参数资料
型号: FX10A-120P/12-SV
厂商: Hirose Electric Co Ltd
文件页数: 26/26页
文件大小: 0K
描述: CONN HEADER 120POS W/POST SMD
标准包装: 60
系列: FX10
连接器类型: 接头,外罩触点
位置数: 120
间距: 0.020"(0.50mm)
行数: 2
安装类型: 表面贴装
特点: 板导轨,接地板,固定焊尾
触点表面涂层:
触点涂层厚度: 3.9µin(0.10µm)
包装: 托盘
配接层叠高度: 4mm
板上方高度: 0.138"(3.50mm)
其它名称: *FX10A-120P/12-SV
H2478
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX10 Series q 10 + Gbps 0.5mm pitch Stacking Connectors
s Recommended Temperature Profile
HRS test Conditions
Test board Glass epoxy 161mm∞100mm∞1.6mm thick
Solder method
Solder composition
Metal mask
Reflow cycles
:Reflow
:Paste,
96.5%Sn/3%Ag/0.5%Cu
:0.15mm thick
:2 cycles
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type,
volume/thickness and board size/thickness. Consult your
solder paste and equipment manufacturer for specific
recommendations.
s Washing Conditions
Organic Solvent Cleaning
Solvent
Room temperature washing Heated washing
IPA (Isopropyl alcohol)
HCFC (Hydrochlorofluorocarbon)
Yes
Yes
Yes
Yes
Water Type Cleaning
When using water based cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the
documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Cleaning Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the
deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed.
s Connector Handling Precautions
1. Allowable Creepage Dimensions at Time of Mating
The effective mating length of this product is 1.1 mm for the signal portion and 1 mm for the ground portion. The creepage of the
header and receptacle at the time of mating should be within 0.5 mm of the completely mating condition.
2. Retension of Boards
Avoid the support of boards by connectors alone and adopt a locking measure that does not rely on the connectors.
3. Solder Repair
Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair.
This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into
consideration prior to connector washing.
4. Miscellaneous
· Note that excessive twisting while inserting or withdrawing connectors will cause damage.
· The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance.
16
相关PDF资料
PDF描述
752241104GPTR7 RES ARRAY 100K OHM 22 RES 24-DRT
FX10A-80P/8-SV CONN HEADER 80POS W/POST SMD
752241104GTR7 RES ARRAY 100K OHM 22 RES 24-DRT
FX10A-100P/10-SV CONN HEADER 100POS W/POST SMD
4715MS-12T-B10-A00 FAN AC AXIAL 115V 119X38 1450RPM
相关代理商/技术参数
参数描述
FX10A-120P-SV 制造商:Hirose 功能描述:570-0042-2-00 EACH
FX10A-120P-SV(71) 功能描述:板对板与夹层连接器 HDR 120P W/POST SMT RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A
FX10A120P-SV(71) 制造商:Hirose 功能描述:
FX10A-120P-SV(91) 功能描述:板对板与夹层连接器 120P M HDR STRT SMT GIDE POST NO GRD PLT RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A
FX10A-120P-SV1(71) 功能描述:板对板与夹层连接器 HDR 120P W/POST SMT RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A