- 您现在的位置：买卖IC网 > PDF目录1356 > FX5-80S2A-DSAL (Hirose Electric Co Ltd)CONN RECEPT 80POS 1MM STR W/PIN PDF资料下载
参数资料
| 型号： | FX5-80S2A-DSAL |
| 厂商： | Hirose Electric Co Ltd |
| 文件页数： | 7/7页 |
| 文件大小： | 0K |
| 描述： | CONN RECEPT 80POS 1MM STR W/PIN |
| 标准包装： | 100 |
| 系列： | FX5 |
| 连接器类型： | 插座，外罩触点 |
| 位置数： | 80 |
| 间距： | 0.039"（1.00mm） |
| 行数： | 2 |
| 安装类型： | 通孔 |
| 特点： | 板锁 |
| 触点表面涂层： | 金 |
| 包装： | 散装 |
| 板上方高度： | 0.366"（9.30mm） |
| 其它名称： | *FX5-80S2A-DSAL |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FX5 products have been Pitch will be for soon. check the
All non-RoHS Series ● 1mm discontinued, Connector discontinued Vertical Please Connection products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B Connector Precautions
1. Tolerance Clearance on Mating Side
The effective connection clearance of the product is 1.6mm. Please use the
product so as to specify within 1mm the clearance between the header and
the receptacle in the connection process.
2. Header Connector Height
The SMT connector height doesn't include the solder paste thickness.
Thus, please consider that the stacking height will slightly increase after the
mounting process.
1
Mating Height: Low profile
Mating Height: High profile
FX5-*P-SH3
FX5-πP-SH
PCB
3. Screw Fastening Torque (SMT Type)
When the screw is fastened, please use the M2 screw. The recommended
PCB
A134
fastening torque is 0.15(N.m) max.
Plain sheet (t = 0.3)
Screw (M2)
4. Prefixed Process to Board (Through hole Type)
If the prefixed process is required for board mounting, please use the
prefixed pin type. (Applicable Thickness t = 1.6 ± 0.1)
Note:
When the connector is mounted on the board, the dip post is guided into the
board through-hole in order to prevent the dip post damage, and then insert
the board in parallel to the connector so as to push in the prefixed pin.
5. Plug and Play
When the connector is inserted or extracted in the active line state, please
contact HRS company.
6. Others
● It is noted that the forced excessive insertion/extraction will result in damage.
● Avoid holding the board with the connector only, and fix the board by any other
means except for the connector.
● The color phase of this product may be slightly different from that of the forming
product according to the manufacturing lot, but the difference doesn't affect the
performance.
Dip post
Nut (M2)
Board (t = 1.6)
Spring sheet (t = 0.5)
Prefixed pin
PCB
相关PDF资料 |
PDF描述 |
|---|---|
| FX6A-20S-0.8SV2 | CONN RECEPT 20POS .8MM W/O BOSS |
| FX8-90P-SV | CONN HEADER 90POS .6MM GOLD SMD |
| GMA.2B.045.RG | STRAIN RELIEF 4.5MM DIA GRAY |
| GRF1-J-P-08-E-ST-TH1-E | CONN MMCX JACK GANG 8POS PCB |
| GRF1-P-P-08-E-ST-TH1 | CONN MMCX PLUG GANG 8POS PCB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| FX5-80S2A-DSAL(71) | 功能描述:板对板与夹层连接器 REC 80POS 1MM STR W/PIN RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| FX5-80S3C-DSAL(72) | 功能描述:板对板与夹层连接器 80P STRT SMT RECEPT PCB LK CLP 3SEQ STRC RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| FX-588 | 制造商:SPC Multicomp 功能描述:MICROPHONE -85DB UNIDIRECTIONAL 16KHZ 制造商:SPC Multicomp 功能描述:MICROPHONE, -85DB, UNIDIRECTIONAL, 16KHZ; Directivity:Unidirectional; Output Impedance:500ohm; Frequency Response Min:50Hz; Frequency Response Max:16kHz; Sensitivity:-85dB 3dB at 1kHz; Device Type:Dynamic Microphone; Length:126mm ;RoHS Compliant: Yes |
| FX589 | 制造商:CMLMICRO 制造商全称:CML Microcircuits 功能描述:Low-Voltage/High-Speed GMSK Modem |
| FX589D5 | 制造商:CMLMICRO 制造商全称:CML Microcircuits 功能描述:Low-Voltage/High-Speed GMSK Modem |
发布紧急采购，3分钟左右您将得到回复。