GI1-1200 THRU GI1-1600
MINIATURE HIGH VOLTAGE GLASS PASSIVATED RECTIFIER
Reverse Voltage - 1200 to 1600 Volts
Forward Current - 1.0 Ampere
FEATURES
High temperature metallurgically bonded construction
Glass passivated cavity-free junction package
1.0 Ampere operation at
TA=75°C with no thermal runaway
Typical IR less than 0.1A
Hermetically sealed package
Capable of meeting environmental standards of
MIL-S-19500
High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
GI1-1200
GI1-1400
GI1-1600
UNITS
Maximum repetitive peak reverse voltage
VRRM
1200
1400
1600
Volts
Maximum RMS voltage
VRMS
840
980
1120
Volts
Maximum DC blocking voltage
VDC
1200
1400
1600
Volts
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=75°C
I(AV)
1.0
Amp
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
30.0
Amps
Maximum instantaneous forward voltage at 1.0A
1.1
3.14A
VF
1.3
Volts
Maximum DC reverse current
TA= 25°C
10.0
at rated DC blocking voltage
TA=100°C
IR
100.0
A
Maximum reverse recovery time (NOTE 1)
tfr
25.0
s
Maximum forward recovery time (NOTE 2)
trr
1.0
s
Typical junction capacitance (NOTE 3)
CJ
15.0
pF
Typical thermal resistance (NOTE 4)
R
ΘJA
55.0
°C/W
Operating junction and storage temperature range
TJ,TSTG
-65 to +175
°C
NOTES:
(1) Measured on Tektronix Type "S" recovery plug-in, Tektronix 545 scope or equivalent IFM=20mA, IRM=2mA
(2) Measured on Tektronix Type "S" recovery plug-in, Tektronix 545 or equivalent, IFM=20mA
(3) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(4) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted
4/98
PA
TENTED*
0.034 (0.86)
0.028 (0.71)
DIA.
0.150 (3.8)
0.100 (2.5)
DIA.
1.0 (25.4)
MIN.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
DO204AP
Dimensions in inches and (millimeters)
*Brazed-lead assembly is covered by Patent No. 3,930,306