参数资料
型号: G1426F2T
厂商: Global Mixed-mode Technology Inc.
元件分类: 音频放大器
英文描述: 2.2W Stereo Audio Amplifier
中文描述: 2.2W的立体声音频放大器
文件页数: 3/13页
文件大小: 282K
代理商: G1426F2T
Ver: 1.0
Dec 04, 2003
TEL: 886-3-5788833
http://www.gmt.com.tw
11
G1426
Global Mixed-mode Technology Inc.
Application Information
Bridged-Tied Load Mode Operation
G1426 has two linear amplifiers to drive both ends of
the speaker load in Bridged-Tied Load (BTL) mode
operation. Figure 1 shows the BTL configuration. The
differential driving to the speaker load means that
when one side is slewing up, the other side is slewing
down, and vice versa. This configuration in effect will
double the voltage swing on the load as compared to a
ground reference load. In BTL mode, the peak-to-peak
voltage VO(PP) on the load will be two times than a
ground reference configuration. The voltage on the
load is doubled, this will also yield 4 times output
power on the load at the same power supply rail and
loading. Another benefit of using differential driving
configuration is that BTL operation cancels the dc off-
sets, which eliminates the dc coupling capacitor that is
needed to cancelled dc offsets in the ground reference
configuration. Low-frequency performance is then lim-
ited only by the input network and speaker responses.
Cost and PCB space can be minimized by eliminating
the dc coupling capacitors.
SHUTDOWN Mode Operations
G1426 implements the shutdown mode operations
to reduce supply current, IDD, to the absolute mini-
mum level during nonuse periods for battery-power
conservation. When the shutdown pin (pin 1) is
pulled high, all linear amplifiers will be deactivated
to mute the amplifier outputs. And G1426 enters an
extra low current consumption state, IDD is smaller
than 2A. Shutdown pin should never be left un-
connected, this floating condition will cause the am-
plifier operations unpredictable.
Optimizing DEPOP Operation
Circuitry has been implemented in G1426 to mini-
mize the amount of popping heard at power-up and
when coming out of shutdown mode. Popping oc-
curs whenever a voltage step is applied to the
speaker and making the differential voltage gener-
ated at the two ends of the speaker. To avoid the
popping heard, the bypass capacitor should be
chosen promptly, 1/(CBx100k
) ≦ 1/(CI*(RI+RF)).
Where 100k
is the output impedance of the
mid-rail generator, CB is the mid-rail bypass capaci-
tor, CI is the input coupling capacitor, RI is the input
impedance, RF is the gain setting impedance which
is on the feedback path. CB is the most important
capacitor. Besides it is used to reduce the popping,
CB can also determine the rate at which the amplifier
starts up during startup or recovery from shutdown
mode.
De-popping circuitry of G1426 is shown on Figure 2.
The PNP transistor limits the voltage drop across
the 225k
by slewing the internal node slowly when
power is applied. At start-up, the voltage at
BYPASS capacitor is 0. The PNP is ON to pull the
mid-point of the bias circuit down. So the capacitor
sees a lower effective voltage, and thus the charg-
ing is slower. This appears as a linear ramp (while
the PNP transistor is conducting), followed by the
expected exponential ramp of an R-C circuit.
VDD
Vo(PP)
VDD
-Vo(PP)
2xVo(PP)
RL
Figure 1
VDD
Vo(PP)
VDD
-Vo(PP)
2xVo(PP)
RL
Figure 1
VDD
Vo(PP)+VDD/2
VDD/2
Vo(PP)
VDD/2
RL
Figure 2
VDD
Vo(PP)+VDD/2
VDD/2
Vo(PP)
VDD/2
RL
Figure 2
相关PDF资料
PDF描述
G1426F2U 2.2W Stereo Audio Amplifier
G1426 2.2W Stereo Audio Amplifier
G1427F31UF 2W Stereo Audio Amplifier
G1427F31U 2W Stereo Audio Amplifier
G1427 2W Stereo Audio Amplifier
相关代理商/技术参数
参数描述
G1426F2U 制造商:GMT 制造商全称:Global Mixed-mode Technology Inc 功能描述:2.2W Stereo Audio Amplifier
G1427 功能描述:安装硬件 RG 2.5-72-12 3.000 DIA BLACK RoHS:否 制造商:Harwin 类型:SMT Cable Clip 材料:Phosphor Bronze 安装孔大小: 长度:5 mm 外径: 内径: 厚度: 电镀:Tin 螺纹大小:
G1427F31U 制造商:GMT 制造商全称:Global Mixed-mode Technology Inc 功能描述:2W Stereo Audio Amplifier
G1427F31UF 制造商:GMT 制造商全称:Global Mixed-mode Technology Inc 功能描述:2W Stereo Audio Amplifier
G1428 制造商:GMT 制造商全称:Global Mixed-mode Technology Inc 功能描述:2W Stereo Audio Amplifier