Infrared detector module with preamp
Metal dewar type
HAMAMATSU PHOTONICS K.K., Solid State Division
1126-1 Ichino-cho, Hamamatsu City, 435-8558 Japan, Telephone: (81) 053-434-3311, Fax: (81) 053-434-5184, http://www.hamamatsu.com
U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 08152-3750, Fax: (49) 08152-2658
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777
North Europe: Hamamatsu Photonics Norden AB: Smidesvgen 12, SE-171 41 Solna, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. 2001 Hamamatsu Photonics K.K.
Cat. No. KIRD1024E02
Nov. 2001 DN
WAVELENGTH (m)
10
9
0
10
12
10
11
10
13
123456789
10
11
12
13
(Typ. T= -196 C)
14
λ
D
*
(cm
Hz
/W)
1
2
G7754-01
P7751-01/-02
P7752-10
G7754-03
11
LN2
FILL PORT
AMP
8.6 ± 1
125.5 ± 1
51.2
70.0
6.5
18 32
37
±
0.5
10
WINDOW
16
(MCT
ONLY:
13.5)
63.5 ± 1
89.5
8.5
172
±
1
SIGNAL OUTPUT (BNC)
DC INPUT VOLTAGE
±15 V (4-PIN CONNECTOR)
FOAM POLYSTYRENE PLUG
PUMP-OUT PIPE
49
PHOTOSENSITIVE
SURFACE
KIRDA0010EB
s Spectral response
KIRDB0076EC
s Dimensional outline (unit: mm)
s Precaution for use
The detector should not be placed horizontally during use.
Using these detectors in an environment subjected to vibration may cause microphonic noise. Take measures to prevent
vibration as needed.
2