEF 0 grounded by the module indicates that the module is present
MOD-DEF 1 is the clock line of two-wire serial interface for serial ID
MOD-DEF 2 is the data line of two-wireserial interface for serial ID
4. LOS is an open collector output, which should be pulled up with a 4.7k~10k
resistor on the host board to
a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
In the low state, the output will be pulled to less than 0.8V.
5. These are the differential receiver outputs. They are AC-coupled 100 differential lines which should be
terminated with 100 (differential) at the user SERDES.
6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100 differential
termination inside the module.
Mechanical Design Diagram
The mechanical design diagram is shown in Figure 5.
Figure 5, Mechanical Design Diagram of SFP with Spring Latch
相关PDF资料 |
PDF描述 |
|---|---|
| FTR-1319-3D-DD | FIBER OPTIC TRANSCEIVER, 1270-1355nm, 1250Mbps(Tx), 1250Mbps(Rx), PANEL MOUNT |
| FTR-1319-3D | FIBER OPTIC TRANSCEIVER, 1270-1355nm, 1250Mbps(Tx), 1250Mbps(Rx), PANEL MOUNT |
| FTR-1519-V2 | FIBER OPTIC TRANSCEIVER, REPEATER, 1540-1570nm, 1250Mbps(Tx), 1250Mbps(Rx), PANEL MOUNT |
| FTR-8519-3-2.5 | FIBER OPTIC TRANSCEIVER, REPEATER, 820-860nm, 2125Mbps(Tx), 2125Mbps(Rx), PANEL MOUNT |
| FU-60RDF-S5M1 | FIBER OPTIC DFB LASER DIODE EMITTER, 1530-1570nm, 2500Mbps, THROUGH HOLE MOUNT, LC CONNECTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FTM-3128C-SL15EG | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:155M～2.67Gbps Spring-latch SFP Transceiver |
| FTM-3128C-SL15G | 制造商:Fiberxon Inc. 功能描述:FIBER OPTIC TRANSCEIVER, 1266-1360nm, 2488Mbps(Tx), 2488Mbps(Rx), LC CONNECTOR |
| FTM-3128C-SL15IG | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:155M～2.67Gbps Spring-latch SFP Transceiver |
| FTM-3128C-SL2EG | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:155M～2.67Gbps Spring-latch SFP Transceiver |
| FTM-3128C-SL2G | 制造商:SOURCE 制造商全称:Source Photonics, Inc. 功能描述:155M～2.67Gbps Spring-latch SFP Transceiver |
发布紧急采购，3分钟左右您将得到回复。