参数资料
型号: G3MC-101PL-VD DC12
厂商: Omron Electronics Inc-IA Div
文件页数: 5/6页
文件大小: 0K
描述: RELAY MINI SSR 1A 12VDC PCB
其它有关文件: SSR Design Considerations
标准包装: 1
系列: G3MC
电路: SPST-NO(1 Form A)
输出类型: AC
负载电流: 1A
输入电压: 9.6 ~ 14.4VDC
电压 - 负载: 75 ~ 132 V
安装类型: 通孔
端接类型: PC 引脚
封装/外壳: 4-SIP
供应商设备封装: 4-SIP
包装: 散装
继电器类型: 继电器
其它名称: G3MC-101PL-VDDC12
G3MC101PLVD12DC
G3MC101PLVDDC12
G3MC1026C
Precautions
■ General Precautions
Do not touch the terminals of the SSR while power is being supplied
to the SSR. The terminals are charged with the power,
and an electric shock may be received by touching the terminals.
The built-in capacitor may have a residual voltage after the SSR
is turned off. Be sure to discharge the residual voltage before touch-
ing the terminals of the SSR, otherwise an electric shock
may be received.
■ Mounting
■ Protective element
No overvoltage absorption element is built in. Therefore, if the G3MC
is connected to an inductive load, be sure to connect the overvoltage
absorption element.
G3MC- @@@ PL (without Zero cross function)
1. Make sure that no excessive voltage or current is imposed on or
flows to the input or output circuit of the SSR,
Phototriac
Load
otherwise the SSR may malfunction or burn.
2. Solder the terminals of the SSR properly under the required sol-
dering conditions. The SSR may be abnormally heated and burn
Input
Protective
element
(MOV)
Power
supply
if power is supplied to the terminals soldered incorrectly.
3. Do not short-circuit the load of the SSR while power is supplied to
the SSR. Do not short-circuit the power supply through the SSR.
The SSR may be damaged, malfunction, or burn if the load or
power supply is short-circuited.
G3MC- @@@ P (with Zero cross function)
■ Correct use
Phototriac
Load
The terminals of the SSR are highly heat-conductive. Each terminal
must be soldered within 10 s at 260 ° C or within 5 s at 350 ° C.
Input
Protective
element
(MOV)
Power
supply
The SSR is of a thin-profile construction. To maintain the vibration
resistance of the SSR, make sure that the space between the SSR
and PCB is 0.1 mm maximum. Lifting of the PCB can be prevented
by setting the hole diameter of the PCBs on both sides slightly
smaller than the actual terminal dimension.
Select the model without the zero-cross function when using the Unit
for phase control output.
The casing works as a heat sink. When mounting two or more Units
closely, make sure that the Units are properly ventilated by taking
ambient temperature rises into consideration. If Units are closely
mounted and used in places with no ventilation, the load current of
each Unit must be 1/2 of the rated load current.
Solid State Relay
G3MC
405
相关PDF资料
PDF描述
TX2-4.5V-1 RELAY TELECOM DPDT 1A 4.5V
0395238019 5MM EURO PLUG STR GRN 19POS
1-641217-2 CONN RCPT 12POS 18AWG MTA-156
0395237019 5MM EURO PLUG STR GRN 19POS
4-641201-2 12P MTA100 CONN ASSY GRN LF
相关代理商/技术参数
参数描述
G3MC101PLVDDC24 制造商:OMRON AUTOMATION AND SAFETY 功能描述:RELAY MINI SSR 1A 24VDC PCB 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Relay SSR 28.8V DC-IN 1A 132V AC-OUT 4-Pin SIP
G3MC101PLVDDC5 制造商:OMRON AUTOMATION AND SAFETY 功能描述:RELAY MINI SSR 1A 5VDC PCB 制造商:OMRON INDUSTRIAL AUTOMATION 功能描述:Relay SSR 6V DC-IN 1A 132V AC-OUT 4-Pin SIP
G3MC-101P-VD DC12 功能描述:固态继电器-PCB安装 SOLID STATE RELAY RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT
G3MC-101P-VD DC24 功能描述:固态继电器-PCB安装 SOLID STATE RELAY RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT
G3MC-101P-VD DC5 功能描述:固态继电器-PCB安装 SOLID STATE RELAY RoHS:否 制造商:Omron Electronics 控制电压范围: 负载电压额定值:40 V 负载电流额定值:120 mA 触点形式:1 Form A (SPST-NO) 输出设备:MOSFET 封装 / 箱体:USOP-4 安装风格:SMD/SMT