- 您现在的位置：买卖IC网 > PDF目录20960 > GLC110-215 (SL Power Electronics Manufacture of Condor/Ault Brands)PWR SPLY SWITCHER 110W MULTI PDF资料下载
参数资料
| 型号： | GLC110-215 |
| 厂商： | SL Power Electronics Manufacture of Condor/Ault Brands |
| 文件页数： | 1/2页 |
| 文件大小： | 0K |
| 描述： | PWR SPLY SWITCHER 110W MULTI |
| 标准包装： | 1 |
| 系列： | GLC110 |
| 类型： | 标准产品 |
| 输出数： | 2 |
| 输出电压： | ±15V |
| 输入电压： | 90 ~ 264VAC |
| 输出 - 1 @ 电流（最大）： | 15 VDC @ 5A |
| 输出 - 2 @ 电流（最大）： | -15 VDC @ 2.5A |
| 功率（瓦特）： | 110W |
| 电源类型： | 开关（开放框架） |
| 应用： | 商用 |
| 安装类型： | 底座安装 |
| 尺寸/尺寸： | 7.00" L x 4.25" W x 1.30" H（177.8mm x 108.0mm x 33.0mm） |
| 工作温度： | 0°C ~ 50°C |
| 效率： | 85% |
| 电源（瓦特）- 最大： | 110W |
| 批准： | CE，CSA，IEC，UL |
| 线路调节： | 2% |
| 负载调整： | 2% |
| 相关产品： | 271-2297-ND - COVER FOR GLC75-110 SERIES SPLY 271-1137-ND - COVER FOR GLC75-110 SERIES SPLY |
| 其它名称： | 271-2206 |
GLC110 Commercial/GLM110 Medical
110 Watt Global Performance Switchers
GLOBAL PERFORMANCE SWITCHERS
FEATURES:
? Cost-effective power source
? Single- and dual-output units
? Low height (1.30”)
? 2-year warranty
? Power fail signal standard
? Commercial Approved to UL60950-1, EN60950-1,
CSA22.2 No. 950-95 3rd Ed.
? Medical Approved to UL2601-1, EN60601-1,
CSA-C22.2 No. 601.1
? Complies with EN61000-3-2 Class A
? RoHS Compliant Model Available (G suffix)
SPECIFICATIONS
Ac Input
90-264 Vac, 47-63 Hz single phase.
Input Current
Maximum input current at 90 Vac, 60 Hz with full rated output load not to
exceed 2.9 A.
Hold-up Time
20 ms minimum from loss of ac input at full load, nominal line (120 Vac).
Output Power
Normal continuous output power is 75 W for unrestricted natural convection,
or 110 W with 26 cfm air flow.
Output Regulation
Load regulation on dual output models is measured by ±40% load change
from 60% rated load and input voltage change from minimum to maximum
ratings.
Output #1 requires 1A minimum load for proper regulation of other outputs.
Initial set tolerance is measured with all outputs at 60% of full rated load.
Load regulation for single-output models measured by changing load from
5% to 50% load or 50% to full load in either direction.
Voltage Adjustment
Output #1 adjustment is ±5%. Note: output #1 must not be more than 1%
below nominal to achieve full output regulation on output #2. High voltage
settings may degrade the reliability of the unit due to excessive power
Transient Response
Main Output: 500 μs typical response time for return to within 0.5% of final value
for a 50% load step change, ?i/?t<0.2 A/μs. Maximum voltage deviation is 3.5%.
Startup/shutdown overshoot less than 3%. Turn-On Time less than 1 second at 120
Vac, 25.
Overvoltage Protection
Built in on main output.
Efficiency
72-85% depending on model.
Input Protection
Internal ac fuse provided on all units. Designed to blow only if a catastrophic
failure occurs in the unit.
Inrush Current
Inrush limited by internal thermistors. Inrush at 240 Vac, averaged over the first ac
half-cycle under cold start conditions will not exceed 37 A.
Temperature Coefficient
0.03%/°C typical on all outputs.
EMI/EMC Compliance
All models include built-in EMI filtering to meet the following emissions require-
ments:
dissipation in some outputs.
EMI SPECIFICATIONS
COMPLIANCE LEVEL
Overload Protection
Fully protected against short circuit and output overload. Short circuit protec-
tion is cycling type power limit. Factory set to begin power limiting at 120 W.
Output Noise
0.5% rms, 1% pk-pk, 20 MHz bandwidth, differential mode. Measured with
noise probe directly across output terminals of the power supply.
POWER FAIL
Power fail signal is TTL or CMOS compatible (output goes low <0.5 V) 5 ms
before output voltage drops more than 4% below nominal voltage upon
loss of AC power. The signal is factory set to trip on 84 to 94 Vac brown-out
depending upon incoming line impedance and distortion. Other settings are
available to the user through adjustment of built in potentiometer (consult
factory for assistance). Output will stay low for 20 ms minimum.
Conducted Emissions GLC110 EN55022 Class B; FCC Class B
Conducted Emissions GLM110 EN55011 Class B: FCC Class B
Static Discharge EN61000-4-2, 6 kV contact, 8 kV air
RF Field Susceptibility EN61000-4-3, 3 V/meter
Fast Transients/Bursts EN61000-4-4, 2 kV, 5 kHz
Surge Susceptibility EN61000-4-5, 1 kV diff., 2 kV com.
Line Frequency Harmonics EN61000-3-2 Class A
Commercial Safety
All GLC models are approved to UL60950-1, CSA22.2 No. 950-95 3rd Ed, and
EN60950-1.
Medical Safety
All GLM models are approved to UL2601-1, CSA-C22.2 No. 601.1, EN60601-1.
All specifications are typical at nominal input, full load at 25 O C unless otherwise stated
相关PDF资料 |
PDF描述 |
|---|---|
| P51-200-G-O-M12-4.5OVP-000-000 | SENSOR 200PSI 7/16-20UNF 2B 4.5V |
| P51-75-S-G-P-4.5V-000-000 | SENSOR 75PSI 1/8-27NPT .5-4.5V |
| GLC110-212 | PWR SPLY SWITCHER 110W MULTI |
| REC3-2415SRWZ/H2/A/CTRL | CONV DC/DC 3W 9-36VIN 15VOUT |
| REC7.5-123.3DRW/H2/A/M | CONV DC/DC 7.5W 9-18VIN +/-3.3V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| GLC110-215G | 功能描述:线性和开关式电源 110W +/-15V RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| GLC110-24 | 功能描述:线性和开关式电源 110W 24V @ 3.2A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| GLC110-24G | 功能描述:线性和开关式电源 110W 24V @ 3.2A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度: |
| GLC110-28 | 制造商:SL Power Electronics 功能描述:- Bulk |
| GLC110-28G | 功能描述:POWER SUPPLY SWITCHER 110W 28V RoHS:是 类别:电源 - 外部/内部（非板载） >> AC DC 转换器 系列:GLC110 产品培训模块:MP Modular-Configurable AC-DC Power Supply 特色产品:Configurable Power Supplies 标准包装:1 系列:MP |
发布紧急采购，3分钟左右您将得到回复。