- 您现在的位置：买卖IC网 > PDF目录21355 > G3TC-ODC24A DC24 (Omron Electronics Inc-IA Div)OUTPUT MODULE DC STD 18MA 24VDC PDF资料下载
参数资料
| 型号： | G3TC-ODC24A DC24 |
| 厂商： | Omron Electronics Inc-IA Div |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | OUTPUT MODULE DC STD 18MA 24VDC |
| 其它有关文件： | SSR Design Considerations |
| 标准包装： | 1 |
| 系列： | G3TC |
| 类型： | DC |
| 颜色： | 红 |
| 样式： | 标准型 |
| 输入电压： | 24VDC（18 ~ 32VDC） |
| 电流 - 输入： | 18mA |
| 输出电压： | 5 ~ 200VDC |
| 电流 - 输出： | 0.01 ~ 1A |
| 启动时间： | 0.10ms |
| 关闭时间： | 0.75ms |
| 特点： | 压紧螺钉 |
| 其它名称： | G3TC-ODC24ADC24 G3TCODC24ADC24 G3TCODC24ADC24NC |
Precautions
!WARNING
Do not touch the relay while power is supplied or immediately after
G3TC is turned OFF. Doing so may result in burns.
!WARNING
Do not touch the load terminal of the G3TC immediately after the
9. For a DC inductive load, a diode should be connected in parallel
with the load to absorb the counter electromotive force of the
load.
10. For an I/O mounting rack that is installed horizontally, use the
G3TC with loads that are within the following conditions.
G3TC-OAC5, -OAC5A, -OAC15, -OAC15A, -OAC24, -OAC24A
power is turned OFF, otherwise an electric shock may be received
due to the residual charge of the built-in C/R circuit.
!WARNING
Be sure to turn OFF the power supply to the G3TC before wiring,
otherwise an electric shock may result.
!WARNING
4
3
2.1
2
Horizontal Mo u nting
Ensure that a short-circuit current does not flow on the load side of
the SSR, otherwise the G3TC may be damaged.
1
■ General Precautions
0.64
At OMRON, we are constantly working to improve the quality and
reliability of our products. SSRs, however, use semiconductors,
which are prone to malfunction. Be sure to use SSRs within their
rated value. Use the SSR only in systems that are designed with
redundancies, flame protection, counter measures to prevent opera-
tion errors, and other countermeasures to prevent accidents involv-
ing human life or fires.
1. Do not apply excessive voltage or current to the input or output
circuit of the G3TC. Doing so may result in malfunction or burning.
2. Do not connect the input and output circuits incorrectly. Doing so
may result in malfunction or burning.
3. Do not obstruct the flow of air around the G3TC. Abnormal heat-
ing of the G3TC may result in short-circuiting of output elements
and burning.
■ Correct Use
Before Actual Operation
0
? 30 ? 20 0 20 40 45 60 70 8 0
Am b ient temperat u re ( ° C)
G3TC-ODC5, -ODC15, -ODC24
Horizontal Mo u nting
4
3
2.7
2
1
0.64
0
100
1. In actual operation, the G3TC may cause accidents that were
unforeseeable at the theoretical stage. Therefore, it is necessary
? 30 ? 20
0 20 40 45 60 70 8 0
Am b ient temperat u re ( ° C)
100
to test the G3TC under a variety of conditions that are possible.
As for the characteristics of the G3TC, it is necessary to consider
the differences between G3TC models.
2. The ratings in this datasheet are for testing in a temperature
range of 15 to 30 ° C, a relative humidity range of 25% to 85%, and
an atmospheric pressure range of 88 to 106kPa. When testing
operation, it is necessary to confirm correct operation not only
with the actual load that will be used, but also at the same ambi-
ent conditions as for actual operation.
3. The input circuitry does not incorporate a circuit protecting the
SSR from being damaged due to a reversed connection. Make
sure that the polarity is correct when connecting the input lines.
4. Only use the G3TC with loads that are within the rated values.
Using the G3TC with loads outside the rated values may result in
malfunction, damage, or burning.
5. Use a power supply within the rated frequency range. Using a
power supply outside the rated frequency range may result in
malfunction, damage, or burning.
6. No over-voltage absorption element is built in. Therefore, if the
G3TC is connected to an inductive load, be sure to connect an
over-voltage absorption element.
7. As protection against accidents due to short-circuiting, be sure to
install protective devices, such as fuses on the power supply side.
8. Keep wiring separate from high-voltage power lines and use wires
of an appropriate length, otherwise malfunction and damage may
result due to induction.
428
Solid State Relays for Industrial I/O
G3TC
相关PDF资料 |
PDF描述 |
|---|---|
| EP3024 | PANEL STEEL 28.2X22.2" WHT |
| 1585H15D1 | POWER STRIP 48" 15A 15OUT 15' |
| EP2430 | PANEL STEEL 22.2X28.2" WHT |
| G3TC-ODC15A DC15 | OUTPUT MODULE DC STD 18MA 15VDC |
| 3-644579-3 | CONN RCPT 3POS 24AWG MTA-100 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| G3TCODC24ADC24NC | 制造商:OMRON AUTOMATION AND SAFETY 功能描述:OUTPUT MODULE DC STD 18MA 24VDC |
| G3TCODC24DC24 | 制造商:Omron Industrial Automation 功能描述:RELAY; 18 TO 32 VDC; 18 MA (MAX.); SOLID STATE; 9 A @ 10 MS; 45 % TO 85 % 制造商:Omron Electronic Components LLC 功能描述:Relay SSR 18mA 32V DC-IN 3A 60V DC-OUT 4-Pin 制造商:OMRON AUTOMATION AND SAFETY 功能描述:OUTPUT MODULE DC STD 18MA 24VDC |
| G3TC-ODC24-DC24 | 功能描述:固态继电器-工业安装 RED 24DC INPUT 60VDC DC OUTPUT RoHS:否 制造商:Crydom 控制电压范围:4 VDC to 32 VDC 负载电压额定值:7 VDC to 72 VDC 负载电流额定值:160 A 触点形式: 输出设备:SSR 安装风格:Panel |
| G3TC-ODC5 | 制造商:OMRON 制造商全称:Omron Electronics LLC 功能描述:Solid State Relays for Industrial I/O |
| G3TC-ODC5 DC5 | 功能描述:OUTPUT MODULE DC STD 18MA 5VDC RoHS:是 类别:继电器 >> I/O 继电器模块 - 输出 系列:G3TC 其它有关文件:Declaration of Conformity 标准包装:25 系列:SM 类型:DC 颜色:红 样式:迷你型 输入电压:5VDC（2.75 ~ 8VDC） 电流 - 输入:18mA 输出电压:1 ~ 50VDC 电流 - 输出:0.001 ~ 5A 启动时间:1ms 关闭时间:0.05ms 特点:卡入式引脚固定器 其它名称:SMODC5ML |
发布紧急采购，3分钟左右您将得到回复。