- 您现在的位置：买卖IC网 > PDF目录7831 > G6JU-2FL-Y DC4.5 (Omron Electronics Inc-EMC Div)RELAY TELECOM DPDT 1A 4.5V PDF资料下载
参数资料
| 型号： | G6JU-2FL-Y DC4.5 |
| 厂商： | Omron Electronics Inc-EMC Div |
| 文件页数： | 10/12页 |
| 文件大小： | 0K |
| 描述： | RELAY TELECOM DPDT 1A 4.5V |
| 产品培训模块： | Medical Solutions |
| 产品目录绘图： | G6J(U)-2(FL,FS) Series G6J(U)-2FL Series Footprint G6JU - Latching Circuit |
| 标准包装： | 50 |
| 系列： | G6J-Y |
| 继电器类型： | 电信 |
| 线圈类型： | 锁存，单线圈 |
| 线圈电流： | 22mA |
| 线圈电压： | 4.5VDC |
| 触点形式： | DPDT（2 C 型） |
| 触点额定值（电流）： | 1A |
| 切换电压： | 125VAC，110VDC - 最小值 |
| 关闭电压（最大）： | 3.38 VDC |
| 安装类型： | 表面贴装 |
| 端接类型： | 鸥翼型 |
| 包装： | 管件 |
| 触点材料： | Silver（Ag），Gold（Au） |
| 操作时间： | 3ms |
| 释放时间： | 3ms |
| 线圈功率： | 100 mW |
| 线圈电阻： | 204.3 欧姆 |
| 工作温度： | -40°C ~ 85°C |
| 产品目录页面： | 2589 (CN2011-ZH PDF) |
| 其它名称： | G6JU-2FL-Y-DC4.5 G6JU2FLYDC45 Z2147 |
Precautions
Correct Use
Long Term Current Carrying
Under a long-term current carrying without switching, the insulation
resistance of the coil goes down gradually due to the heat generated
b y the coil itself. Furthermore, the contact resistance of the Relay will
gradually b ecome unsta b le due to the generation of film on the con-
tact surfaces. A Latching Relay can b e used to prevent these pro b -
lems. When using a non-latching relay, the design of the fail-safe
circuit provides protection against contact failure and open coils.
Handling of Surface-mounting Relays
Use the Relay as soon as possi b le after opening the moisture-proof
package. If the Relay is left for a long time after opening the mois-
ture-proof package, the appearance may suffer and seal failure may
occur after the solder mounting process. To store the Relay after
opening the moisture-proof package, place it into the original pack-
age and seal the package with adhesive tape.
When washing the product after soldering the Relay to a PCB, use a
water- b ased solvent or alcohol- b ased solvent, and keep the solvent
temperature at less than 40 ° C. Do not put the relay in a cold cleaning
b ath immediately after soldering.
Soldering
Solder: JIS Z3282, H63A
Soldering temperature: Approx. 250°C (At 260°C if the DWS method
is used.)
Soldering time: Approx. 5 s max. (Approx. 2 s for the first time and
approx. 3 s for the second time if the DWS method is used.)
Be sure to adjust the level of the molten solder so that the solder will
not overflow onto the PCB.
Claw Securing Force During Automatic Insertion
During automatic insertion of Relays, make sure to set the securing
force of the claws to the following values so that the Relay character-
istics will b e maintained.
Maximum Voltage
The maximum voltage of the coil can b e o b tained from the coil tem-
perature increase and the heat-resisting temperature of coil insulat-
ing sheath material. (Exceeding the heat-resisting temperature may
result in b urning or short-circuiting.) The maximum voltage also
involves important restrictions. Maximum voltage:
? must not cause thermal changes or deterioration of the insulating
material.
? must not cause damage to other control devices.
? must not cause any harmful effect on people.
? must not cause fire.
Therefore, b e sure not to exceed the maximum voltage specified in
the catalog.
As a rule, the rated voltage must b e applied to the coil. A voltage
exceeding the rated value, however, can b e applied to the coil pro-
vided that the voltage is less than the maximum voltage. It must b e
noted that continuous voltage application to the coil will cause a coil
temperature increase which could deteriorate the coil insulation,
shorten the relay’s electrical life, or affect various characteristics of
the relay.
Coating
Relays mounted on PCBs may b e coated or washed. Do not apply
coatings or detergents containing silicone.
Other Handling
Dropping the relay may impose excess shock that exceeds the spec-
ifications. Do not use any relay that has b een dropped.
C
B
A
Direction A: 4.90 N max.
Direction B: 9.80 N max.
Direction C: 9.80 N max.
Secure the claws to the area indicated b y shading.
Do not attach them to the center area or to only part of the Relay.
Environmental Conditions During Operation, Storage,
and Transportation
Protect the Relays from direct sunlight and keep the Relays under
normal temperature, humidity, and pressure.
Mounting Latching Relays
The Latching Relays are reset b efore shipping. If excessive vi b ration
or shock is imposed, however, the Latching Relays may b e set acci-
dentally. Be sure to apply a reset signal b efore use. Make sure that
the vi b ration or shock that is generated b y other devices on the same
panel does not exceed the rated value of the Latching Relays.
52
Surface-mounting Relay
G6J-Y
相关PDF资料 |
PDF描述 |
|---|---|
| GNR30DHZ | RELAY SSR 30A W/HEATISNK DC IN |
| 0395333906 | 5.08MM EURO PLUG STR BLK 6POS |
| 3/4-5-4949 | TAPE VHB BLACK 3/4" GEN PURPOSE |
| 84134860 | SSR IP00 DC 15A/100VDC DC INPUT |
| 0395333806 | 5.08MM EURO PLUG STR BLK 6POS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| G6JU2FLYDC5 | 制造商:Omron Electronic Components LLC 功能描述:EM RLY DPDT 1A 5VDC 245.5OHM SMD - Rail/Tube 制造商:Omron Electronic Components LLC 功能描述:RELAY TELECOM DPDT 1A 5V |
| G6JU-2FL-Y-DC5 | 功能描述:低信号继电器 - PCB Gullwing 1Coil Latch DPDT 5VDC 140mW RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| G6JU-2FL-Y-DC5V | 制造商:Omron Electronic Components LLC 功能描述:Surface Small Slim Relay |
| G6JU-2FL-Y-TR DC12 | 功能描述:低信号继电器 - PCB SMT Tape & Reel Latching Relay RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
| G6JU-2FL-Y-TR DC24 | 功能描述:低信号继电器 - PCB SMT Tape & Reel Latching Relay RoHS:否 制造商:NEC 触点形式:2 Form C (DPDT-BM) 触点电流额定值: 线圈电压:5 V 最大开关电流:1 A 线圈电流:1 A 线圈类型:Non-Latching 功耗:140 mW 端接类型:SMT 绝缘: 介入损耗: |
发布紧急采购，3分钟左右您将得到回复。